3D Xtech PTG2030750BK0 3DXSTAT Conductive ESD Filament PETG 2.85 mm 750 g Weak

ESD PETG is an advanced ESD-safe material designed for use in critical applications that require protection against electrostatic discharge (ESD). It is manufactured using state-of-the-art multi-walled carbon nanotube technology, cutting-edge compounding technology, and precise extrusion processes.

Chemical Resistance: Untensioned PETG rods exhibit good resistance to diluted aqueous solutions of mineral acids, bases, salts, and soaps, as well as to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short-chain ketones, and aromatic hydrocarbons can dissolve or swell the plastic.

Typical applications include:

• Semi-con: Hard disk components, wafer handling, fixtures, housings, and connectors
• Industrial: Conveying, measuring, and capturing applications

Target conductivity for 3DXSTAT ESD PETG: 10^7 to 10^9 Ohm surface resistance on a 3DP sample using a concentric ring test method.

Note: Internal studies have shown that increased extruder temperatures can achieve higher conductivity. Similarly, lower extruder temperatures have resulted in lower conductivities. Each printer is set up differently and has a different part geometry. Therefore, expect some testing time to understand how this filament performs in your specific printer or application. However, do not exceed 270 °C to minimise the risk of polymer degradation.

Surface conductivity depending on extruder temperature: The surface resistance of the printed ESD-safe part depends on the printer's extruder temperature. For example, if your tests indicate that the part is too insulating, increasing the extruder temperature will improve conductivity.