Samsung QE32LS03T The Frame 4.0
32", QLED, Full HD, 2020
Questions about Samsung QE32LS03T The Frame 4.0
What would you like to know?
0 questions and answers
so if you screw a tilt and swivel device behind it, you will never get the effect of a picture.
this said, you can take any wall mount that suits your needs, screw a base plate onto it and mount the original wall mount on it, e.g. 6mm plywood sprayed anthracite.
lets tinker 😉
Yes, the stand is included. It is located on the back of the TV.
That's so!
I think it could only work with a "tinkering solution"... Only 2 screws are screwed into the frame and these are pushed into the wall brackets.
No, unfortunately not. You must use the wall bracket supplied with the TV. Greetings
Dear Andreas, unfortunately I can't tell you that. My TV only runs via 5gHz WiFi.
yes, no problem, but unlike its bigger brothers, this TV only has wifi and no connection option for a LAN cable, which is problematic with HD films and causes picture jerking. So you need a good and fast wifi connection. lg
Helpful answer
But it has one on the back of the TV. The connect box doesn't have one, that's true.
Unfortunately, there is no Invisible cable with the 32" frame, only a thicker grey cable (about 2m or so). It is a different box with different One-Connect compared to the larger frame. Not comprehensible. I almost sent the product back...
Helpful answer
Is included! Mounting plate, screws & dowels included.
Yes
Yes he did!
Unfortunately, I couldn't find anything about energy consumption, but maybe Samsung can help you out directly:
https://www.samsung.com/at...
I have exactly the same question. Have you already received an answer or have you found a solution or an extension cable?
Thank you very much for your efforts.
It depends on your wall. If you mean the diameter, it should be the same or minimally smaller than the dowel.
The Samsung The Frame does not have a VESA standard suspension on the back. I used a 1mm wire rope to go around the two screws.
the two screws, clamped the ends with an eyelet and soldered the two ends with soft solder. I fixed the television with
with a screw on the wire rope.
Helpful answer
External dimensions with coloured frame: 73x42,5x3 cm (3 cm from the wall)
It was supplied like this - I don't know the reason either.... ???
Helpful answer
A Qled television has a commercially available LED illumination of the LCD. It only works with an additional filter. Not to be confused with Philips and LG's Oled (O = Organic) which has a self-luminous panel and therefore also an immense contrast.
I stream conferences via it - the resolution is good but connecting is quite fiddly.
With this 32 version, you do not seem to be able to tilt the TV away from the wall from above. However, you can tilt it a little to the left/right if the holes are not drilled perfectly....
30 of 30 questions