Best Hailea products in the Water cooling radiators category
On this page you'll find a ranking of the best Hailea products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Hailea Ultra Titan 500 HC300
This continuous flow cooler essentially replaces the radiator, as the water is regulated down to a temperature set by you. Temperatures of up to 4°C are possible, but please note that condensation can form due to the temperature difference. The temperature can be set in single steps up to 28° C via the display. Appropriate insulation accessories (for hose and CPU) are also available. Alternatively, the chiller can be set to a value just below room temperature to avoid the problem of condensation.
Due to the low water temperatures, unimagined possibilities for overclocking are given. The service life of your components is increased many times over. Furthermore this system is also interesting for No Noise applications, because the chiller can be placed in another room. We recommend integrating the chiller as an additional cold source in a system next to an existing radiator. So you can switch off the normal radiator as needed (overclock / benchmark / midsummer etc) and the chiller will take over the cooling.
Which aquarium size does my continuous flow cooler cool?
The manufacturer's information is as follows:
Model / litre specification:
HC-130 / 50-100L
HC-150 / 50-200L
HC-250 / 100-300L
HC-300 / 100-400L
HC-500 / 200-800L
HC-1000 / 300-1000L
HC-2000 / 400-1500L
Here we would like to point out that the manufacturer's specifications were created under optimal conditions. For example, the temperature behaviour can vary considerably due to the insulation of the pool, the radiation of the lamps or the sunlight. Therefore we recommend to choose a larger model when reaching the upper limit of the litre values.
Note on compatibility: The chiller is supplied with connections for 1 inch hose (inner diameter approx. 19 to 20mm). The delivery includes 1 pair of straight and 1 pair of 90° angled connectors. To use the Chiller with standard connections we recommend art. 37018 (for G1/4) and 37019 (for G3/8).
2. Hailea Ultra Titanium 200 HC150
This chiller essentially replaces the radiator, as it cools the water to a temperature set by you. Temperatures as low as 4 °C are possible, but please note that condensation may occur due to the temperature difference. The temperature can be set in increments up to 28 °C via the display. Corresponding insulation accessories for hoses and CPUs are also available. Alternatively, the chiller can be set to just below room temperature to avoid the issue of condensation.
With the low water temperatures, unprecedented overclocking possibilities arise. The lifespan of your components is significantly increased. Additionally, this system is also interesting for no-noise applications, as the chiller can be placed in another room. It is recommended to integrate the chiller as an additional cooling source into a system alongside an existing radiator. This way, you can turn off the regular radiator as needed (for overclocking, benchmarking, during hot summer days, etc.), and the chiller will take over the cooling.
3. Hailea Ultra Titan 300 HC250
This continuous cooler essentially replaces the radiator, as the water is regulated down to a temperature set by you. Temperatures of up to 4°C are possible, but please note that condensation can form due to the temperature difference. The temperature can be set in single steps up to 28°C via the display. Appropriate insulation accessories for the hose and CPU are also available. Alternatively, the chiller can be set to a value just below room temperature to avoid the problem of condensation.
Due to the low water temperatures, there are numerous possibilities for overclocking. The service life of your components increases significantly. Furthermore, this system is also interesting for noise applications, as the chiller can be placed in a different room. We recommend integrating the chiller as an additional cold source in a system alongside an existing radiator. This way, you can switch off the normal radiator as needed (for overclocking, benchmarking, or during midsummer) and the chiller will take over the cooling.
Which aquarium size cools my continuous cooler? The manufacturer's specifications are as follows:
Model / Litre:
HC-130 / 50-100L
HC-150 / 50-200L
HC-250 / 100-300L
HC-300 / 100-400L
HC-500 / 200-800L
HC-1000 / 300-1000L
HC-2000 / 400-1500L
Please note that the manufacturer's specifications were created under optimal conditions. For example, the temperature behavior can vary greatly due to the insulation of the pool, the radiation of the lamps, or the exposure to sunlight. We therefore recommend choosing a larger model when reaching the upper limit of the litre values.
