HPE ProLiant DL380 Gen10 (Intel Xeon Silver 4110, 32GB, 3.5")

Model

ProLiant DL380 Gen10 (Intel Xeon Silver 4110, 32GB, 3.5")

Description

The HPE ProLiant DL380 Gen10 server is part of HPE's new 10th generation line of servers offering greater performance along with hardware-based security features to deliver the world's most secure industry-standard servers. The DL380 platform is the data center standard for multi-workload compute applications.…more

Specifications

Click 'show more' to display specifications.

General information
Manufacturer	HPE
Product type	Servers
Item number	6422583
Manufacturer no.	868710-B21
External links	Manufacturer's site (de)

Hardware form factor i Hardware form factor A form factor describes the different sizes and standards of a system or major system components.
rackable	Yes
Number of rack units	2 U
Design	rack

Processor i Processor A processor is a key component of a computing device, which steers other components via software. The fundamental property of a processor is its programmability. The behaviour of a processor is determined by programmers by means of computer code. The main processor components are the register, arithmetic and logic unit (ALU), control unit and the memory management unit (MMU), which administers memory. Central tasks of a processor include arithmetic operations, reading and writing data in the memory as well as executing programme jumps.
Processor type i Processor type Describes the type of processor.	Intel Xeon Silver 4110
Number of processors i Number of processors Describes how many processors the device has. A central processing unit (CPU), also referred to as a central processor unit, is the hardware within a computer that carries out the instructions of a computer program by performing the basic arithmetical, logical, and input/output operations of the system. More information...	1 x
Processor clock frequency i Processor clock frequency In electronics and especially synchronous digital circuits, a clock signal is a particular type of signal that oscillates between a high and a low state and is utilized like a metronome to coordinate actions of circuits. Although the word signal has a number of other meanings, the term is here used for "transmitted energy that can carry information". A clock signal is produced by a clock generator. Although more complex arrangements are used, the most common clock signal is in the form of a square wave with a 50% duty cycle, usually with a fixed, constant frequency. Circuits using the clock signal for synchronization may become active at either the rising edge, falling edge, or, in the case of double data rate, both in the rising and in the falling edges of the clock cycle. More information...	2.10 GHz
Number of threads i Number of threads In computer science, a thread of execution is the smallest unit of processing that can be scheduled by an operating system. The implementation of threads and processes differs from one operating system to another, but in most cases, a thread is contained inside a process. Multiple threads can exist within the same process and share resources such as memory, while different processes do not share these resources. In particular, the threads of a process share the latter's instructions (its code) and its context (the values that its variables reference at any given moment). To give an analogy, multiple threads in a process are like multiple cooks reading off the same cook book and following its instructions, not necessarily from the same page. More information...	16
Number of processor cores i Number of processor cores A multi-core processor (or chip-level multiprocessor, CMP) combines two or more independent cores (normally a CPU) into a single package composed of a single integrated circuit (IC), called a die, or more dies packaged together. A dual-core processor contains two cores, and a quad-core processor contains four cores. More information...	8 i 8 The processor has eight cores.
Number of processors socket	2 x
Max. turbo clock rate i Max. turbo clock rate Using the Intel Turbo Boost Technology, the frequency of the processor can be dynamically increased in operation	3 GHz
Max. TDP i Max. TDP The thermal design power (TDP), sometimes called thermal design point, refers to the maximum amount of power the cooling system in a computer is required to dissipate. For example, a laptop's CPU cooling system may be designed for a 20 watt TDP, which means that it can dissipate up to 20 watts of heat without exceeding the maximum junction temperature for the computer chip. It can do this using an active cooling method such as a fan or any of the three passive cooling methods, convection, thermal radiation or conduction. Typically, a combination of methods is used. The TDP is typically not the most power the chip could ever draw, such as by a power virus, but rather the maximum power that it would draw when running "real applications". This ensures the computer will be able to handle essentially all applications without exceeding its thermal envelope, or requiring a cooling system for the maximum theoretical power (which would cost more but in favor of extra headroom for processing power). More information...	85 W
L3 Cache i L3 Cache Another issue is the fundamental tradeoff between cache latency and hit rate. Larger caches have better hit rates but longer latency. To address this tradeoff, many computers use multiple levels of cache, with small fast caches backed up by larger slower caches. Multi-level caches generally operate by checking the smallest Level 1 (L1) cache first; if it hits, the processor proceeds at high speed. If the smaller cache misses, the next larger cache (L2) is checked, and so on, before external memory is checked. As the latency difference between main memory and the fastest cache has become larger, some processors have begun to utilize as many as three levels of on-chip cache. More information...	11 MB
Processor family i Processor family The family the processor belongs to.	Xeon

