Basf TPS90A Natural 1.75 mm 750 g

BASF Ultrafuse TPS 90A natural 1.75mm 750g Ultrafuse TPS 90A has been specifically developed for Fused Filament Fabrication and offers an exceptionally soft surface. Ultrafuse TPS 90A provides a non-slip, soft grip, giving it a unique tactile feel during Fused Filament Fabrication. The properties of this material are complemented by low moisture absorption and impressive layer adhesion, which creates a particularly smooth surface, making it the perfect choice for device grips and seals in small series production. Ultrafuse TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible components results in a highly versatile material. Compared to other flexible 3D printing materials, it exhibits a rubber-like soft-touch feel and better slip resistance. Additionally, the material has reduced moisture absorption, allowing for printing without pre-drying. Parts printed with Ultrafuse TPS 90A show almost no visible layers or warping, making it an excellent material choice for end-use parts. Material properties: Shore A hardness: 89, abrasion resistance: 111 mm3, compression set at 23°C, 72h: 75%, tensile strength: 7 MPa (XY), 2 MPa (ZX), elongation at break: 280% (XY), 9% (ZX), tear strength: 10 kN/m (XY), 5 kN/m (XZ), 4 kN/m (ZX). Printing guidelines: nozzle temperature: 260–280 °C, bed temperature: 70°C - 90°C, bed material: PEI, PI or adhesive, nozzle diameter: 0.4 mm, printing speed: 10-30 mm/s.