Efest Akku IMR 14430 (Pluspol flach)

A rechargeable cell 14430 4/5AA Li-Ion 3.6 to 3.7 volts (maximum charging voltage 4.2 V) with low self-discharge and low internal resistance. Perfectly suited for model building, LEDs, etc. Efest IMR 14430 unprotected (flat top).

Capacity (mAh): 600 mAh
Nominal voltage (Volts): 3.6 V - 3.7 V
End-of-charge voltage (Volts): 4.2 V ± 0.05 V
End-of-discharge voltage (Volts): 2.50 V
Discharge current constant/pulse: 5C 3 A/6 A
Charge current (Amperes): 0.xx - 0.5 A
Positive terminal (design): flat (Flat Top)
Protection circuit BMS: not present
Composition (chemistry): LiMn (IMR)
Diameter (mm): 14.14 mm ± 0.10 mm
Height (mm): 42.63 mm ± 0.2 mm
Weight (g): 20 g ± 1 g
Charging method: CC-CV

Safety notes: Lithium cells should only be operated with protective electronics (deep discharge, short circuit, and overcharge protection). Please note that lithium cells may only be used by qualified personnel. Improper handling or short circuits can lead to fire or explosion.

Additional features: Lithium-ion batteries are thermally stable and do not suffer from memory effect. They operate on the basis of lithium and are characterized by a high energy density.

Technical data for "Efest IMR 14430 600 mAh 3.6 V - 3.7 V Li-Ion battery (flat top)":

Notes: Charging lithium-ion batteries requires a special charger that charges the batteries according to a specific charging method (CCCV = constant current, constant voltage). The batteries must not be charged above a voltage of 4.25 volts, as this poses a risk of fire and explosion. It is advantageous to charge the batteries only up to about 4.1 volts, as this significantly increases their lifespan and number of charge cycles. Only lithium-ion chargers should be used for charging. However, inexpensive chargers may have the disadvantage of not shutting off safely after the charging process is complete.