Motherboard properties
CPU socket i CPU socket A CPU socket or CPU slot is a mechanical component that provides mechanical and electrical connections between a microprocessor and a printed circuit board (PCB). This allows the CPU to be replaced without soldering. Common sockets have retention clips that apply a constant force, which must be overcome when a device is inserted. For chips with a large number of pins, either zero-insertion force (ZIF) sockets or land grid array (LGA) sockets are used instead. These designs apply a compression force once either a handle (for ZIF type) or a surface plate (LGA type) is put into place. This provides superior mechanical retention while avoiding the risk of bending pins when inserting the chip into the socket. More information...	Socket P
Chipset i Chipset The chipset supports the processor in its task. More information...	Intel C621

Memory i Memory Computer data storage, often called storage or memory, is a technology consisting of computer components and recording media used to retain digital data. It is a core function and fundamental component of computers. More information...
Memory type i Memory type DDR-SDRAM ("Double Data Rate Synchronous Dynamic Random Access Memory") is a type of random access memory (RAM) currently available in three categories. DDR-SDRAM with 184 contacts, DDR2-SDRAM with 240 contacts and DDR3-SDRAM also with 240 contacts. They are mainly used for memory modules of the DIMM or SO-DIMM standard as main memory in PCs and laptops. More information...	DDR4-RAM
Memory Slots max	12
Storage capacity 1 (RAM) i Storage capacity 1 (RAM) Random access memory (usually known by its acronym, RAM) is a type of computer data storage. Today it takes the form of integrated circuits that allow the stored data to be accessed in any order, i.e. at random. More information...	16 GB
RAM total i RAM total Random access memory (usually known by its acronym, RAM) is a type of computer data storage. Today it takes the form of integrated circuits that allow the stored data to be accessed in any order, i.e. at random. More information...	32 GB
Max. RAM i Max. RAM Working memory is the system that actively holds multiple pieces of transitory information in the mind, where they can be manipulated. This involves execution of verbal and nonverbal tasks—such as reasoning and comprehension—and makes them available for further information-processing. More information...	1536 GB
RAM speed	2666 MHz

