Best Alphacool products in the Storage water coolers category
On this page you'll find a ranking of the best Alphacool products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Alphacool 17467 Computer cooling system part/accessories water block
The Alphacool Aurora Plexi X4 D-RAM water cooler offers the perfect cooling for your RAM in combination with the Alphacool D-RAM modules (manufacturer no. 17268). The digital RGB LED Aurora lighting also offers the ideal extension to your Alphacool Aurora products.quality and designThe cooler itself consists of a solid 4 mm thick copper block which is naturally nickel-plated. The design is now identical to all new Aurora products from Alphacool. As a pure Plexi block is not particularly attractive, we have added a beautiful black frame. The LED strip with the addressable digital LEDs has been integrated into the side of the RAM cooler and is flush with the cooler. Digital RGB lightingThe aRGB LED strip has six digital RGB LEDs. Enough to illuminate the entire RAM cooler homogeneously. Each LED can.
2. Alphacool Alpha Core M.2 NVMe PCIe 4.0 liquid cool 1022576
3. Alphacool HDX Apex M.2 2280 SSD Cooler, ARGB
Alphacool HDX Apex M.2 2280 SSD Cooler, ARGB - Acrylic (11969).
4. Alphacool 11435 Computer cooling system part/accessories
What is it? The Alphacool Eisblock HDX-3 water cooler provides the best cooling for your M.2 SSD. The included PCIe plug-in card, on which the cooler is mounted, also provides the SSD with the highest possible bandwidth of around 3900 MB/s. Highlights No more throttling of the SSD due to overheating Easy integration into your water cooling circuit through G ¼" thread Theoretical bandwidth of around 3900 MB/s possible Optimal protection of your SSD through the cooler The Alphacool Eisblock HDX-3 cooler provides superior cooling for your M.2 SSD. During high sustained data transfers, the performance of an M.2 SSD without cooling drops dramatically and can drop to as low as 10% of its actual performance. When transferring large amounts of data, the storage controller and the chips get very hot until a protection mechanism kicks in and the SSD's performance is severely throttled. This can be counteracted by actively cooling the SSD. After the HDX M.2 cooler for motherboards with M.2 slots and the passively cooled HDX-2 PCIe cooler, Alphacool goes one step further with the Eisblock HDX-3 and offers a water cooling system for this problem. The M.2 SSD is screwed onto the included PCIe board and the cooler is mounted on top of it. The cooler itself is made of nickel-plated copper, with a screwed acetal lid. The water flows completely over the entire SSD in the block, ensuring optimal heat transfer away from the M.2 SSD. The G1/4" connections also allow the cooler to be connected to any standard water cooling circuit. The PCIe board is plugged into a 4xPCIe slot and screwed to the case. Data can be transferred at a speed of over 3900 MB/s. This is a much higher bandwidth than most SSDs can use. Compared to conventional SATA SSDs in 2.5" format, this is an increase of 600%, as the maximum bandwidth for this connection is 640 MB/s. The plug-in card can also offer significantly better transfer rates in combination with the cooler compared to mainboard slots. This is because M.2 SSDs are often only connected with 2x PCIe on mainboards, which corresponds to a halving of the maximum data transfer rate. In addition, it is difficult to cool an M.2 SSD on a motherboard properly because the graphics card is usually mounted directly above or below it and the surrounding area heats up considerably. With the Alphacool Eisblock HDX-3 you can avoid all these factors and get the optimum performance out of your M.2 SSD. Specifications Dimensions (LxWxH): 120 x 81.5 x 20mm Material: Copper, Acetal Connectors: 2x GI/4" PCIe Card Type: 4x PCIe Compatibility: M.2 2280 PCIe SSDs Maximum Bandwidth PCIe Card: 3938 MB/s Included in delivery 1x Alphacool Ice Block HDX-2 PCe 3.0 x4 Adapter for M.2 NGFF with Passive Cooler - Black Mounting material PCIe plug-in card (M.2 adapter) Slot bracket CAUTION There is a protective film on the PCI-E plug-in contacts, which must be removed before commissioning. Mounting instructions Datasheet.
5. Alphacool HDX Pro Water - M.2 NVMe 2280 SSD - MCX Version
SSDs in M.2 format are now standard PC equipment. The high transfer rates and extremely low access times allow faster and more effective working or gaming on the PC. Alphacool offers the HDX Pro Water M.2 NVMe 2280 SSD cooler (MCX version) so that the full performance of the M.2 NVMe SSD can be utilised permanently. It is a useful addition to any water circuit and ensures that the M.2 SSD memory can realise its full potential.why an active M.2 cooler? due to their design, M.2 SSDs are only able to achieve their maximum performance for a short time. The controller chip heats up extremely quickly and begins to reduce the performance of the M.2 SSD at an early stage in order to prevent overheating. Independent tests have shown that the transfer rates of uncooled M.2 SSDs can drop after just 30 seconds during write operations. During read operations, the throttling usually occurs a few seconds later. With the Alphacool.
