You're not connected to the Internet.

Description

A Feather board without ambition is a Feather board without
FeatherWings!

This is the Non-Latching Mini Relay FeatherWing.

It gives you power to control, and control over power. Put simply, you
can now turn on and off lamps, fans, solenoids, and other small
appliances that run on up to 250VAC or DC power using any Feather
board.

Using our Feather Stacking Headers or Feather Female Headers you can
connect a FeatherWing on top of your Feather board and let the board
take flight.

The are two 'flavors' of these FeatherWings, this is the simple
Non-Latching relay. This Wing has a single Set pin. Normally, the
relay's COM pin is connected mechanically to the NC pin and the NO pin
is disconnected.

When the SET pin is pulled high, the relay switches and the internal
switch changes so that the COM pin is mechanically connected to the NO
pin and NC is then disconnected

When the relay is active, a red LED is lit, and about 50mA of current
is used to keep the coil switched on. Note, if power is lost, the
relay will go back 'open'.

Now, you might be thinking "wow I really don't want to waste 50mA of
current, that will really sink my battery life!". OK good news, we
have another type of FeatherWing, the Latching FeatherWing. You need
two pins but save power. Note, if power is lost, the relay will stay
in the last setting.

Both FeatherWings use the same family of relay. You can switch up to
2A of resistive current at 30VDC or ~40VAC or lower. At 110VDC you can
switch up to 0.3A, at 120VAC up to 0.5A, and at 250VAC you can switch
up to 0.6A. Check the datasheet for the relay for the exact switching
capacity, and of course, for reactive/inductive loads you will need to
derate. This isn't a relay you can use to turn on and off your
washer/dryer, stick to 60W or less.

Each FeatherWing comes with a fully assembled and tested PCB, header
you can use to attach to your feather. You also get a 3-pin terminal
block you can use to wire up whatever you are going to be
relay-controlling. Some light soldering is required.

Please note: If using with high voltages (> 24V) use care and common
sense! High voltages require experience, and are only for use by
engineers who are comfortable with guidelines and know how to use
safely!

* 50.8mm x 22.9mm x 11.4mm / 2" x 0.9" x 0.45"
* Weight (just the board): 5.3g … more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Adafruit
Product type Elektronikmodul
Item number5998561
Manufacturer no.ada-2895

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: digitec@digitec.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery/Collection

 Currently unavailable. Delivery date unknown.
We do not have any information regarding the delivery date. It will be shown as soon as it's known.

Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the digitec community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the digitec community.

(0)
Rate product
Adafruit Adafruit Non-Latching Mini Relay FeatherWing Adafruit Adafruit Non-Latching Mini Relay FeatherWing