Best selling Soldering irons

This page always stays fresh and updates automatically.

1. Velleman Adjustable soldering station

For general electronics applications and repairs. Features an on/off switch with LED indicator. The standard tip width is 1.2 mm.

What our customers think

Pro

  • Works after some time
  • Compact and affordable
  • Temperature adjustable

Contra

  • Temperature is definitely not right. At 450 degrees, hardly anything happens at the top.
  • Long warm-up time
  • Does not get hot enough for clean working.

2. Yihua 862BD+

You now receive three professionally integrated stations in a compact package. With this 2-in-1 station, you can perform soldering, desoldering, and hot air rework applications. The hot air rework station and the soldering station can be used independently or simultaneously. This device is suitable for working on SOIC, CHIP, QFP, PLCC, BGA, SMD components, and more.

The hot air rework station supports a temperature range of 100 to 480 °C, while the soldering station supports a temperature range of 200 to 480 °C for your work. Both the hot air rework and soldering stations are equipped with their individual PID programs to stabilize the set temperature and provide you with consistent results.

This 2-in-1 station also features advanced precision functions such as digital temperature calibration and °C/°F temperature display modes. You can correct the temperature deviations of the soldering tip by simply measuring the actual temperature value and entering it into the calibration interface. The °C/°F display function can help you work with temperature requirements or settings from different regions without needing a calculator each time.

Additionally, this 2-in-1 station is equipped with supporting features such as automatic/manual hot air modes, soldering iron sleep mode, hot air failure protection, and more. The sleep mode and automatic/manual hot air mode can extend the lifespan of consumables, such as heating elements. They also save energy and are environmentally friendly. The hot air failure protection function safeguards you and your station from hazards in the event of hot air failures.
 

What our customers think

Pro

  • Lots of accessories
  • simple in the condition
  • Soldering and hot air

3. Weller Erem WE 1010 Soldering Set 230 V F/G

Simply turn it on and start. Digital 70 W soldering station with 40% more power than comparable stations on the market. The 70 W soldering iron ensures quick heat-up and recovery times. This station has been specifically designed for universities, schools, and educational institutions. It offers many software features of a professional soldering station, is easy to use, and keeps costs low. Of course, it can also be used for many other tasks, such as cable assembly, PCB assembly, and much more.

Features:
- User-friendly soldering iron
- Intuitive navigation
- Easy soldering tip replacement and low operating costs
- EGB safe heat-resistant silicone cable
- Temperature stability and locking protect the soldering tip
- Standby and automatic setback save energy and preserve the soldering tip
- Password protection secures settings
- Tip family ET

Scope of delivery:
1 piece 1-channel power supply WE 1
1 piece soldering iron WEP 70
1 piece safety holder PH 70
1 piece soldering tip ET A

Technical data:
Power: 70 W
Temperature range: 100-450 °C
Dimensions L x W x H: 150 x 125 x 100 mm
Channels: 1
Weight: 2.3 kg.
 

What our customers think

Pro

  • Heats up quickly
  • Weller quality at a favourable price
  • Good workmanship

Contra

  • Display unlit
  • No temperature storage locations
  • Thick connection cable with Schuko/T13 transition plug
Weller Erem WE 1010 Soldering Set 230 V F/G (Soldering set)
Soldering irons
CHF150.–

Weller Erem WE 1010 Soldering Set 230 V F/G

Soldering set

4. Weller Erem WE1010 Limited Black Edition

The Weller WE1010 Limited Black Edition soldering station is a state-of-the-art soldering device designed for precise and reliable soldering work. With a maximum temperature of 450 degrees Celsius, it enables quick adaptation to different soldering requirements. The digital display ensures that the temperature is easy and clear to read, while the on/off switch ensures user-friendly operation. This soldering station is ideal for hobbyists and professionals who value quality and performance. The scope of delivery includes a WEP70 soldering iron, a safety tray with sponge and an ETA soldering tip, which emphasise the versatility and functionality of the device. The Weller WE1010 is not only powerful, but also comes in an elegant black colour, giving it a modern and appealing design. 

What our customers think

Pro

  • Length of cable on soldering rod
  • Chic!
  • Easy to adjust

5. Neo Plastic soldering iron 50W set + 200 clamps

The plastic soldering iron with a rated power of 50 watts is a versatile tool that is ideal for various applications in the field of plastic processing. This set includes not only the soldering iron itself but also 200 clamps that enable a precise and secure connection of plastic parts. The soldering iron is designed to ensure even heat distribution, leading to effective and efficient processing of plastics. It is user-friendly, allowing both experienced users and beginners to benefit from this product. The clamps in the set provide additional support and stability during the soldering process, which enhances the quality of the work. This product is a valuable addition to any workshop or hobby space where plastics are worked with. 

