CHF139.– currently CHF173.– new
Ubiquiti Us-8-60w
8 ports
Questions about Ubiquiti Us-8-60w
What would you like to know?
0 questions and answers
Maybe production was stopped, I don't know. There must be some reason.
What do you mean by house distribution? Another switch?
You can connect the AP AC Lite to the switch without any problem.
Hello,
I don't have a power supply unit myself, but you could also use a POI injector, then you won't need to install a power supply unit at the installation site.
Helpful answer
You would have had to make a backup of the configuration of the console on the old Mac and restore this backup on the new console. If this is no longer possible, then you would have to reset the individual devices and set them up again.
Yes, you can operate the two Nanos on the US-8-60W without any problems, or if you don't want a PoE switch, you can also use the PoE adapters supplied. In my opinion, however, operation with a PoE switch is more elegant.
Hi
Am I correct in assuming that you have a radius server in your topology, with which the attached clients should authenticate themselves? If yes: It simply forwards the radius traffic, nothing more. If no: I can quickly check how you want it.
As a rule, all Unifi switches can be integrated and managed via the Unifi Management Console (be it the one in the Cloudkey, the self-installed one on a pot or the one in the Dreammachine).
Hope that helps
LG
All APs that support 802.3af PoE. For example, UAP AC Lite, UAP AC LR, UAP AC Pro, Unifi 6 Lite... can be found on the UI homepage in the specs under PoE Mode.
Hoi I don't know which 5-pack you were looking at. There are different versions of the switch. The one with 60w POE costs 119 so 595chf. Then there is the 150w POE and the one without. The latter would be the cheapest.
This switch does not have a web interface. You must adopt it via the UniFi Controller software.
See https://dl.ubnt.com/qsg...
If you can't find the switch, I would connect a PC directly to the switch via cable and run the controller software on the PC.
I don't use the software but a cloud key because I have several other Ubiquiti components.
I think the only other way to access the switch is via SSH.
Helpful answer
If you simply connect the switch to the router, it will run with a default configuration. That hardly makes sense, you could have bought a much simpler and cheaper switch.
I run the controller software on a Windows PC. With it I can configure the Ubiquiti devices, view statistics, etc. If the controller software is not active, the switch continues to run exactly the same. There is only a gap in the statistics.
Helpful answer
This switch has 4 802.3af PoE ports. According to the compatibility list from Ubiquity, the UAP-AC-LITE should also support 802.3af from "board revision 33": https://help.ui.com/hc...
Since Digitec also lists 802.3af PoE in the specifications of the UAP-AC-LITE, I assume that they have at least this board revision and should therefore work.
Helpful answer
I have 2 Ubiquiti UniFi AP NanoHD connected to the US-8-60W PoE ports and both are working properly.
Hello alone
Where exactly do you see that this switch should have a "router capability"?
It certainly doesn't.
If you want a router from Ubiquiti with a connection to the UniFi controller, you would have to buy one of the USGs.
Helpful answer
Yes and no. A USG and an active Unifi instance are required (e.g. Unifi CloudKey). So the device alone can't do it.
Sorry, typed it wrong (should be an answer, not a question) and somehow can't delete it :-(
What does your question mean? Note that this is a 5-piece set (-5) and therefore the price already has advantages over the single price (instead of CHF 645 currently). If you are looking for a single switch, you must order the other item, US-8-60W, without -5.
Helpful answer
Hello Andi19801. The switch does not interrupt the Internet per se. However, there is a variant that has a time-controlled effect on the Switch: In the administration console of the USG, you can activate a scheduled upgrade under services. I would take a look at the events and alerts. An interruption at the same time sounds more like the router used (forced interruption). This all depends on the setup. What is displayed in the Ubiquiti dashboard under devices for uptime (for the switch)?
Helpful answer
I only activated IGMP snooping on the controller. Nothing else was necessary.
Helpful answer
Yes. According to the data sheet for the switch, a maximum of 15.4 W can be drawn per port. The AP-Pro requires a maximum of 9 W.
Helpful answer
Hello, please contact customer service, the community cannot help.
digitec@digitec.ch
+41 44 575 95 00
Pack of 5 Vs. 1 piece
No power supply unit is included in the 5-pack.
Former user
8 years ago
Helpful answer
Yes, this switch has 4 POE ports to which you can connect the video and AP products from Ubiquiti... Of course also others... ;-)
Concerning the exchange you have to contact Digitec directly...
I would ask the customer service, the delivery date always refers to the order date.
30 of 31 questions