Data storage controller i Data storage controller Serial ATA (SATA) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. More information...
RAID configuration i RAID configuration RAID (redundant array of independent disks, originally redundant array of inexpensive disks) is a storage technology that combines multiple disk drive components into a logical unit. Data is distributed across the drives in one of several ways called "RAID levels", depending on what level of redundancy and performance (via parallel communication) is required. More information...	0 i 0 (block-level striping without parity or mirroring) has no (or zero) redundancy. It provides improved performance and additional storage but no fault tolerance. More information... , 1 i 1 (mirroring without parity or striping), data are written identically to two drives, thereby producing a "mirrored set"; the read request is serviced by either of the two drives containing the requested data, whichever one involves least seek time plus rotational latency. More information... , 5 i 5 (block-level striping with distributed parity) distributes parity along with the data and requires all drives but one to be present to operate; the array is not destroyed by a single drive failure. More information... , 6 i 6 Ein RAID-60-Verbund besteht aus einem RAID-0-Array, das mehrere RAID 6 kombiniert. Hierzu sind mindestens zwei Controller mit je vier Festplatten, also gesamt acht Festplatten, notwendig. Prinzipiell skalieren sich die Unterschiede von RAID 5 und RAID 6 hoch auf die Unterschiede zwischen RAID 50 und RAID 60: Der Durchsatz ist geringer, während die Datensicherheit höher ist. Der gleichzeitige Ausfall von zwei beliebigen Laufwerken ist jederzeit ohne Datenverlust möglich; weitere Ausfälle sind nur dann unkritisch, wenn maximal zwei Platten je gestriptem RAID 6 betroffen sind. More information... , 10 i 10 Ein RAID-10-Verbund ist ein RAID 0 über mehrere RAID 1. Es werden dabei die Eigenschaften der beiden RAIDs kombiniert: Sicherheit und gesteigerte Schreib-/Lesegeschwindigkeit. Ein RAID-10-Verbund benötigt mindestens vier Festplatten. More information... , 50 i 50 Ein RAID-50-Verbund besteht aus einem RAID-0-Array, das aus mehreren striped RAID 5 besteht. Ein RAID-50-Verbund benötigt mindestens sechs Festplatten, beispielsweise zwei RAID-5-Controller mit jeweils drei Platten pro Controller zusammengeschaltet mit einem Software-Stripe RAID 0. Das garantiert einen sehr hohen Datendurchsatz beim Schreiben und Lesen, da die Rechenarbeit auf zwei XOR-Units verteilt wird. Ein RAID-50-Verbund wird bei Datenbanken verwendet, bei denen Schreibdurchsatz und Redundanz im Vordergrund stehen. More information... , 60 i 60 Ein RAID-60-Verbund besteht aus einem RAID-0-Array, das mehrere RAID 6 kombiniert. Hierzu sind mindestens zwei Controller mit je vier Festplatten, also gesamt acht Festplatten, notwendig. Prinzipiell skalieren sich die Unterschiede von RAID 5 und RAID 6 hoch auf die Unterschiede zwischen RAID 50 und RAID 60: Der Durchsatz ist geringer, während die Datensicherheit höher ist. Der gleichzeitige Ausfall von zwei beliebigen Laufwerken ist jederzeit ohne Datenverlust möglich; weitere Ausfälle sind nur dann unkritisch, wenn maximal zwei Platten je gestriptem RAID 6 betroffen sind. More information... , 10ADM , 1ADM
Possible raid configuration	0 i 0 (block-level striping without parity or mirroring) has no (or zero) redundancy. It provides improved performance and additional storage but no fault tolerance. More information... , 1 i 1 (mirroring without parity or striping), data are written identically to two drives, thereby producing a "mirrored set"; the read request is serviced by either of the two drives containing the requested data, whichever one involves least seek time plus rotational latency. More information... , 5 i 5 (block-level striping with distributed parity) distributes parity along with the data and requires all drives but one to be present to operate; the array is not destroyed by a single drive failure. More information... , 6 i 6 Ein RAID-60-Verbund besteht aus einem RAID-0-Array, das mehrere RAID 6 kombiniert. Hierzu sind mindestens zwei Controller mit je vier Festplatten, also gesamt acht Festplatten, notwendig. Prinzipiell skalieren sich die Unterschiede von RAID 5 und RAID 6 hoch auf die Unterschiede zwischen RAID 50 und RAID 60: Der Durchsatz ist geringer, während die Datensicherheit höher ist. Der gleichzeitige Ausfall von zwei beliebigen Laufwerken ist jederzeit ohne Datenverlust möglich; weitere Ausfälle sind nur dann unkritisch, wenn maximal zwei Platten je gestriptem RAID 6 betroffen sind. More information... , 10 i 10 Ein RAID-10-Verbund ist ein RAID 0 über mehrere RAID 1. Es werden dabei die Eigenschaften der beiden RAIDs kombiniert: Sicherheit und gesteigerte Schreib-/Lesegeschwindigkeit. Ein RAID-10-Verbund benötigt mindestens vier Festplatten. More information... , 50 i 50 Ein RAID-50-Verbund besteht aus einem RAID-0-Array, das aus mehreren striped RAID 5 besteht. Ein RAID-50-Verbund benötigt mindestens sechs Festplatten, beispielsweise zwei RAID-5-Controller mit jeweils drei Platten pro Controller zusammengeschaltet mit einem Software-Stripe RAID 0. Das garantiert einen sehr hohen Datendurchsatz beim Schreiben und Lesen, da die Rechenarbeit auf zwei XOR-Units verteilt wird. Ein RAID-50-Verbund wird bei Datenbanken verwendet, bei denen Schreibdurchsatz und Redundanz im Vordergrund stehen. More information... , 60 i 60 Ein RAID-60-Verbund besteht aus einem RAID-0-Array, das mehrere RAID 6 kombiniert. Hierzu sind mindestens zwei Controller mit je vier Festplatten, also gesamt acht Festplatten, notwendig. Prinzipiell skalieren sich die Unterschiede von RAID 5 und RAID 6 hoch auf die Unterschiede zwischen RAID 50 und RAID 60: Der Durchsatz ist geringer, während die Datensicherheit höher ist. Der gleichzeitige Ausfall von zwei beliebigen Laufwerken ist jederzeit ohne Datenverlust möglich; weitere Ausfälle sind nur dann unkritisch, wenn maximal zwei Platten je gestriptem RAID 6 betroffen sind. More information... , 10ADM , 1ADM
S-ATA III i S-ATA III Serial ATA (SATA) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA 3 can transfer up to 6 Gbit/s. More information...	16 x
Mass storage controller type	SAS , SATA-600
Data storage controller	HP Smart Array P816i-a
Flash-based write cache (FBWC)	4 GB

