Top rated Water cooling hoses
This page always stays fresh and updates automatically.
1. Alphacool Ice pipe satin 13/10mm - set of 4
The most common hard tubes are clear and transparent. In addition, hard tubes made of brass and carbon have also gained popularity. Now, Alphacool offers the Ice Tube as part of its Ice product line. The surface visually resembles ice and feels like it too—somewhat rough, yet still smooth. The Ice Tube significantly alters the appearance within the system. Especially after filling the system, the actual effect is best observed. The water has the look of frozen ice. When the loop is illuminated with LEDs, clear hard tubes reflect the individual LEDs very well, but this is not the case with the Ice Tubes. Here, the light is diffused, resulting in a much softer and better illumination. The Ice Tube can be bent like all acrylic hard tubes using the appropriate bending tools. However, this noticeably changes the appearance of the Ice Tubes at the bends, no longer matching the original look. This can create an additional effect, but those who wish to maintain the Ice Tube appearance should use appropriate fittings for bends.
What our customers think
Pro
- no blistering in the temperature range used for bending.
- easy to process
- Easy to clean
Contra
- Nothing really, apart from the Digitec packaging
- far too expensive
- Oversized packaging
2. Alphacool HardTube 13/10mm Plexi (PMMA) Klar 40cm
The HardTube project is becoming a reality. Alphacool is taking a completely new approach and making a strong statement!
The most commonly used method for water cooling has been standard PVC hoses – now Alphacool offers another way to design a water cooling system. The HardTube variant brings even more order to the system, creating a much more structured appearance.
The acrylic tube can be easily adapted to the system with the appropriate bending tool, eliminating the need for additional angle pieces. To install the tubes into the system, they must be cut to the appropriate length.
Water cooling hoses
CHF53.95 CHF134.88/1m
Alphacool HardTube 13/10mm Plexi (PMMA) Klar 40cm
0.40 m, Plastic
3. Alphacool HardTube 13/10mm Plexi (PMMA) Clear 60cm - Set of 4
Neat appearance thanks to fewer fittings. With the Alphacool HardTube 13/10 set, implementing your next water cooling system is hassle-free. The four tubes are completely transparent, allowing the internal coolant to be clearly visible.
With the right bending tool, the acrylic tubes can be easily adapted to your system. This saves on fittings and achieves a clean look.
Technical details:
- Color: Transparent
- Material: Acrylic (PMMA)
- Length: 60 cm (total 240 cm)
- Outer diameter: 13 mm, 1/2"
- Inner diameter: 10 mm, 3/8"
- UV color: Not UV-active
- Delivery includes: 1x Alphacool HardTube 13/10 mm acrylic 240 cm set - transparent (4x 60 cm)
Note: Not compatible with Monsoon fittings. Due to the precisely manufactured tubes, the connections must be pushed on straight with a bit of force. Use only with clear, transparent cooling liquids. Particles and additives in pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers, and hoses. This may also void the manufacturer's warranty.
Water cooling hoses
CHF19.45 CHF32.41/1m
Alphacool HardTube 13/10mm Plexi (PMMA) Clear 60cm - Set of 4
0.60 m, Plastic
4. Alphacool Ice pipe 13/10mm - set of 4
The most commonly used method for water cooling so far has been standard PVC hoses. Now, Alphacool offers another way to design a water cooling system. The HardTube variant brings even more order to the system, creating a much more structured appearance. Brand new are the brass tubes, available in Black Chrome and Chrome, as well as acrylic tubes, carbon, and borosilicate glass. With the appropriate fittings and a very simple design, these can be connected or attached absolutely leak-proof. The PETG tube can also be easily adapted to the system with the right bending tool, without the need for additional angle pieces. To install the tubes into the system, they must be cut to the appropriate length. PETG tubes require lower temperatures than acrylic to bend and are generally a bit more flexible and easier to handle. The perfect entry into the world of HardTubes.
What our customers think
Pro
- Soften quickly and bend well
- easy to process
Contra
- Nothing really, apart from the Digitec packaging
- far too expensive
- Oversized packaging
5. Alphacool Hardtube acrylic 13/10mm bent 90 degree
The HardTube project becomes a reality. Alphacool is taking new paths and making a clear statement! The most commonly used method for water cooling has been regular PVC hoses. Now, Alphacool offers another way to design a water cooling system. The HardTube variant brings even more order to the system, creating a much more structured impression. Brand new are the brass tubes, available in Black Chrome and Chrome. With the appropriate fittings and a very simple functionality, these can be connected or attached absolutely tightly. The acrylic tube can also be easily adjusted to the system with the right bending tool, without the need for additional angle pieces. To install the tubes into the system, they must be cut to the appropriate length. The following variants are available: HardTube 13/10mm clear acrylic 20cm, 40cm, 60cm, and 80cm; HardTube 13/10mm brass chrome 20cm and 40cm; HardTube 13/10mm brass deep black 20cm and 40cm; HardTube 16/12mm clear acrylic 20cm, 40cm, 60cm, and 80cm; HardTube 13/10mm 90° acrylic 10/30cm, 20/40cm; HardTube 16/13mm 90° acrylic 10/30cm, 20/40cm. Due to the precisely manufactured tubes, the fittings need to be pushed on with a bit of force. Delivery includes: 1x Alphacool HardTube 13/10mm 90° acrylic (PMMA) 20/40cm. Attention: Not compatible with Monsoon fittings.
