CHF1429.–
G.Skill Trident Z Neo
2 x 32GB, 3200 MHz, DDR4-RAM, DIMM
Questions about G.Skill Trident Z Neo
What would you like to know?
0 questions and answers
Helpful answer
Unfortunately, we do not have any information on this at the moment. Should the product become available to us through our suppliers, we can check a possible inclusion.
No, they are Hynix. I think A-Die.
Helpful answer
it should be a setting in the bios or icue, they always go off for me...
Former user
4 years ago
Former employee
4 years ago
Helpful answer
Yes, this RAM is compatible.
Don't see why it shouldn't work on this board.
I have them installed on an X570-E with a Ryzen 7 5800x and have had no problems so far.
Greetings
Helpful answer
Yes, 3600Mhz is a good fit for the Ryzen 3950X and this motherboard. Please note that x570 and this CPU do not support quad channel memory and you may want to go for 2 x 16Gb modules unless you absolutely want to occupy all slots. 👍
Yes, they are compatible. With the Dragon Centera programme, you can control everything with the right drivers. Asus aura is standard there.
Hi, it will work but if you are into optimization take rather the RGB trident which are for intel the neo trident are more opti for AMD but will also work for Intel no problem.
Yes, they are compatible.
Should perform well, but I'm not familiar with the A-XMP function of the mainboard.
43.62 mm incl. contacts
Helpful answer
I have just put this exact combination into operation and so far it works perfectly. However, I had to adjust the RAM speed in the bios from 2666 to 3200 Mhz.
According to
https://dlcdnets.asus.com/pub...
the memory should be compatible.
Helpful answer
For me, that would probably not fit. I already had problems with my water cooling or the hose outputs. I can only operate my mainboard with 2x Ram modules. But I think that is also a little dependent on the respective mainboard. Maybe someone knows another solution.
Yes it is supported (in case of Ryzen 3000 anyway).
The is a list of supported memory on this mainboard on the vendor website.
Yes it is also Intel compatible, you can check the list of Intel compatible motherboards here :https://www.gskill.com/qvl...
...sure!
Yes, that is possible.
Helpful answer
That should work
Helpful answer
I also searched for a while, just go to EZ Mode (F7) and activate XMP Mode. (https://rog.asus.com/forum...). Then reboot and everything works.
Helpful answer
Hello,
I recently bought the bars together with the 3900x and the Asus TUF Gaming X-570. They work perfectly, even with the XMP/D.C.O.P setting. Difference between the N and NC model is the latency: N has 16-16-16-36, NChat 16-19-19-39 (all according to G.Skill homepage).
Helpful answer
Hallo, here you will find your information.
https://www.gskill.com/product...)
Hello, this memory module is not on the compatibility list.
https://www.msi.com/Motherboar...
they just about fit (if all specifications are correct), but you have nothing from rgb, because everything is just covered up
30 of 31 questions