Sakata 3d SAKATA Filament PLA Ingeo 3D870 white 1.0kg 2.85mm

PLA Ingeo 3D870 white 2.85mm 1kg - High impact strength PLA prints like PLA but is more impact resistant than ABS, even without post heat treatment. The new high temperature PLA Ingeo 3D870 prints with ease and has the potential for dimensional stability (HDT) up to 110 °C depending on post processing.

Easy post-processing: Place the finished printed object in an oven preheated to approximately 80 - 100 °C for 10 - 15 minutes. Turn off the oven and let the object cool down. After cooling, the object is temperature resistant up to at least 90 °C. PLA Ingeo 3D870 HT is a robust and high-quality 3D filament made from biological raw materials, suitable for all common FDM printers. It is easy to handle and therefore ideally suited for demanding 3D printing.

Despite the slightly modified composition, our filament retains the familiar and typical properties of PLA printing. It is slightly more stable and less brittle than ordinary PLA. Due to a lower shrinkage factor (1 - 1.5%), our PLA Ingeo 3D870 will deform only slightly when cooling down. Polylactic acid is a biodegradable plastic made from renewable, natural resources and has thus become the most popular material for 3D printing.

Print temperature: 190-230 °C
Post-treatment temperature: 80 - 110 °C
Heating bed temperature: Not absolutely necessary due to the low warp effect. Recommended approximately 50 - 70 °C or 3DLac or Magigoo.
Warp effect: very low

Coil size:
Coil diameter: 200 mm
Coil height: 70 mm
Hub hole diameter: 53 mm

Storage: Cool and dry (15-25 °C) and away from UV light. This will greatly improve the shelf life. Each desktop 3D printer has its own unique characteristics. Therefore, you may need to adjust the temperature settings to achieve the best results. To get the best results for your prints, consider variables such as nozzle diameter of your 3D printer, print speed settings, and layer height.