Trustfire Battery 16340, PCB protected

A protected cell from Trustfire, designed for flashlights, model building, and laser pointers. Not suitable for: Lumapower IncenDio V3X model. IC protection/PCB with short circuit, overcharge, and deep discharge protection. Trustfire 16340 PCB protected.

Capacity: 880 mAh, min. capacity: 750 mAh, nominal voltage: 3.6V - 3.7V, charge termination voltage: 4.2V ± 0.05V, discharge termination voltage: 2.75V, charge current: 0.1A - 0.5A, positive terminal raised (Button Top), chemistry: LiCoO2 (ICR), integrated protection circuit PCB, diameter: 16.4 mm ± 0.1 mm, height: 36.1 mm ± 0.15 mm, weight: 18 g.

Safety notes: Please note that removing or damaging the protective electronics (PCB) can lead to a short circuit, fire, or explosion.

Additional features: Lithium-ion batteries are thermally stable and do not suffer from memory effect. They operate on the basis of lithium and are characterized by a high energy density.

Technical specifications for "Trustfire 16340 880mAh 3.6V - 3.7V PCB protected":

Notes: Charging lithium-ion batteries requires a special charger that charges the batteries according to a specific charging method (CCCV = constant current, constant voltage). The batteries must not be charged beyond a voltage of 4.2 volts, as this poses a risk of fire and explosion. It is advisable to charge the batteries only up to about 4.1 volts, as this significantly increases their lifespan or number of charge cycles (potentially up to doubling). Only lithium-ion chargers should be used for charging. However, cheap chargers often have the disadvantage of not safely shutting off after the charging process is complete, continuing to charge the batteries with a small current, which can be dangerous.

Furthermore, batteries and accumulators must not be disposed of in household waste! Please dispose of them as required by law at municipal collection points.