Best selling Robotics module

Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.

1. CYS S0009

Micro-Servo (Analog) with a maximum torque of 1.5kg/cm. Speed (no load): 0.1sec/60deg at 4.8V, 0.08sec/60deg at 6V. Torque (locked): 1.2kg/cm at 4.8V, 1.5kg/cm at 6V. Operating voltage: 4.8V - 6V 

2. Purecrea 56x56x76mm Stepper Motor Nema 23 v 4.2A 1.8Nm

This powerful stepper motor is perfect for 3D printers, CNC machines or simply for mechanical Arduino projects. If you want to operate the stepper motor with the Arduino, we recommend buying a TB6600 or HY-DIV268N-5A driver.

Recommended accessories:
Purecrea TB6600 compatible stepper motor driver 4A
Purecrea HY-DIV268N stepper motor driver 5A

Technical Details:
Model: 57H1876-420-8-21B
Shaft length: 20mm
Shaft diameter: 8mm
Step angle: 1.8
Current consumption: 4.2A / phase
Maximum torque: 1.8 Nm
Connection cable length: 50cm
Size: 42 x 42 x 60mm
Weight: 1063g

Scope of delivery:
1x 56x56x76mm stepper motor Nema 23 57H1876 4.2A 1.8Nm.
 

Purecrea 56x56x76mm Stepper Motor Nema 23 v 4.2A 1.8Nm (Motor)
Robotics module
CHF67.90

Purecrea 56x56x76mm Stepper Motor Nema 23 v 4.2A 1.8Nm

Motor

3. MakerBeam M3 serrated head bolts

1 bag of approximately 250 M3 bolts with serrated head bottom, 6mm

MakerBeam M3 serrated head bolts (Various, Makerbeam Projects, Construction kit)
Robotics module
CHF25.90

MakerBeam M3 serrated head bolts

Various, Makerbeam Projects, Construction kit

4. SparkFun Motor Driver - Dual TB6612FNG (1A)

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW; CCW; short-brake and stop. The two motor outputs (A and B) can be separately controlled; and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC; while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short; single pulse). This little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. Features: - Power supply voltage: VM = 15V max; VCC = 2.7-5.5V - Output current: Iout = 1.2A (average) / 3.2A (peak) - Standby control to save power - CW/CCW/short-brake/stop motor control modes - Built-in thermal shutdown circuit and low-voltage detecting circuit - All pins of the TB6612FNG broken out to 0.1" spaced pins - Filtering capacitors on both supply lines Links: - [Design Files & Support Documents @ GitHub](https://github.com/sparkfun/Motor_Driver-Dual_TB6612FNG/tree/V_1.1). 

5. Joy-it NEMA17-04 Stepper motor NEMA 17, 1.8°, 1.5 A, 3.3 V

NEMA17-04 - Stepper motor NEMA 17, 1.8°, 1.5 A, 3.3 V (NEMA17-04).

Joy-it NEMA17-04 Stepper motor NEMA 17, 1.8°, 1.5 A, 3.3 V (Motor)
Robotics module
CHF17.70

Joy-it NEMA17-04 Stepper motor NEMA 17, 1.8°, 1.5 A, 3.3 V

Motor

6. Velleman Stepper motor 12Vdc 60Ma (Angle 7.5° 48 Steps)

For office machines, automatically controlled machines, split air conditioners, office machines and
automatically controlled machines.

Velleman Stepper motor 12Vdc 60Ma (Angle 7.5° 48 Steps) (Various, Motor)
Robotics module
CHF15.70

Velleman Stepper motor 12Vdc 60Ma (Angle 7.5° 48 Steps)

Various, Motor

7. Stereolabs ZED Mini Stereo Camera

The Stereolabs ZED Mini is a high-performance 3D camera for a wide range of applications. This camera has two 4MP cameras, enabling 2K (4416 x 1242Px) recordings with a frame rate of up to 100Hz. The ZED Mini is predestined for mixed augumented reality applications.

Dimensions

Technical data

Scope of delivery

- ZED Mini Stereo Camera

- 1.5 & 4m USB C cable

- VR Holder.
 

8. Benewake TFmini Plus I2C UART (12m)

The Benewake TFmini Plus is a very compact LiDAR, which has besides small dimensions a complete encapsulation against water and dust according to IP65. The measurement range is 0.1 - 12m, with a tolerance of less than 1% and an update rate of up to 1kHz. Due to this, the LiDAR is predestined for autonomous outdoor systems such as UAVs and UGVs.

Difference between TFmini & TFmini Plus

In direct comparison, the TFmini Plus has a protection class of IP65, which makes it protected against dust and water and therefore predestined for outdoor applications. An integration guide for the Pixhawk PX4 & PX2.1 can be found HERE http://ardupilot.org/copter/docs/common-benewake-tfmini-lidar.html.

Technical Data

- Measuring range: 0,1 - 12m

- Tolerance: +/-5cm @ 6m | <1% @ 12m

- Frame rate: 1 - 1000Hz

- Light irradiation: 70klux

- Protection class: IP65

- Interface: UART & I2C

- Operating voltage: 5V

- Current consumption: < 110mA.
 

9. Stereolabs ZED 2 Stereo Camera

ZED 2 - The optimal 3D camera for your demanding robotics project!

The Stereolabs ZED 2 is a very powerful 3D camera for a wide range of applications. Thus, this
camera has two 4MP cameras, enabling 2K (4416 x 1242Px) recordings with a frame rate of up to 100Hz. In addition, the camera has an integrated IMU, barometer & magnetometer, as well as a 120? Wide Angle lens, so that from now on even the edge areas can be reliably captured.

Furthermore, the ZED enjoys a wide support of third party software for the development of Augmented Reality, Perception or Machine Vision algorithms. Because of this, the Stereolabs cameras are already used in many projects, especially in the area of human robot interaction & 3D mapping under ROS.

Dimensions

Technical data

Scope of delivery

- ZED Stereo Camera

- Mini Tripod

- USB Stick with Driver & SDK

- Documentation.
 

10. Slamtec RPLIDAR A3M1 360° 10 - 25 m

Language: English, Recommended age: 16 years, Compatible educational computers: Universal.

Product order
See all products