CHF68.90
Hähnel Captur
Funk
Questions about Hähnel Captur
What would you like to know?
0 questions and answers
Is there a cable set for the brand new Sony cameras (like the Sony A7 V) that only have USB-C ports?
I was able to carry out a search and unfortunately could not find another cable set that is guaranteed to be compatible. According to the manufacturer, this set is compatible with the following models: A1 / A7 / A7MarkII / A7MarkIII / A7R / A7RMarkII / A7RMarkIII / A7RMarkIV/ A7S / A7SMarkII / A7SMARKIII/ A9 / A9MarkII / A58/ A68/ A3000 / A3500 / A5000 / A5100 / A6000 / A6100 / A6300 / A6400 / A6500 / A6600 / HX50 / HX50V / HX60 / HX60V / HX80 / HX300 / HX400 / HX400V / NEX-3N / RX10 /RX10MarkII / RX10Mark III / RX10MarkIV/ RX100 / RX100MarkII / RX100MarkIII / RX100MarkIV/ RX100MarkV/ RX100Mark VI / RX100MarkVII / WX500 / ZV-1
digitec
6 months ago
Helpful answer
The remote triggers are not compatible with Nikon Z models. They are designed for various Nikon DSLR models such as D200, D300, D750, D800, D810 and Coolpix P7800, but no Z models are mentioned in the compatibility list.
Automatically generated from the .
According to our information, this remote trigger is compatible with all DSLR cameras and flash units.
I do not know if they added the cabke to the kit, but last time I bought the kit, it was NOT present. As the Sony A7C is relatively new, I hope that the cable will be included in a near future...
Helpful answer
List
https://www.hahnel.ie/irish-shop/captur_cable_pack_for_canon/
C1-C1 (2,5mm)
C3-C1 (Canon-2,5mm)
https://photo-shop-studio.com.au/adapters-cables-extensions/viltrox-c1-c3-shutter-release-cable-2-5mm-for-canon-1dx-5dsr-7d-7dii-6d-5d/
No idea, I have the module for Nikon. I'm sure it's also available for Sony. Works 1A.
Yes, also use it for the a7II
This is the correct Sony cable. However, this would be the correct shutter release for Sony. Hähnel Captur Wireless Remote Shutter Release Sony (Wi-Fi)
Yes of course, various plugs are included
Hello, yes, it also fits mark iii.
Yes, these two products are compatible with each other. :)
Helpful answer
I use the adapter on a CANON EOS 80D. In addition, I use a "C1 cable" (mini jack) on the remote trigger port and connect it to the receiver on the hot shoe and the radio transmitter is then in my hand.
See page 2 in the PDF: https://asset.conrad.com/media10/add/160267/c1/-/gl/001549924ML01/bedienungsanleitung-1549924-haehnel-captur-remote-canon-fernausloeser.pdf
According to the manufacturer, the following cameras are supported:
Canon: EOS-1D / EOS-1DMarkII / EOS-1DMkIIN / EOS- 1DMark III / EOS- 1DMark IV / EOS-1DC / EOS-1DS / EOS-1DSMark II / EOS-1DX / EOS-1DXMark II / EOS-5D / EOS-5DMark II / EOS-5DMark III / EOS-5DMarkIV / EOS-5DS / EOS-5DSR / EOS-6D / EOS-6DMarkII / EOS-7D / EOS-7DMark II / EOS-10D / EOS-20D / EOS-20DS / EOS-30D / EOS-40D / EOS-50D / EOS-60D / EOS-70D / EOS-77D / EOS-80D / EOS-90D / EOS-100D / EOS-200D / EOS-250D / EOS-300D / EOS-350D / EOS 400D / EOS-450D / EOS-500D / EOS-550D / EOS-600D / EOS-650D / EOS-700D / EOS 750D / EOS-760D / EOS-800D / EOS-1000D / EOS-1100D / EOS-1200D / EOS-1300D / EOS-2000D / G1X / G1XMarkII /G1XMark III / G3X / G5X / G10 / G11 / G12 / G15 / G16 / EOS-M5 /EOS-M6 /EOS-M6MarkII / EOS-R / EOS- RP
Pentax: K1 / K1MarkII / K3/ K3MarkII / K-5 / K-5MarkII / K-5MarkIIS / K-7 / K-10/ K-20 / K-30 / K-50 / K-100 / K110 / K-200 / K-500
Samsung: GX10/ GX20
Source: https://www.haehnel-foto.de/irish-shop/captur_for_canon
I do not know what HSS is. With my camera (Nikon D500) and the 2 modules, triggering the camera works without any problems if the connection between the transmitter and the receiver is correctly established.
Enclosed are all compatible devices:
Fujifilm FinePix HS20EXR, HS25EXR, HS30EXR, HS35EXR, S100FS, S200EXR, S205EXR, X30; X Series X100T, X30, X-A1, X-A2, X-E1, X-E2, X-E2S, X-M1, X-S1, X-T1, X-T10.
Helpful answer
It should work for triggering. I only use this on the Sony A7Riii via the cable. I am very satisfied.
Yes, a short cable from the receiver to the camera is included.
Helpful answer
The boxes are delivered with cables allowing the connection to the box.
It is therefore necessary to check the compatibility with your case (the list of models is given in the detailed description)
Dear Messdo4175, within the radius of the transmitter it doesn't matter where you stand, in front of or behind the camera. Unfortunately, sometimes the set goes off and you have to re-pair it, so my advice is to always have the wired trigger with you as a spare.
Yes, this should be compatible with the D7200. The appropriate cable is also supplied in the Nikon set, I believe.
The remote control works for autofocus, continuous shooting, long time and self-timer. It can also be used as a flash trigger. It works with the following Olympus products: FZ200, FZ150, FZ100, FZ60, FZ50, FZ30, FZ20, G10, G6, G5, G3, G2, G1, GF1, GH1, GH2, GH3, GH4, L10, L1, LC1, DMC-GH4.
Helpful answer
Hello,
Looking in the manual, I found this: "If a consumer is interested in purchasing just the Captur
Module Pro, they would need to purchase the branded Cable
Set & connect the Module Pro direct to the camera."
So I think it is not included and you will have to buy with the "Canon Cable Pack"
Sincerely,
Flux
i don't change anything. focus by pressing lightly on the shutter release button and release by pressing it down. works fine. why don't you ask the manufacturer hanel.de?
If the cameras have a connection for remote controls, then yes:
https://drive.google.com/file/d/0B4QLiDpgZZIwcU5yQ19mb0V0Rm8/view
30 of 36 questions