Compatibility note: The chiller is delivered with connections for 1 inch hose (inner diameter approximately 19 to 20mm). Included in the delivery are one pair of straight and one pair of 90° angled connections. To use the chiller with standard connections, we recommend art. 37018 (for G1/4) and 37019 (for G3/8).
4. Hailea Controller & Display Spare Parts for Ultra Titan 300 (HC250=265Watt cooling power...
Replacement control unit for Hailea Ultra Titan 300 (HC250).
Water cooling radiators
CHF54.90
Hailea Controller & Display Spare Parts for Ultra Titan 300 (HC250=265Watt cooling power...
5. Hailea Ultra Titan 4000 HC2000
This continuous flow cooler essentially replaces the radiator, as the water is regulated down to a temperature set by you. Temperatures of up to 4°C are possible, but please note that condensation can form due to the temperature difference. The temperature can be set in single steps up to 28°C via the display. Appropriate insulation accessories for the hose and CPU are also available. Alternatively, the chiller can be set to a value just below room temperature to avoid the problem of condensation.
Due to the low water temperatures, unimagined possibilities for overclocking are available. The service life of your components increases significantly. Furthermore, this system is also interesting for no noise applications, as the chiller can be placed in another room. We recommend integrating the chiller as an additional cold source in a system next to an existing radiator. This allows you to switch off the normal radiator as needed (for overclocking, benchmarking, or during midsummer) while the chiller takes over the cooling.
Which aquarium size does my continuous flow cooler cool? The manufacturer's information is as follows:
Model / litre specification:
HC-130 / 50-100L
HC-150 / 50-200L
HC-250 / 100-300L
HC-300 / 100-400L
HC-500 / 200-800L
HC-1000 / 300-1000L
HC-2000 / 400-1500L
Please note that the manufacturer's specifications were created under optimal conditions. For example, the temperature behavior can vary considerably due to the insulation of the pool, the radiation of the lamps, or sunlight. Therefore, we recommend choosing a larger model when reaching the upper limit of the litre values.
Note on compatibility: The chiller is supplied with connections for 1 inch hose (inner diameter approximately 19 to 20mm). The delivery includes one pair of straight and one pair of 90° angled connectors. To use the chiller with standard connections, we recommend item 2448626 (for G1/4).
Note: There is no power plug in this unit. We recommend using a safety plug.
6. Hailea Ultra Titanium 150 HC130
This continuous flow cooler essentially replaces the radiator, as the water is regulated down to a temperature set by you. Temperatures of up to 4°C are possible, but please note that condensation can form due to the temperature difference. The temperature can be set in single steps up to 28°C via the display. Appropriate insulation accessories for the hose and CPU are also available. Alternatively, the chiller can be set to a value just below room temperature to avoid the problem of condensation.
Due to the low water temperatures, unimagined possibilities for overclocking are available. The service life of your components is significantly increased. Furthermore, this system is also interesting for no noise applications, because the chiller can be placed in another room. We recommend integrating the chiller as an additional cold source in a system alongside an existing radiator. This way, you can switch off the normal radiator as needed (for overclocking, benchmarking, or during midsummer) and the chiller will take over the cooling.
Which aquarium size does my continuous flow cooler cool? The manufacturer's information is as follows:
Model / litre specification:
HC-130 / 50-100L
HC-150 / 50-200L
HC-250 / 100-300L
HC-300 / 100-400L
HC-500 / 200-800L
HC-1000 / 300-1000L
HC-2000 / 400-1500L
Here we would like to point out that the manufacturer's specifications were created under optimal conditions. For example, the temperature behavior can vary considerably due to the insulation of the pool, the radiation of the lamps, or sunlight. Therefore, we recommend choosing a larger model when reaching the upper limit of the litre values.
Note on compatibility: The chiller is supplied with connections for 1 inch hose (inner diameter approximately 19 to 20mm). The delivery includes one pair of straight and one pair of 90° angled connectors. To use the chiller with standard connections, we recommend art. 37018 (for G1/4) and 37019 (for G3/8).
