Question about Hama DIT2100MSBT HiFi Hybrid Tuner

I once had this with a radio alarm clock: in the evening I hung a piece of a coloured pencil case over it (fold it down) - that helped a lot... simple Hardware Workround

As far as I know, the display only goes to "Dark" in operation, which is still very bright in the dark. 🤨 You can only switch it off in standby.

From the operating instructions:

17.9 Backlight
Brightness sensor activated
- Move the slide switch (27) to the ON position.
- The brightness of the display is now automatically adjusted to the ambient brightness.
automatically to the ambient brightness.

Brightness sensor deactivated
- Slide the slide switch (27) to the OFF position.
You have the option of deactivating the backlighting
for the individual operating modes (operating mode,
standby mode, snooze mode) separately.


System settings

Backlighting
- For the operating modes operating mode and snooze
mode, you can select from various brightness levels.
levels.
- For standby mode, also select a brightness level for the backlight in the
brightness level for the backlighting in standby
standby (display illumination). Alternatively, you can
switch off the backlighting in standby mode
(Display Illumination Off).
- Select a time interval under Timeout (sec).
time interval. If the radio is in standby, press [navigation] to turn off the display.
[navigation] to adjust the display brightness for the selected time interval.
selected time interval at the brightness level of the operating mode.
operating mode for the period of the selected time interval.
- Alternatively, deactivate this function (Timeout
(sec) Off).

Alternatively, press [ ] on the remote control to directly switch the
change the backlighting in the current operating mode directly.
change.

I turn off the power, it's on the amp, then I turn that off and all the devices are gone
Saves power and is dark 👍👍👍