Water cooling monitoring
Quantity discount
CHF11.20 per piece for 2 units
Aqua Computer Temperature sensor inline G1/4
Best Aqua Computer products in the Water cooling monitoring category
On this page you'll find a ranking of the best Aqua Computer products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Aqua Computer Temperature sensor inline G1/4
This temperature sensor features a G1/4 thread on both sides, allowing it to be used with compatible fittings for any hose diameter. The sensor has a 60 cm connection cable and a two-pole connector.
2. Aqua Computer Connection cable for VISION flow sensor
Connection cable for connecting the flow sensor, compatible with control devices of the Vision series.
Water cooling monitoring
Quantity discount
CHF4.70 per piece for 4 units
Aqua Computer Connection cable for VISION flow sensor
3. Aqua Computer Flow sensor high flow 2, 2x G1/4
The Aqua Computer High Flow 2 flow sensor can be easily integrated into the cooling circuit and allows for continuous flow measurement. This flow sensor is additionally equipped with a temperature sensor to monitor the coolant temperature. The flow measurement is carried out via a rotor/impeller driven by the flowing coolant. The rotational speed is detected contactlessly through a magnetic measurement system. An optimally calibrated bearing play for each sensor ensures minimal operational noise. The sensor provides reliable measurements from approximately 35 l/h to 1000 l/h, making it ideal for most water cooling systems. Its symmetrical design allows the sensor to be integrated into the system without regard to flow direction. Additionally, the sensor can be operated in any installation position. The very low flow resistance meets the requirements of high flow systems. The High Flow 2 has significantly more compact dimensions than its predecessor. Housed in a stylish Acetal casing, the flow sensor is integrated with a very accurate and fast water temperature sensor. The stainless steel cover of the sensor is magnetically attached without screws. The connection threads are made in G1/4, allowing operation with a wide range of hose systems. Three M3 threads are integrated into the base for securing the sensor, with matching screws included in the package. Technical specifications: Dimensions: approximately 51 x 41 x 31 mm, connection thread G 1/4. A device with a flow sensor input is required to evaluate the flow signal; this is not included! Package includes: one flow sensor, one connection cable, three screws M3 x 6 mm.
4. Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button
This cable from Aquacomputer is used for emergency shutdown of the computer in the event of an alarm. It is compatible with the Vision series and is connected to the power button input of the mainboard without affecting the power button. Scope of delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex kryos NEXT with VISION VISION connection terminal for kryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Quick guide: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then test the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown, data may be lost because the operating system and open programmes will not be shut down properly! be terminated properly!
Water cooling monitoring
−6%
CHF14.70 was CHF15.70
Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button
5. Aqua Computer Replacement strainer for stainless steel filter
Replacement strainer for the popular Aquacomputer filter with stainless steel mesh, stopcocks, and installation orifice G1/4. Scope of delivery: 1x strainer.
Water cooling monitoring
Quantity discount
CHF10.40 per piece for 2 units
Aqua Computer Replacement strainer for stainless steel filter
6. Aqua Computer Passive cooler for aquaero 6, black
Mounting this passive heat sink on an aquaero 6 increases the heat dissipation from the power components and thus increases the output power of the fan ducts. In addition, the water cooler for aquaero 5 (Art. 20023) can be mounted on the passive cooler for active cooling. The passive cooler is also suitable for simultaneous mounting with the Real Time Clock (Art. 70215), but additional mounting material is included with the passive cooler.
Scope of delivery:
Aluminium heat sink for aquaero 6, black anodized
thermal pad
fixing material
Compatible to:
aquaero 6 PRO
aquaero 6 XT
Note: The aquaero 6 and the water cooler are not included in the scope of delivery! If the water cooler is used without a second or narrower elevation (very old variant), washers must be used for installation.
7. Aqua Computer aquaero power connect 24 pin ATX standby power ATX brea
Note: A connector for the relay output is additionally required for use with the switch output of the aquaero.
Water cooling monitoring
Quantity discount
CHF10.20 per piece for 2 units
Aqua Computer aquaero power connect 24 pin ATX standby power ATX brea
8. Aqua Computer internal USB connection cable
With the help of this internal USB connection cable, an internal USB device can be connected to a free USB header on the motherboard. The cable is 25 cm long and comes in a discreet black color. The connectors feature 5-pin sockets on both ends.
Technical details:
- Length (including connectors): 250 mm
- Color: Black
- Connectors: 2x internal USB socket (5-pin).
Water cooling monitoring
Quantity discount
CHF10.40 per piece for 2 units
Aqua Computer internal USB connection cable
9. Aqua Computer VISION Touch with ext. USB cable, IR, temp. measurement
The Aqua Computer VISION Touch is a versatile graphic display specifically designed for monitoring water cooling systems. With a high-resolution OLED display (128 x 64 pixels), it offers excellent image quality and allows for the display of various data in individually configurable formats, including lists, graphs, and charts. The device is equipped with an external USB Type-A interface, enabling easy connection to a PC. Operation is facilitated through four programmable buttons, ensuring user-friendly interaction. The integrated ambient temperature sensor allows for continuous temperature monitoring, and there is the option to configure alarm functions to respond to critical temperature values. The included clip stand provides stable placement for the display, making it ideal for use in various environments.
- OLED display with excellent contrast and viewing angle stability
- Individually configurable display formats for hardware data
- Integrated ambient temperature sensor with alarm function
- User-friendly operation via four programmable buttons
- Convenient clip stand for flexible placement.
Water cooling monitoring
CHF54.90
Aqua Computer VISION Touch with ext. USB cable, IR, temp. measurement
10. Aqua Computer 53026 Indoor Temperature Sensor Wired Temperature & Humidity Sensor
This temperature sensor features an extremely flat design, allowing it to be easily attached to any surface that needs measurement. The sensor is equipped with a two-pin plug, and the total length, including the sensor and plug, is approximately 70 cm.
Water cooling monitoring
−6%
CHF15.70 was CHF16.70
Aqua Computer 53026 Indoor Temperature Sensor Wired Temperature & Humidity Sensor