Hard drives
Number of hard disks max i Number of hard disks max Maximum number of hard disks	12
Form factor	3.5"
hot plugging i hot plugging Hot plugging describes the addition of components that would expand the system without significant interruption to the operation of the system. More information...	Yes

Expansion slots i Expansion slots The expansion card (also expansion board, adapter card or accessory card) in computing is a printed circuit board that can be inserted into an electrical connector, or expansion slot on a computer motherboard, backplane or riser card to add functionality to a computer system via the expansion bus. More information...
PCI express version (max.) i PCI express version (max.) PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a computer expansion card standard designed to replace the older PCI, PCI-X, and AGP bus standards. PCIe has numerous improvements over the aforementioned bus standards, including higher maximum system bus throughput, lower I/O pin count and smaller physical footprint, better performance-scaling for bus devices, a more detailed error detection and reporting mechanism, and native hot-plug functionality. More recent revisions of the PCIe standard support hardware I/O virtualization. More information...	3
PCI Express 3.0 x16 i PCI Express 3.0 x16 PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a high-speed serial computer expansion bus standard designed to replace the older PCI, PCI-X, and AGP bus standards. More information...	1 x
PCI Express x8 i PCI Express x8 PCI Express, officially abbreviated as PCI-E or PCIe, is a computer expansion card interface format introduced by Intel in 2004. PCI Express was designed to replace the general-purpose PCI expansion bus, the high-end PCI-X bus and the AGP graphics card interface. Unlike previous PC expansion interfaces, rather than being a bus it is structured around point-to-point serial links called lanes. More information...	2 x

Available expansion slots
PCI express version (max.) i PCI express version (max.) PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a computer expansion card standard designed to replace the older PCI, PCI-X, and AGP bus standards. PCIe has numerous improvements over the aforementioned bus standards, including higher maximum system bus throughput, lower I/O pin count and smaller physical footprint, better performance-scaling for bus devices, a more detailed error detection and reporting mechanism, and native hot-plug functionality. More recent revisions of the PCIe standard support hardware I/O virtualization. More information...	3
PCI Express 3.0 x16 i PCI Express 3.0 x16 PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a high-speed serial computer expansion bus standard designed to replace the older PCI, PCI-X, and AGP bus standards. More information...	1 x
PCI Express x8 i PCI Express x8 PCI Express, officially abbreviated as PCI-E or PCIe, is a computer expansion card interface format introduced by Intel in 2004. PCI Express was designed to replace the general-purpose PCI expansion bus, the high-end PCI-X bus and the AGP graphics card interface. Unlike previous PC expansion interfaces, rather than being a bus it is structured around point-to-point serial links called lanes. More information...	2 x

