Panasonic Akku NCR18650PF – (NCR18650PD) + Lötfahne Z

The successor to the Panasonic NCR18650PD. A cell specifically developed for e-bikes and electric mobility with 2900mAh LiNiCoAlO2. Due to its high load capacity and nominal voltage, this battery is recommended in several e-cigarette forums. The Hilumin solder tab is spot-welded and measures: Width: 10 mm, Length: 25 mm. Panasonic NCR18650PF unprotected + solder tab Z. These items are custom-made and cannot be exchanged!

Capacity: 2900mAh
Min. Capacity: 2750mAh
Nominal Voltage: 3.7V
Charge End Voltage: 4.2V
Max. Discharge Current: 3C 10A
Max. Charge Current: 0.7C
Discharge End Voltage: 2.5V
Protection: none
Positive Terminal: flat (Flat Top)
Chemistry: LiNiCoAl
Diameter: 18.1 mm ± 0.1 mm
Height: 64.95 mm ± 0.1 mm
Weight: 46 g ± 1 g
Charging Method: CC-CV

Safety Instructions: Lithium cells should only be operated with protective electronics! Please note that lithium cells may only be used by authorized personnel. Improper handling or short circuits can lead to fire or explosion.

Additional Features: Lithium-ion batteries are thermally stable and do not suffer from memory effect. They operate on the basis of lithium and are characterized by high energy density.

Technical Data for "Panasonic NCR18650PF – 2900mAh, 3.7V (NCR18650PD) + Solder Tab Z". Notes: Charging lithium-ion batteries requires a special charger that charges the batteries according to a specific charging method (CCCV = constant current, constant voltage). The batteries must not be charged above a voltage of 4.2 volts, as this poses a risk of fire and explosion. It is advantageous to charge the batteries only up to about 4.1 volts, as this significantly increases their lifespan and number of charge cycles (potentially doubling it). Only lithium-ion chargers should be used for charging.