
Wattstunde SunFolder+
340 W, 9.42 kg
Wattstunde SunFolder+
340 W, 9.42 kg
Hoi - I think directly from the manufacturer here: https://www.wattstunde.de/produkte/solarmodule/sunfolder-solartaschen.html and here: https://www.wattstunde.de/files/wattstunde/Datenblatt/Technische%20Daten/Datenblatt%20SF%20Sunfolder%2B%20v0222.pdf So: Connection: Anderson Rated power: 340Wp ... Hope that helps and LG
WS140SF indicates 140W, which I was able to confirm with a quick web search. Hopefully Galaxus will find time to add this.
Yes, I am very satisfied with the WS200SF SunFolder+ (200 W, 6.80 kg). If your ECO Flow Pro has a direct input for a solar panel, no additional charge controller is necessary. This should be stated in the operating instructions of the ECO Flow Pro. Attention with 200 watts of solar power, only a maximum of 2 kWh of electricity can be stored on a summer day under ideal conditions. That is neither enough for heating nor for cooking!
Unfortunately, this is not possible directly, as the panel supplies around 33V. You have to connect a charge controller in between. At full power, the battery is charged with up to 28A, so the Victron Energy SmartSolar 100/30 MPPT, which I use, is suitable.
Yes, no problem if it can dry afterwards. However, it is not suitable for continuous use in wind and weather. It is a mobile folding panel.
In the case of the EcoFlow brand, the panels should be used from their own company so as not to damage the unit.
Thank you very much for pointing this out. We will adjust this immediately.
According to the check and information from the dealer, the data and the 90W are correct.
No is not included. I use the Victron Energy SmartSolar 100/15 MPPT solar charge controller 12V/24V battery - works great.
there are 3 panels, 130cm wide, measured without the flap of the pocket, with flap open ca 150cm, high ca 82cm (I can confirm)
The solar bag is supplied with a 4.80 metre long and permanently mounted cable. This leads into an Anderson plug. The bag is always supplied with a coupling to the charge controller. This has an Anderson plug and crimped wire end sleeves for connection to the charge controller.
Exactly, this is the latest generation with the bypass diode.
Speedy0404 the WS140SF has the following dimensions: Dimensions (closed) 560 x 440 x 22.5 mm Dimensions (open) 560 x 1325 x 7.5 mm The data on Digitec are correct :)
14 of 14 questions