Jeti Voltage/current sensor MUI 150 A 2.4EX duplex (8595245909604)

The MUI sensors are designed for measuring voltages, currents, and consumed battery capacity in the model. The JETIBOX terminal is used to display the measured values, and the DUPLEX system 2.4GHz is used for wireless transmission of the information. The DUPLEX system utilizes the 2.4GHz band for communication, allowing for the transmission of remote control data to the model as well as data from the model back to the transmitter. The telemetric data obtained during operation are transmitted in real time, and the current status of the measured quantities can be displayed on the LCD screen of the JETIBOX.

The MUI telemetric sensors allow you to measure voltages and currents in your model and transmit this information using the DUPLEX system (receiver and transmitter module). Thanks to the high current measurement accuracy, these sensors enable tracking of the consumed capacity of the measured battery. In addition to the duration of the current passage, the MUI unit also records the average and maximum values of the current. Furthermore, it provides the exact voltage values as well as their minimum and maximum values.

The JETIBOX terminal is used for setting parameters and displaying the measured values. The MUI sensors enable the setting of an acoustic signal when set parameters are exceeded. This alarm signal can be set for the measurement of the maximum current, minimum voltage, and for the maximum permissible capacity consumption. The acoustic signal is generated by the transmitter module via a built-in sound generator. Individual alarm messages are distinguished from each other by the assignment of a Morse alphabet letter. The acoustic signals for parameter overruns are generated even if no JETIBOX is connected. When a JETIBOX is connected, the LCD display shows which parameter has been exceeded. In the event that several parameters are exceeded, the acoustic signals and LCD display alternate.