3d-printerstore.ch PROFILL Filament PVA HT Filament 0.5kg 2.85mm

PVA HT ProFill™ Filament 2.85mm water soluble 0.5kg for ABS, PETG,TPU PVA-HT (High Temperature Printing) is our new water soluble filament for printing support structures on styrene based materials such as ABS PVA-HT has excellent adhesion to ABS, ABS-S, ASA, PETG and TPU. PVA-HT dissolves slightly slower than normal PVA and it is recommended to dissolve it in lukewarm water, preferably circulating water. PVA-HT can be used with higher nozzle temperatures ( 250°C good adhesion to styrene-based plastics such as ABS, ASA, PETG and TPU good solubility lukewarm water ideal in environments with heated installation space up to approx. 60°C no clogging of the more of the nozzle Pressure temperature 235-255°C Heating bed temperature Recommended heating bed temperature approx. 35 - 60°C Warp effect very low Coil size Coil diameter: 200mm Coil height: 53mm Hub hole diameter : 53mm Storage Cool and dry (15-25˚C) and away from UV light. This will greatly improve the shelf life. Each desktop 3D printer has its own unique characteristics. Therefore, you may need to play a little with the temperature settings to get the best results. To get the best results for your prints, you will need to consider variables such as nozzle diameter of your 3D printer, your print speed settings and layer height. Technical data PVA HT ProFill™ Thermal properties Description Testmethod Typical value printing temp. 235-255˚C Physical properties Description Testmethod Typical value Specific gravity ASTM D1505 1.19 g/cc MFR 190˚C / 21.6 kg 58 g/10 min Dimensions Size Ø tolerance Roundness 1.75mm ± 0.05mm ≥ 95% 2.85mm ± 0.10mm ≥ 95%.