Best selling Storage water coolers from EKWB
On this page you'll find a ranking of the best EKWB products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. EKWB EK-RAM Monarch modules
With the various versions of the EK-RAM Monarch, EK Water Blocks has a cooler series in its range that can be used to provide excellent water cooling for Corsair's Dominator series of storage bars.
For this purpose, however, it is necessary to unscrew the attachment on the RAM modules to give way to the water coolers. Then the heat of the Corsair DIMMs is transferred directly to the Water Blocks via their rear edge.
In addition, the original heatsinks surrounding the Dominator bars transfer heat from the PCB to the top-mounted EK cooler. As good as this system works with the Corsair memory, it was unfortunate in the past that other manufacturers' DIMMs could not be cooled by EK WB.
With this additional kit from EK Water Blocks, this is finally possible. A total of four black plates made of anodized aluminum are included in the delivery, two of which each include a RAM bar. They have threads at the top so that an EK RAM Monarch cooler can be screwed on.
In total, two DIMMs per kit can be equipped, whereby all common DDR2/3 modules are supported, which are equipped with memory chips on both sides (double-sided). For latches in single-sided design, thicker thermal pads (1.5 mm) would have to be used than those included in the scope of delivery.
Note: To use the adapter boards, any original heat sinks that may be present must be removed from the RAM latch to be cooled, which will result in the loss of the manufacturer's warranty.
2. EKWB EkWaterBlocks EK-RAM Monarch Module
The EK-RAM Monarch is a cooling solution for Corsair's Dominator and Dominator GT series memory modules, designed to cool the RAM with water. To install it, the existing heatsink on the RAM modules must be removed and replaced with the EK-RAM Monarch modules. A EK-RAM Monarch cooler can then be screwed onto the threaded fittings on the EK-RAM Monarch modules, enabling water cooling for the memory modules.
Technical Specifications:
Dimensions: 123 x 35 mm (L x H)
Material: Nickel-coated aluminum
Color: Nickel
RAM Compatibility: All types of SDRAM (DDR/DDR2/DDR3/DDR4) with memory chips on both sides of the PCB. Support for single-sided RAM modules is only available with optional 1.5 mm thick thermal pads (not included) to compensate for the height of the absent memory chips on one side of the PCB.
EK-RAM Cooler Compatibility: EK-RAM Monarch (X2/X4)
Package Contents: 2x RAM adapters for two memory modules (4x individual plates), thermal pads, mounting screws, 2 mm hex key.
3. EKWB EK-Quantum Convection M.2 NVMe
The EK-Quantum Convection M.2 NVMe is a passive aluminum heatsink designed for M.2 NVMe solid state drives. It is no secret that M.2 NVMe SSDs can easily overheat, leading to throttling and a loss of valuable performance. This heatsink from EK Waterblocks effectively prevents thermal throttling in cases with adequate airflow.
This SSD cooler is easy to install and features a low-profile design that saves space. The heatsink employs a clever design for mounting double-sided SSDs. The backplate can be flipped and realigned with a different set of screws, increasing the distance between both cooling plates.
The heatsink is made from CNC-machined aluminum and is coated in silver. The backplate is also made of aluminum and is black anodized. The EK-Quantum Convection M.2 NVMe is compatible with all single-sided and double-sided 2280 M.2 NVMe SSDs.
Technical details:
- Material: Aluminum
- Color: Silver
- Compatibility: All 2280 M.2 NVMe SSDs (22 mm wide & 80 mm long)
- Package contents:
- 1x EK-M.2 NVMe Heatsink Front Cover
- 1x EK-M.2 NVMe Heatsink Backplate
- 4x Mounting screws M2x4mm
- 1x Thermal pad 0.5 mm
- 1x Thermal pad 1 mm
- Length: 1000 mm
- Compatibility: Connectors with a 14 mm outer diameter.
4. EKWB EK-Quantum Convection M.2 NVMe - nickel
The EK-Quantum Convection M.2 NVMe is a passive aluminum heatsink for M.2 NVMe solid-state drives. It is no secret that M.2 NVMe SSDs can easily overheat, leading to throttling and a loss of valuable performance. This heatsink from EK Waterblocks effortlessly prevents thermal throttling in cases with sufficient airflow.
This SSD cooler is easy to install and has a low, space-saving profile. The heatsink features a clever design for mounting double-sided SSDs. The backplate can be flipped and realigned with a different set of screws, increasing the distance between both heatsink plates.
The heatsink is made of CNC-machined aluminum and is coated with nickel. The backplate is also made of aluminum and is black anodized. The EK-Quantum Convection M.2 NVMe is compatible with all single-sided and double-sided 2280 M.2 NVMe SSDs.
Technical details:
- Material: Aluminum
- Color: Silver
- Compatibility: All 2280 M.2 NVMe SSDs (22 mm wide & 80 mm long)
- Package includes:
1x EK-M.2 NVMe Heatsink Front Cover
1x EK-M.2 NVMe Heatsink Backplate
4x Mounting screws M2x4mm
1x Thermal pad 0.5 mm
1x Thermal pad 1 mm
- Length: 1000 mm
- Compatibility: Connectors with a 14 mm outer diameter.