Water cooling hoses
Quantity discount
CHF14.20 per piece for 2 units CHF23.67/1m
Alphacool Hardtube acrylic 13/10mm bent 90 degree
0.60 m, Plastic
6. Alphacool Ice Tube 13/10mm Hard Tube Acrylic (PMMA) - Clear, 80cm ( Set of 4)
With the Ice Tube, the water cooling specialist Alphacool presents an interesting solution for water cooling enthusiasts. These are solid tubes made of acrylic plastic that can be cut to the required length by the user and bent to shape using a heat source.
This allows for the connection of individual water cooling components with longer, straight sections and precisely bent radii, providing an aesthetically pleasing alternative to traditional connections using hoses.
The offered transparent Ice Tube comes in a set of four, with an outer diameter of 13 mm and an inner diameter of 10 mm. The length is 80 centimeters. The tubes are compatible with any hard tube fitting with a 13/10 mm OD/ID.
Note: Due to the package size, delivery to a DHL parcel station is not possible.
Technical details:
- Material: Acrylic glass (PMMA)
- Color: transparent (colorless)
- Quantity: 4 pieces
- Outer diameter: 13 mm
- Inner diameter: 10 mm
- Operating temperature: -20 °C to 60 °C
- Maximum operating pressure: 4 bar (at 20 °C)
- Length: 800 mm each
- Compatibility: 13/10 hard tube fittings.
Water cooling hoses
CHF25.90 CHF32.38/1m
Alphacool Ice Tube 13/10mm Hard Tube Acrylic (PMMA) - Clear, 80cm ( Set of 4)
0.80 m, Plastic
7. Alphacool Hardtube acrylic 13/10mm
The HardTube project is becoming a reality. Alphacool is taking new paths and making a clear statement! The most commonly used method for water cooling has been standard PVC hoses. Now, Alphacool offers another way to design a water cooling system. The HardTube variant brings even more order to the system, creating a much more structured impression. Brand new are the brass tubes, available in Black Chrome and Chrome. With the appropriate fittings and a very simple functionality, these can be connected or attached absolutely leak-proof. The acrylic tube can also be easily adjusted to the system with the right bending tool, without the need for additional angle pieces. To install the tubes into the system, they must be cut to the appropriate length. The following variants are available:
- HardTube 13/10mm clear acrylic 20cm, 40cm, 60cm, and 80cm
- HardTube 13/10mm brass chrome 20cm and 40cm
- HardTube 13/10mm brass deep black 20cm and 40cm
- HardTube 16/12mm clear acrylic 20cm, 40cm, 60cm, and 80cm
Note: Due to the custom-fit tubes, the fittings must be pushed on with a bit of force. Delivery includes: 1x 80cm acrylic tube. Caution: Not compatible with Monsoon fittings. Note: Alphacool recommends using distilled water for optimal operation of the water cooling system!.
8. Alphacool HardTube 13/10mm borosilicate glass
Alphacool's HardTube family is gaining new members. The new hard tubes made of borosilicate glass give every system a whole new quality.
The most commonly used method for water cooling has been standard PVC hoses – now Alphacool offers another way to design a water cooling system. The hard tube variant brings even more order to the system, which gives it a much more structured appearance.
Borosilicate glass meets all the requirements that a water cooling system demands. Stability and brilliant appearance are not the only characteristics that lead to the choice of this glass, as it is also resistant to chemicals and temperature fluctuations. It is no coincidence that this glass is used throughout the chemical industry.
All glass tubes are compatible with Alphacool's HardTube fittings. Currently, Alphacool offers two classic sizes: tubes with a 16 mm outer diameter and tubes with a 13 mm outer diameter. Since this glass cannot be deformed, Alphacool also offers 90° angles in various lengths, allowing for the elimination of connection angle pieces.
9. Alphacool Hose
Hoses are the lifelines of the water cooling system! Here is the latest generation from Alphacool. Deep, vibrant colors and pleasant handling during installation and connection were our goals in hose development. The product consists of hoses in various sizes and colors such as red, green, blue, or black. In developing the hoses, we consciously worked to ensure that no color particles from the coolant would burden the water cycle, but rather that the power of color emanates from the hose itself. Besides the color, the installation and bending behavior of the hoses is of great interest. Bridging tight bending radii and providing a comfortable handling in tricky spots were also prioritized. This has been optimized to perfection through various plastic mixtures, resulting in a hose that harmonizes the sometimes development-restricting, opposing goals and will impress both beginners and advanced water cooling users! Manufacturing in Germany promises consistently high quality. Years of experience in production ensure that only the best product is sold. Technical specifications: Material: PVC, Color: Transparent, Inner diameter: 10mm, 3/8", Outer diameter: 13mm, 5/8", Wall thickness: 1.5mm. Delivery includes: 1x Alphacool hose AlphaTube HF 13/10 (3/8"ID) - Clear 3m.
What our customers think
Pro
- Stable, tear-resistant
- It was tight for me
- Simple installation
Contra
- Kinks in tight bends
- Is not crystal clear
- Not entirely clear
Water cooling hoses
Quantity discount
CHF14.20 per piece for 2 units CHF4.73/1m
Alphacool Hose
3 m, Plastic
10. Corsair Hydro X
Corsair Hydro X Series XT Softline 10/13mm Tubing, combined with Corsair Hydro X Series XF Compression Fittings, provides easy and flexible connections between your Hydro X Series custom cooling equipment. Put your coolant on display with fully transparent tubing made from highly durable, UV-resistant PVC material.
What our customers think
Pro
- No discolouration so far
- no discolouration
- Easy to cut to size
Contra
- Rather expensive
- bends quickly
- very flexible
Water cooling hoses
Quantity discount
CHF13.40 per piece for 2 units CHF4.46/1m
Corsair Hydro X
3 m, Plastic
Product order
See all products