Rs Pro RS Glow in the Dark PLA 2.85mm 1kg

Printing technology: FDM
Printing media: PLA
Device-specific: No
Color: Glow-in-the-dark, green
Weight: 1 kg
Diameter: 2.85 mm

Due to its low tendency to warp, PLA can be printed without a heated bed. If a heated bed is used, the recommended temperature is approximately 35–60 °C. PLA can be used with all common 3D desktop printers that utilize FDM or FFF technology. Storage: cool and dry (15–25 °C) and protected from UV light. This significantly increases shelf life. PLA filaments for 3D printers, 2.85 mm, 1 kg. Robust, easy-to-use high-quality PLA filaments, ideal for 3D printing. The slightly modified filament retains the typical properties of PLA but is tougher and less brittle. Due to the low shrinkage factor, PLA does not deform after cooling. Polylactic acid is a biodegradable plastic made from renewable natural resources and is one of the most popular materials for 3D printing. Harder and less brittle compared to conventional PLA. Easy to print at low temperatures. Low warping. Biodegradable. Low odor. After purchase, it is important to store the filament properly to maintain quality. Over time, the plastic absorbs moisture from the air, leading to small water bubbles in the filament. These bubbles quickly reach boiling point when heated in the extruder nozzle, causing damage to the print. The use of desiccants to absorb moisture is strongly recommended.