Questions about AsRock B450M Steel Legend

jap

Hehe then quickly get a new PC ;-) Yes you can, see in the specs https://www.asrock.com/MB/AMD/B450M%20Steel%20Legend/#Specification and the QVL: https://www.asrock.com/MB/AMD/B450M%20Steel%20Legend/#MemoryMS

So the graphics card goes safely with the mainboard, it also has an RGB connection with 3 and 4 pins.

Yes, it is possible. Software is called AsRock PolyChrome

I had a quick look at the product pictures for you: Yes. ..and googled for you: Yes, a 7.1 CH HD audio (Realtek ALC892/897 audio codec) according to the manufacturer's website: https://www.asrock.com/mb/amd/b450m%20steel%20legend/

Hello, yes it has :-)

Yes it has. argb (5V) x 1 and 2 x 12V.

Check the ASRock website or write to their support, they should know. My board was already 3rd Gen Ryzen Ready at the time, but I don't know if they still produce motherboards that they can update with the latest generation BIOS.

Is that a question? The board has M.2, as you can see in the picture. More detailed information can be found in the specifications on the manufacturer's website.

Show the constellation, which components you have installed. Are all cables plugged in properly? CPU power cable connected? RAM correctly mounted? Power supply switched on? Have you bridged the pins of the power button?

Yes, uATX and mATX are the same. If the case supports mATX, you can install this motherboard!

Small update for all those who want to buy the same motherboard for a 3rd Gen Ryzen: My board was delivered 3000-Series ready, IT IS NOT NECESSARY TO UPDATE THE BIOS! However, there must be a sticker on the box that says so. Just install the CPU and off you go :)

Oui, 1x USB 3.1 Gen2 à l'arrière. Yes, 1x USB 3.1 Gen2 on the back.

No, unfortunately we do not offer that.

That depends entirely on the time of production. It is not possible to answer this question. The only way to find out would be to check the serial number with the manufacturer.

...natürlich: https://www.asrock.com/mb/AMD/B450M%20Steel%20Legend/index.asp#CPU

Should work after a BIOS update.