Filament PA Nylon PA6 Neat white 0.5kg 1.75mm

Spectrum Nylon PA6 Neat White-Natural 1.75 mm 0.5 kg - Low Warp High-Temperature Polyamide. A key feature of PA6 Neat is its increased mechanical strength compared to other plastics. The material also boasts exceptional thermal properties, chemical resistance, and a relatively high resistance to corrosion stimulators. Polyamide PA6 Neat is one of the few materials with a low processing shrinkage of approximately 0.3%.

Main Features:

• Exceptionally low processing shrinkage of 0.3%
• A very wide temperature range for long-term operation as well as a very high temperature up to 160 °C for short-term operation
• Good tribological properties, including dry friction conditions as found in sliding bearings
• Chemical resistance against lubricants and oils
• Unusually good adhesion on 3D printer build platforms compared to other nylon-based filaments on the market

Applications:

• Manufacturing of gears and racks, sliding bearings, scraper gears, and pulleys that operate at elevated temperatures for extended periods up to 120 °C and for short periods up to 160 °C
• All types of ring and plate seals with enhanced chemical and corrosion resistance
• End-use parts
• Tools
• Functional prototyping
• Industrial modeling

Packaging: Filament wound on a transparent PC spool. The spool contains information about the material type, diameter, and recommended printing temperature. Each roll is packaged in an aluminum vacuum bag with a zipper and silica gel.

Technical Data Sheet:
General Information:

• Color: natural
• Diameter: 1.75 mm
• Dimensional tolerance: ± 0.05 mm
• Printing temperature: 240-270 °C
• Heated bed: required
• Hot pad temperature: 80-100 °C
• Net weight: 500 g
• Total weight: 800 g
• Spool dimensions: Outer diameter – 20 cm, Inner diameter - 5.2 cm, Width 5.2 cm.