A123 Systems Akku ANR26650M1B, mit Lötfahnen Z-Form

A123 ANR26650M1B LiFePo4 with Z-shaped solder tabs. High-quality cells with a long lifespan and high cycle stability. Lifespan is 10 times longer than Li-Ion batteries with approximately 1000 charge cycles.

Dimensions of solder tabs: 10 mm x 25 mm
Manufacturer's capacity: 2500 mAh
Nominal voltage (Volts): 3.3 V
Charge termination voltage (Volts): 3.6 V
Max. discharge current (Amperes): 120 A
Continuous discharge: 70 A
Discharge termination voltage (Volts): 2.0 V
Internal resistance: 8 mOhm
Charge current (Amperes): 4C/10 A
Charging voltage: 3.6 V
Integrated protection: none
Positive terminal (design): flat (Flat Top)
Composition (chemistry): LiFePo
Diameter (mm): 26.25 mm ± 0.15 mm
Height (mm): 65.00 mm ± 0.15 mm
Weight (g): 70 g
Charging method: CC-CV

Safety notes: Lithium cells should only be operated with protective electronics! Please note that lithium cells may only be used by authorized personnel. Improper handling or short circuits can lead to fire or explosion.

Additional features: Lithium-ion batteries are thermally stable and do not suffer from memory effect. They operate on the basis of lithium and are characterized by a high energy density.

Technical specifications for "A123 ANR26650M1B 2500 mAh 3.3 V LiFePo4 battery + Z solder tabs":

Notes: Charging lithium iron phosphate batteries requires a special charger that charges the batteries according to a specific charging method (CCCV = constant current, constant voltage). The batteries must not be charged beyond a voltage of 3.6 Volts, as this poses a risk of fire and explosion. It is advantageous to charge the batteries only up to approximately 3.5 Volts, as this significantly increases the lifespan and number of charge cycles (potentially doubling it). Only lithium chargers should be used for charging.