Best selling Ultrasonic cleaners
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Grundig Uc 6620
The Grundig UC 6620 ultrasonic cleaner removes even the most stubborn dirt, including in hard-to-reach areas. It offers highly efficient, gentle cleaning with ultrasound, without damaging surfaces, using a double wave principle. With the UC 6620, you can thoroughly and gently clean razor heads, hair clipper attachments, toothbrushes, jewelry, glasses, and much more. The UC 6620 features a 500 ml stainless steel water tank and an integrated timer for 90, 180, 280, 380, and 480 seconds of operation.
2. Bio-chem Ultrasonic cleaner
Are you usually only using dish soap for cleaning with your ultrasonic device and are only somewhat satisfied with the results, if at all? If you want to get your jewelry or glasses sparkling clean again, the bio-chem ultrasonic cleaner is definitely the right choice for you. The cleaning solution is very economical and has a particularly gentle formula to protect your favorite pieces—completely free of unpleasant chemical odors.
It ensures effective cleaning, even in hard-to-reach corners. Dust, grease, dirt, skin particles, sebum, and sweat residues tend to accumulate in the tightest, barely accessible spots. Conventional cleaners or dish soap won't clean these areas satisfactorily. The bio-chem ultrasonic cleaner guarantees thorough cleanliness. Depending on the opacity of the water used for cleaning, you will be amazed at how much dirt is hidden in your jewelry.
The biological cleaning agent is very efficient and particularly sustainable, as you only need a very small amount for an "ultrasonic bath" with excellent results. With the practical dosing aid, you can always be absolutely sure to use the right amount of cleaning solution for your ultrasonic device. Look forward to a significantly more pleasant wearing experience with your glasses and jewelry.
It is suitable for all ultrasonic cleaning devices and baths from all manufacturers in various sizes. The cleaner is vegan and consists of biologically easily degradable ingredients. It contains no aggressive substances, no alcohol, and no fragrances or colorants. Thanks to its mild formula, it is suitable for all materials, making it particularly ideal for high-quality jewelry or glasses. The concentrated solution can be diluted significantly and used multiple times depending on the level of soiling, helping you reduce unnecessary plastic waste. It removes dirt, grease, fingerprints, makeup, sweat, dust, and oil.
3. Grundig Uc 5620
What appears clean may not necessarily be hygienic. The Grundig ultrasonic cleaner always ensures clear results. It cleans particularly intensively and gently, not only razor heads and hair clippers but also toothbrushes, dentures, glasses, cutlery, and much more.
Features:
- Highly efficient, gentle cleaning with ultrasound, without damaging surfaces, using a dual wave principle.
- Cleans razor heads, cutting sets of hair clippers, toothbrushes, dentures, braces, jewelry, waterproof watches, glasses, combs, and more.
- Removes even stubborn dirt, including in hard-to-reach places.
- Power: 50 W.
- Integrated timer for 5 minutes of operation.
- Large stainless steel water tank: 500 ml.
- Includes a removable sieve insert with an integrated watch holder.
- Frequency: 43 kHz.
- Mains operation: 220-240 V~, 50/60 Hz.
- Not suitable for sensitive or porous stones such as emerald, opal, coral, turquoise, lapis lazuli, pearls, or mother-of-pearl, glasses with frames made of natural materials, contact lenses, or objects made of wood, textiles, or leather.
4. BGS Ultrasonic parts cleaner
The BGS ultrasonic parts cleaner is a powerful cleaning device that is ideal for thoroughly cleaning a variety of objects. With an ultrasonic power of 120 watts and a frequency of 40 kHz, it effectively removes dirt, oil, and other contaminants from engine parts, tools, jewelry, watch bands, electrical components, toner cartridges, and coins. The cleaner features a stainless steel tank with a capacity of 3.2 liters, ensuring easy handling and durability. The temperature can be set between 20 and 80 °C, while the cleaning time can be flexibly adjusted from 0 to 20 minutes. This device is therefore a practical solution for anyone looking for a thorough and gentle cleaning of their valuable items.
- Stainless steel housing and tank for durability and easy cleaning
- Flexible temperature setting from 20 to 80 °C
- Time setting from 0 to 20 minutes for individual cleaning needs
- Ultrasonic frequency of 40 kHz for effective dirt removal
- Suitable for a variety of applications, including engine parts and jewelry.
