
Panasonic SC-PMX94
Bluetooth, CD player, 2x 60 W
Panasonic SC-PMX94
Bluetooth, CD player, 2x 60 W
According to the information in the operating instructions: DAB outdoor antenna F connector (75 Ohm), DAB ANT/FM ANT/ (75 Ohm) with Note: Be sure to tighten the nut completely. Place the antenna where the reception is best. Adhesive tape for fixing the antenna (not supplied)
Hello jazzouz That sounds like double signal amplification to me. Have you ever connected the record player without phono preamplifier to the Panasonic SC-PMX94 (Audio In)? There are turntables with and without preamplification, I don't know what you have. More detailed information about the record player (for example: Sony PSL-X310BT) would help. Lg Easyk
1 month ago
It is possible to connect a vinyl record player to the Audio IN input, but this usually requires a phono preamplifier to adapt the signal. Make sure your record player has a built-in preamplifier or use an external preamplifier to connect the signal correctly to the stereo system.
Automatically generated from the .Thank you for your feedback, we will be happy to pass this on.
Thank you very much for pointing this out. We will be happy to pass this on internally so that it can be checked.
2 months ago
The stereo does not allow direct connection of a vinyl turntable, as it does not receive an audio signal as input, only as output. Although it has an audio input port, Panasonic specifies that this model can only emit an audio signal, but not receive one, which prevents the direct connection of a conventional vinyl turntable without an external phono preamp. To connect a vinyl turntable, you would therefore need a phono preamp between the turntable and the stereo system.
Automatically generated from the .5 months ago
You can connect your own floorstanding speakers to the system as long as they are compatible with the output power and connection options of the device. The speakers supplied are specially optimised for the system, but it is technically possible to use other speakers if they meet the same requirements. Make sure that the speakers are compatible with the output power of 2x 60 watts and have the correct connections.
Automatically generated from the .5 months ago
Other speakers cannot be connected directly to the Panasonic SC-PMX94 as it does not provide separate speaker connections for external speakers. The system comes with built-in speakers that are specifically designed for the system. However, if you need to connect to another device such as a TV or soundbar, you can use the optical output or aux input to route the signal to another device.
Automatically generated from the .Good day Since I can't test this, I unfortunately don't know. I can only say that the smartphone connection works via Bluetooth. Greetings Manfred
no external antenna is required for DAB radios
9 months ago
The Panasonic SC-PMX94 device is equipped with DAB+ reception capability, but not specifically for DAB+ via cable (DAB+ Cable). Here are some important points: - The device supports DAB+ reception, but this is typically realised via an aerial and not via cable. - The term "DAB+ Cable ready" means that the device should be prepared to receive DAB+ signals via a cable connection, but this is not the case for the SC-PMX94. - As your test did not find any DAB+ stations, this indicates that the device is not capable of receiving DAB+ signals via cable. To receive DAB+ via cable, you would probably need an additional DAB+ receiver or another device specifically designed for cable reception.
Automatically generated from the .I can't answer this question because I don't own an Apple device. I would certainly not buy the SC-PMX94 again because 1. the sound is underground and 2. Panasonic support is non-existent. Have a good day anyway, Rolf
here are the operating instructions....https://www.bedienungsanleitu.ng/panasonic/sc-pmx94/anleitung
There are only 2 speaker connections. That means only 2 speakers.
I would send it back for examination with your commentary
I would contact Panasonic support. I have found them to be competent and helpful.
The cable should be provided yes :) If needed, please contact us by email. https://helpcenter.digitec.ch/hc/fr/requests/new
I have not used the Bluetooth function so far, so I cannot answer this question. I mainly use DAB+ and CD player with this unit.
This must clearly be a defect. Send the radio in for repair.
You can play music from your iPhone via the bluetooth function without any problems.
30 of 59 questions