Neo Plastic soldering iron 50W set + 200 clamps (Soldering bit)
Soldering irons
CHF32.90

Neo Plastic soldering iron 50W set + 200 clamps

Soldering bit

6. iFixit Reparaturset Power Series Portable Soldering Station

More power. More repair.

The FixHub portable soldering station offers you the full power of a conventional soldering station - but you can take it with you wherever
you go. Whether in the workshop or on the road, with the FixHub portable soldering station you are always ready for your repair. And without compromising on performance.

No more tangled cables and dependence on power sockets - the 55Wh power station gives you up to 8 hours of continuous soldering, wherever you are.

The FixHub intelligent soldering iron provides you with 100W professional power and ergonomic design, ideal for precise soldering work. The multifunctional power station allows you to set it precisely and gives you full control over your soldering work - anytime, anywhere.

In the spirit of iFixit, the FixHub soldering station has been developed to last as long as possible and be easy to repair. Designed for everyday use, it is robust and easy to take apart and repair thanks to its replaceable components. This soldering station will therefore provide you with many years of good service for your repairs.

Lightning-fast power
Maximum soldering efficiency thanks to a 5-second heat-up time and 100 W power - made possible by the station's two USB-C ports.

Repairing made easy
Designed for easy repairs: With FixHub instructions and spare parts, this portable soldering station will be the only one you'll ever need.

Solder where and when you want
Whether it's on-site electronics repairs, DIY projects or servicing outdoor equipment, the station's 55 Wh battery allows you to solder continuously for over 8 hours.
 

iFixit Reparaturset Power Series Portable Soldering Station (ward)
Soldering irons
−8%
CHF264.– was CHF286.–

iFixit Reparaturset Power Series Portable Soldering Station

ward

7. Fabru Soldering iron

The Fabru analogue soldering iron is the perfect solution for precise melting of threaded inserts (M2 to M8) in plastic materials - and the best thing about it: the matching melting aids are included in the set. This set offers everything you need to get started right away. The soldering iron impresses with its analogue temperature control, which enables even heat distribution and precise work. The melting aids included in the scope of delivery make handling easier and ensure effortless and clean results - ideal for prototyping, repairs or series production. Robust, user-friendly and versatile: With the Fabru soldering iron and the included melting aids, you get a complete package for professional results that you can rely on. Voltage: 230V/50Hz. Power: 60 W. Temperature: 200-450°C. 

8. Velleman Vtssc50n

The precise all-rounder for the laboratory table, industrial or service workplace, and hobbyist electronics. The heating technology with a ceramic heating element in the soldering iron ensures a very accurately maintained soldering tip temperature through rapid regulation. This not only allows for a wide range of applications but also enables quick soldering on sensitive components, making it easier and more component-friendly. 

What our customers think

Pro

  • Temperature adjustable
  • adjustable temperature

Contra

  • No spare tip
  • No spare tip included
  • Perceived temperature fluctuations

9. Basetech Soldering station

Soldering at up to 480 °C Attention technicians and lab technicians: The temperature-controlled, 60-watt soldering station from Basetech is a reliable tool in the laboratory or workshop and holds 10 g of solder wire on a spool. Thanks to the LED display, the current temperature can be read at any time. Soldering is possible with the soldering tip at a freely selectable temperature of 160 to 480 °C. Special feature: incl. solder. 

What our customers think

Pro

  • Quick heating up
  • Sponge and cleaner
Basetech Soldering station (Soldering bit)
Soldering irons
−8%
CHF47.80 was CHF51.90

Basetech Soldering station

Soldering bit

10. iFixit IF145-495-1

The FixHub Power Series intelligent soldering iron is the portable soldering iron for your precise soldering work. With USB-C power supply and 100W of power, this soldering iron heats up in less than 5 seconds and gives you the full power of a traditional soldering iron in a compact, handy design. It's ready to use whenever you are. The intelligent soldering iron has been developed to be very suitable for both professionals and beginners. Practical safety features make your work easier: The soldering iron switches off automatically when it is put down and heats up again in seconds as soon as you pick it up again - so you can work efficiently and safely. The illuminated ring clearly shows you whether the soldering iron is heating up, hot or cooling down. In the spirit of iFixit, the FixHub devices have been developed to last as long as possible and be easy to repair. The intelligent soldering iron has been designed for everyday use and is therefore robust, easy to take apart and easy to repair thanks to its replaceable components. This soldering iron will be a loyal companion for your repair projects for a long time to come. Performance at its best - via USB-C. Connect your soldering iron to any USB-C power source and solder without end. With the optional 100 W FixHub power station, you benefit from lightning-fast heat-up times. Innovative safety features. Solder with complete peace of mind thanks to the integrated fall protection, heat-resistant cap and non-slip shape with LED ring temperature indicator. Adjust the temperature. No FixHub power station? No problem. Simply connect your smart soldering iron to your computer and adjust the settings online via the user-friendly FixHub web console. 

Product order
See all products