Autarking Battery cable set

Cable set - 2x 10mm² with M8 cable lugs - 1.5m. Flexible, fine-core DC cable for connecting DC high-current consumers such as inverters, inverters, MultiPlus combi devices, anchor winches etc. as well as for connecting DC high-current chargers, solar charge controllers or charge boosters. These cables are pre-assembled to length and have crimped-on cable lugs with M8 mounting holes at the ends. The cable lugs are fitted with shrink tubing. The flexibility is similar to the SGF cable, although the insulation material is different. When connecting, ensure good contact between the cable lugs and the contact surface. Do not use washers or nuts between the contact surfaces. Please refer to the tip "Correct cable lug connection". Specifications: Cable cross-section: 10mm² battery cable. Standard: GB/T 5023.5-2008. Structure of the conductor: Copper wires: 198 pieces. Copper wire outer diameter: 0.25±0.002mm. Conductor type: OFC (oxygen pure copper). Conductor resistance 20°C (MΩ/km): ≤0.0056. Insulation: Insulation material: Rubber and plastic 105℃. Rated voltage: 450/750V. Insulation outer diameter: 6.6±0.1mm. Average diameter: 1.2mm. Minimum thickness: ≥0.8mm. Flame retardant standard: FT-1. Anti-UV: Yes. Working temperature range: -40°C to +105°C. Colour: red & black. Appearance: No impurities, no scratches, smooth, round. Environmental testing: ROHS (no Pb, Cd, Hg, Cr+6, PBBs, PBDEs). Voltage test of finished product: Soak in water for 1 hour at room temperature, apply 1.5kV voltage for 5 minutes, no breakdown. Spark test: 6kV.