5. BGS Universal cleaner
Used in industrial applications and the automotive sector, this cleaning agent is suitable for spray pumps, high-pressure cleaners, and as a mildly alkaline ultrasonic cleaner. It is ideal for the ultrasonic cleaners BGS 6879, 6880, 6881, 6882, 63080, and the parts washing system BGS 8693. Even at low dosages, this cleaning agent increases the transfer rate and exhibits excellent separation and dirt-carrying capacity. It has outstanding wetting properties and is also suitable for manual cleaning. The mixing ratio ranges from 1:1 to 1:50, with a pH value of 10 to 12.
6. Fysic FC-35 Ultrasonic cleaner
Clean your jewellery and make it shine with the Fysic FC35 ultrasonic cleaner with UV light. This cleaner has UV-C light that ensures that all germs and bacteria are killed. So it removes dirt from any surface and has a 360° all-round cleaning. The cleaner allows you to set different cleaning modes: Ultrasound, UV-C light or double cleaning with ultrasound and UV-C light. Besides the cleaning modes, you can also set the different time modes: 180 sec (3 min), 300 sec (5 min) and 480 sec (8 min). The cleaner is easy to use as you only need to set the cleaning modes and time modes. The Fysic FC35 ultrasonic cleaner has a large capacity of 600 ml and has the following dimensions: 17.5 x 10.5 x 3.5 cm. All Fysic products come with a 24-month warranty. Important features Possibility of double cleaning: Ultrasonic and UV-C light 360° all-round cleaning Large 600 ml capacity, 17.5x10.5x3.5 cm Ultrasonic cleaner, removes dirt from any surface UV-C light kills germs and bacteria Three cleaning modes: ultrasonic, UV-C light, ultrasonic + UV-C light Time modes: 180 s (3 min), 300 s (5 min), 480 s (8 min) Easy to use: Set mode, set time and clean Cleans your jewellery and leaves it shiny and without bacteria Included in delivery FC35 Ultrasonic cleaner Basket Tweezers Multitool Manual NL / EN / DE / FR Features Product type Ultrasonic cleaner Material Plastic,Stainless steel Operating mode Mains operation Colour (according to manufacturer) White-grey Width 20.9 cm Height 11.3 cm Depth 14.0 cm Weight (according to manufacturer) 1.1 kg Weight 1.1 kg Scope of delivery Ultrasonic cleaner, basket, tweezers, multitool, manual NL / EN / DE / FR Country of origin/Place of origin China Colour (standardised) Grey.
7. Emag EM-080
The EM-080 universal concentrate from Emag is a highly effective cleaning concentrate specifically designed for use in ultrasonic cleaning devices. With a mixing ratio of 1:100, this concentrate can effectively remove dirt, grease, and deposits from various materials. It comes in a convenient 500 ml plastic bottle that allows for easy handling and dosing. The product is manufactured in Germany and provides a reliable solution for cleaning delicate items such as jewelry, glasses, and technical components. The application of the EM-080 cleaning concentrate ensures a thorough and gentle cleaning process that extends the lifespan of the cleaned objects.
- Highly effective cleaning concentrate for ultrasonic devices
- Effective removal of dirt and deposits
- Convenient 500 ml plastic bottle for easy dosing.
8. Granbo Sonic GA008
The ultrasonic cleaners offer an efficient way to perfectly clean your resin prints without alcohol, helping to preserve and protect the quality of your model. Highlights 0.8 litre capacityDigital timer 1-30 min60 W ultrasonic power With a capacity of 800 ml, this cleaner is capable of effectively cleaning 3D printed components. You can adjust the level of cleaning to suit the needs of your resin print. The larger the 3D resin print, the more time you can invest in the cleaning cycle. The ultrasonic cleaning machine has a corresponding water level line, it is recommended to place the 3D printed items to be cleaned first and then add water and detergent so that you can better observe whether the water reaches exactly the right level. AccessoriesThis is a customer-friendly product that comes with the following accessories: a cover, a cleaning basket, a power cord, a warranty certificate, a training manual. No need for alcoholThis cleaner does not need alcohol, which helps to preserve and protect the quality of the component.
9. Sanitas Sur42
The vibrations triggered by ultrasonic waves remove dust, smears and dirt from the surface. Gentle and thorough cleaning of gold, silver and metal jewellery, glasses (not suitable for glasses with coating.); waterproof watches, razor heads and blades, dentures and braces, dentures, cutlery, CDs and DVDs, stationery, nibs, cogwheels, coins and other metal objects with a hard surface. Digital timer indicates running time 5 different running times can be selected.
Unsuitable for glasses with coating.
10. Casativo Ultrasonic cleaner concentrate
Casativo ultrasonic cleaner concentrate, vegan, sustainable and label-free, 1l (1000 ml)
Product order
See all products