PPprint P-adhesive 220 330mm x 340mm

PPprint P-adhesive 220 330x340mm 'P-adhesive 220' is a temperature-stable double-sided adhesive film. It can be used to fix 'P-surface 141' in many printers on the corresponding printer beds. P-adhesive 220' bonds 'P-surface' in case the self-adhesive properties are not sufficient. Application of 'P-adhesive 220' Before applying 'P-adhesive 220' the surface of your print bed must be thoroughly cleaned and dry. To fix 'P-adhesive 220', slowly peel off the silicone protection paper on one side and start fixing with the hand roller 'P-roller 621' while continuing to slowly peel off the silicone paper. If air bubbles are trapped, they can be removed afterwards by piercing with a thin needle. To do this, press out the air with the help of the hand roller 'P-roller621'. After 'P-adhesive 220' has been successfully applied, the upper silicone protective paper can be removed. The application of 'P-surface 141' is done in the second step in the same way. See also description 'P-surface 141' for further information. Please note that small bubbles may appear during the heating process. Therefore, it is recommended to repeat the pressing process again shortly before 3D printing on the heated print bed. If 'P-surface 141' and 'P-adhesive 220' no longer adhere to the print bed and can no longer be fixed, a new 'P-advesive 220' film must be used.