7. Hailea Ultra Titan 2000 HC1000
This continuous flow cooler essentially replaces the radiator, as the water is regulated down to a temperature set by you. Temperatures of up to 4°C are possible, but please note that condensation can form due to the temperature difference. The temperature can be set in single steps up to 28°C via the display. Appropriate insulation accessories for the hose and CPU are also available. Alternatively, the chiller can be set to a value just below room temperature to avoid the problem of condensation.
Due to the low water temperatures, unimagined possibilities for overclocking are available. The service life of your components is significantly increased. Furthermore, this system is also interesting for no-noise applications, as the chiller can be placed in another room. We recommend integrating the chiller as an additional cold source in a system alongside an existing radiator. This allows you to switch off the normal radiator as needed (for overclocking, benchmarking, or during midsummer), and the chiller will take over the cooling.
Which aquarium size does my continuous flow cooler cool? The manufacturer's information is as follows:
Model / litre specification:
HC-130 / 50-100L
HC-150 / 50-200L
HC-250 / 100-300L
HC-300 / 100-400L
HC-500 / 200-800L
HC-1000 / 300-1000L
HC-2000 / 400-1500L
Here we would like to point out that the manufacturer's specifications were created under optimal conditions. For example, the temperature behavior can vary considerably due to the insulation of the pool, the radiation of the lamps, or sunlight. Therefore, we recommend choosing a larger model when reaching the upper limit of the litre values.
Note on compatibility: The chiller is supplied with connections for 1 inch hose (inner diameter approximately 19 to 20mm). The delivery includes one pair of straight and one pair of 90° angled connectors. To use the chiller with standard connections, we recommend art. 37018 (for G1/4) and 37019 (for G3/8).
8. Hailea Ultra Titan 1500 HC500
This chiller essentially replaces the radiator, as it cools the water to a temperature set by you. Temperatures as low as 4 °C are possible, but please note that condensation may occur due to the temperature difference. The temperature can be set in single steps up to 28 °C via the display. Corresponding insulation accessories (for hose and CPU) are also available. Alternatively, the chiller can be set to just below room temperature to avoid the issue of condensation.
With the low water temperatures, unprecedented overclocking possibilities arise. The lifespan of your components increases significantly. Furthermore, this system is also interesting for no-noise applications, as the chiller can be placed in another room. We recommend integrating the chiller as an additional cooling source in a system alongside an existing radiator. This way, you can turn off the normal radiator when needed (for overclocking, benchmarking, during hot summer days, etc.), and the chiller will take over the cooling.
What aquarium size does my chiller cool? The manufacturer's specifications are as follows:
Model / Liter rating:
HC-130 / 50-100 L
HC-150 / 50-200 L
HC-250 / 100-300 L
HC-300 / 100-400 L
HC-500 / 200-800 L
HC-1000 / 300-1000 L
HC-2000 / 400-1500 L
We would like to point out that the manufacturer's specifications were made under optimal conditions. The temperature behavior can vary greatly due to factors such as the insulation of the tank, the radiation from lamps, or sunlight exposure. Therefore, we recommend choosing a model one size larger when reaching the upper limit of the liter ratings.
Note on compatibility: The chiller is delivered with connections for 1-inch hose (inner diameter approximately 19 to 20 mm). The delivery includes one pair of straight and one pair of 90° angled connections.
9. Hailea Continuous cooler Ultra Titan 500 - White Special Edition
The Ultra Titan 500 flow cooler from Hailea is a highly advanced cooling device specifically designed for water cooling systems and aquariums. Featuring an innovative titanium heat exchanger, this model offers excellent cooling performance and is ideal for applications such as cold water therapy and cryotherapy. The White Special Edition is characterized by a modern design and the use of durable materials that ensure a longer lifespan. Additionally, the cooler is suitable for continuous operation and operates at a low noise level, making it a practical choice for various environments. The ability to reach water temperatures as low as 4 °C makes it particularly versatile. The flow cooler comes with a comprehensive accessory package that facilitates installation and enables optimal use.
- Titanium heat exchanger for optimal cooling performance
- Low noise level, ideal for continuous operation
- Suitable for cold water therapy and cryotherapy
- Reaches water temperatures as low as 4 °C
- Extensive accessories for easy installation.