External interfaces i External interfaces Describes which interfaces the device has that are accessible from outside (the device does not need to be opened).
USB 3.0 type A i USB 3.0 type A The universal serial bus (USB) is a serial bus system for the connection of a computer to external devices. USB3.0 can reach up to 5 Gbit/s in Superspeed modus. More information...	3 x
USB 2.0 type A i USB 2.0 type A Universal Serial Bus (USB) is a serial bus standard to interface devices. USB was designed to allow many peripherals to be connected using a single standardized interface socket and to improve the plug-and-play capabilities by allowing devices to be connected and disconnected without rebooting the computer (hot swapping). Other convenient features include providing power to low-consumption devices without the need for an external power supply and allowing many devices to be used without requiring manufacturer specific, individual device drivers to be installed. The Mini-B, Micro-A, Micro-B , and Micro-AB connectors are used for smaller devices such as PDAs, mobile phones or digital cameras. The Standard-A plug is approximately 4 by 12 mm, the Standard-B approximately 7 by 8 mm, and the Micro-A and Micro-B plugs approximately 2 by 7 mm. More information...	1 x

Internal interfaces
USB 3.0 type A i USB 3.0 type A The universal serial bus (USB) is a serial bus system for the connection of a computer to external devices. USB3.0 can reach up to 5 Gbit/s in Superspeed modus. More information...	2 x
Trusted Platform Module (TPM) i Trusted Platform Module (TPM) The Trusted Platform Module offers facilities for the secure generation of cryptographic keys, and limitation of their use, in addition to a hardware pseudo-random number generator. It also includes capabilities such as remote attestation and sealed storage. More information...	Yes

Network
Ethernet i Ethernet Ethernet play is a family of computer networking technologies for local area networks (LANs) commercially introduced in 1980. Standardized in IEEE 802.3, Ethernet has largely replaced competing wired LAN technologies. Systems communicating over Ethernet divide a stream of data into individual packets called frames. Each frame contains source and destination addresses and error-checking data so that damaged data can be detected and re-transmitted. The standards define several wiring and signaling variants. The original 10BASE5 Ethernet used coaxial cable as a shared medium. Later the coaxial cables were replaced by twisted pair and fiber optic links in conjunction with hubs or switches. Data rates were periodically increased from the original 10 megabits per second, to 100 gigabits per second. More information...	4 x
RJ45/LAN port i RJ45/LAN port Network connection allows connection to an internal or external network. More information...	1 x
Max. port speed i Max. port speed Describes the maximum data transfer rate. Is not necessarily supported by all ports. More information...	1000 Mbit/s i 1000 Mbit/s In computer networking, Gigabit Ethernet (GbE or 1 GigE) is a term describing various technologies for transmitting Ethernet frames at a rate of a gigabit per second (1,000,000,000 bits per second). More information...

Video connections i Video connections Describes the video connections of the device.
VGA i VGA A VGA connector as it is commonly known (other names include RGB connector, D-sub 15, mini sub D15 and mini D15) is a three-row 15 pin DE-15. There are four versions: original and DDC2 pinouts, the far older and less flexible DE-9 connector, and a Mini-VGA used for laptops. The common 15-pin VGA connector found on most video cards, computer monitors, and other devices, is almost universally called "HD-15". HD stands for "high-density", which distinguishes it from connectors having the same form factor but only 2 rows of pins. However, this connector is often incorrectly referred to as a DB-15 or HDB-15.[citation needed] "VGA connectors" and their associated cabling are almost always used solely to carry analog component RGBHV (red - green - blue - horizontal sync - vertical sync) video signals along with DDC2 digital clock and data. Where size is a constraint (such as laptops) a mini-VGA port can sometimes be found in place of the full-sized VGA connector.	1 x
DisplayPort i DisplayPort DisplayPort is a digital display interface standard (approved May 2006, current version 1.1a approved on January 11, 2008) put forth by the Video Electronics Standards Association (VESA). It defines a new license-free, royalty-free, digital audio/video interconnect, intended to be used primarily between a computer and its display monitor, or a computer and a home-theater system. More information...	1 x

