3d-printerstore.ch Pei Sheet 220x220

PEI Ultem Permanent Printing Film 220x220mm 0.4mm with 3M 468MP Adhesive Tape PEI (polyetherimide), also called Ultem, provides a 3D printing surface that does not require Bluetape, ABS slury or any other adhesive. ABS and PLA both adhere very well to the surface, eliminating the need for raft for better adhesion. The 3D printed parts adhere to the PEI surface on a heated bed. Let it cool and the parts release on their own. PEI Sheet properties great for printing with ABS and PLA (and many other materials) directly to the print surface without additional adhesives. The 0.4mm film can be quickly applied to your existing printing plate using 3M Adhesive Transfer Tape. Laminate your sheet of PEI to your existing printing plate using 3M 468MP Adhesive Transfer Tape. Please note that 3M 468MP is a very strong adhesive material that should be applied very carefully so there are no air pockets. Once you have taped your PEI film to your print bed, re-level the print bed and s. PLA does not need heat, but a heated one of 45°C will help. After the print is done, just let the plate cool and the model will come off the plate with a gentle "pop". Before each print, wipe your PEI surface with 70-91% isopropyl alcohol to ensure that any grease or other residue that has accumulated on the surface is removed. This will help to greatly increase your surface adhesion. Use isopropyl alcohol, methyl alcohol or soap to clean your PEI after use. In other words, PEI can be cleaned by using isopropyl alcohol, which in theory will help with adhesion if you lose it.