CHF121.–
Focusrite Scarlett 2i2 3rd gene
USB
Question about Focusrite Scarlett 2i2 3rd gene
Hello I have another question, or rather a problem. I got the interface today, connected to the pc with the NT1A and the Beyerdynamic 770 Pro and I have only a noise and only on the right sound. the PC sound and the monitoring can not be heard so. What can I do so that the microphone and PC sound on both earpieces do not arrive so distorted and noisy? Thank you
So:
1. You must switch your direct monitoring to mono (one circle). Otherwise you will only hear yourself on one side. With the stereo setting (two circuits) you have channel 1 on the left side and channel 2 on the right.
Have you switched on phantom power for your microphone? 3.
3. have you adjusted the input gain for your microphone channel well? The preamp is noisy, for example, if you have it too wide open.
Let us know if this has helped. Otherwise we will see.
Hello
Silly question, but: Have you connected your headphones to the correct output? Correct would be via the jack socket on the front of the interface, to the right of the large rotary control (where the headphone symbol is).
Is the problem only on the monitoring side, i.e. is the microphone signal correctly recorded during the recording - or is the same problem there?
Software installed?