Optical drive properties
Optical drive type i Optical drive type Describes the type of optical drive. An optical drive is a device for accessing optical data carriers. More information...	No drive

Operating system i Operating system An operating system is the software component of a computer system that is responsible for the management and coordination of activities and the sharing of the resources of the computer. The operating system (OS) acts as a host for application programs that are run on the machine.
Operating system i Operating system An operating system (OS) is a collection of software that manages computer hardware resources and provides common services for computer programs. The operating system is a vital component of the system software in a computer system. Application programs require an operating system to function. More information...	No operating system

Mains supply properties i Mains supply properties Generally mains supply means the product is supplied with energy over the grid.
Number of power supply units	2 x
Power	1600 W
Input voltage i Input voltage Voltage (sometimes also called electric or electrical tension) is the difference of electrical potential between two points of an electrical or electronic circuit, expressed in volts. More information...	120 - 230 V
Redundant power supply i Redundant power supply Redundant power supplies are used on servers and important computers to increase reliability. Two or three power supply plug-in units are mounted in a common power supply cage.	Yes
Max. Number of power supply units	2

Product dimensions i Product dimensions Physical size of an object
Length	730.20 mm
Width	445.50 mm
Height	87.30 mm
Weight	14.90 kg

Properties
Safety i Safety Security related properties	Trusted Platform Module (TPM) i Trusted Platform Module (TPM) The Trusted Platform Module offers facilities for the secure generation of cryptographic keys, and limitation of their use, in addition to a hardware pseudo-random number generator. It also includes capabilities such as remote attestation and sealed storage. More information...

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Downloads

Returns and warranty

Dead on arrival (DOA) 30 Days Bring-in

Warranty 24 month Bring-in

30-day right of return

i

Services

Supply and initial operation of server

Delivery to place of use and setup of a tower server

Delivery to place of use and installation of a rack server

Take-back and disposal of your server

Availability

HPE ProLiant DL380 Gen10 (Intel Xeon Silver 4110, 32GB, 3.5")

Availability

Mail delivery

Collection

Share product on:

HPE ProLiant DL380 Gen10 (Intel Xeon Silver 4110, 32GB, 3.5")

Model

HPE ProLiant DL380 Gen10 (Intel Xeon Bronze 3106, 16GB, 2.5")

Availability

Mail delivery

Collection

HPE ProLiant DL380 Gen10 (Intel Xeon Bronze 3106, 16GB, 3.5")

Availability

HPE ProLiant DL380 Gen10 (Intel Xeon Gold 5118, 64GB, 2.5")

Availability

HPE ProLiant DL380 Gen10 (Intel Xeon Gold 6130, 64GB, 2.5")

Availability

Mail delivery

Collection

HPE ProLiant DL380 Gen10 (Intel Xeon Silver 4110, 16GB, 2.5")

Availability

Mail delivery

Collection

HPE ProLiant DL380 Gen10 (Intel Xeon Silver 4114, 32GB, 2.5")

Availability

Mail delivery

Collection

Description

Specifications

General information

Hardware form factor

Hardware form factor

Processor

Processor

Processor type

Number of processors

Processor clock frequency

Number of threads

Number of processor cores

8

Max. turbo clock rate

Max. TDP

L3 Cache

Processor family

Motherboard properties

CPU socket

Chipset

Memory

Memory

Memory type

Storage capacity 1 (RAM)

RAM total

Max. RAM

Data storage controller

Data storage controller

RAID configuration

0

1

5

6

10

50

60

0

1

5

6

10

50

60

S-ATA III

Hard drives

Number of hard disks max

hot plugging

Expansion slots

Expansion slots

PCI express version (max.)

PCI Express 3.0 x16

PCI Express x8

Available expansion slots