6. Alphacool WAR ES U-shape RAM water cooler 8-fold set
The Alphacool ES U-Form RAM water cooler was developed specifically for the high demands of high-performance RAM in server and workstation systems. Up to 8 RAM modules can be cooled efficiently with the U-shaped water cooler. Its flat design and versatile connection options make it easy to install in almost any server or workstation housing. Reliable cooling performance Modern RAM modules are becoming increasingly powerful and therefore generate more and more waste heat. Reliable cooling is essential to avoid loss of performance. This cooler fulfils this requirement. As usual with Alphacool, this water cooler is made entirely of copper to ensure maximum cooling performance. Simple installation Installation has been designed to be as simple as possible. The RAM modules are enclosed by two nickel-plated copper plates and plugged onto the mainboard. The water cooler is then guided over the RAM modules. The inlets and outlets to the front and sides allow flexible connection to the cooling circuit. Note: This cooler is only compatible with single-row equipped RAM modules, see picture or instructions. Technical data Dimensions (L x W x H) 185.26 x 62.46 x 21.50mm Material Copper Weight (water cooler solo) 240g Total weight (with RAM cooling plates) 530g Covered RAM slots Up to 8 Distance between cooling channels 5.47mm Pressure tested 0.8 bar Connections 2x G1/4???? In | 2x G1/4??? Out Colour black Warranty: 2 years ? Warranty conditions.
7. Alphacool WAR Apex RAM X4 Water Cooler Silver
The Alphacool Apex RAM X4 water cooler in combination with the Alphacool D-RAM modules offers maximum cooling performance for the RAM. As RAM is becoming increasingly powerful, it is advisable to reliably dissipate the heat generated with a RAM water cooler. The Apex optics and digital aRGB lighting ensure a stylish appearance. High-quality RAM cooler As modern hardware produces more and more waste heat, a powerful and reliable cooler is essential. The Apex RAM X4 with its 3mm thick nickel-plated copper cooling base offers exactly these features. It is specially optimised for the latest RAM generation. Installation of the Alphacool Apex RAM X4 water cooler is uncomplicated. Note: Additional Alphacool D-RAM modules are required for the RAM on which the Apex RAM X4 Water Cooler is mounted. Up to four RAM slots can be covered with the X4 cooler. Apex Design The Apex product line from Alphacool represents the highest level of perfection. First-class materials and innovative technologies guarantee a unique premium product. The design language harmonises perfectly with other Apex products, creating an impressive overall look. Digital aRGB lighting A total of five aRGB LEDs provide discreet but first-class lighting, with each LED being individually controllable via a corresponding controller or via the mainboard. This opens up many creative possibilities. Technical data Dimensions (L x W x H) 127.50 x 45.00 x 17.30mm Material Housing aluminium Material waterproof components PMMA (plastic) Material base nickel-plated copper Connections 2 x G1/4??? Power connection Digital aRGB 3-pin 5V Number of digital aRGB LEDs 5 Pressure tested 0.8 bar Maximum operating temperature 60??C Weight 270g Colour black / silver Warranty: 2 years ? Warranty conditions.
8. Alphacool D-RAM Module for D-RAM Cooler
The underestimated heat source "main memory" was declared war on the system of Alphacool D-RAM coolers. With these modules, the storage blocks are firmly clamped into the modules with the aid of the enclosed heat conduction pads in order to achieve optimum cooling results. After assembly, the separately available D-RAM coolers are screwed together in the required size. For optimum heat transfer between module and cooler, it is recommended to apply a very thin layer of heat conducting paste. Also compatible with older D-RAM coolers.
9. Alphacool HDX - M.2 SSD M01 - 80mm - Black
This cooler is a passive cooling system that provides more power. In addition, the cooler fits seamlessly into any system thanks to its original appearance.
Everything is included in the scope of delivery for easy installation: Thermal conduction pads, clamps and two cooling plates. First, the heat conducting pads are placed on the chips. The Cooling plates are then placed on these and fastened with the clamps.
Due to the low height of the Cooling plates, they do not interfere with the installation and dissipate the heat very quickly!
Storage water coolers
Quantity discount
CHF7.65 per piece for 3 units
Alphacool HDX - M.2 SSD M01 - 80mm - Black
10. Alphacool HDX - M.2 SSD M01 - 110m bk 1017613
Product information This cooler is a passive cooling system that provides more performance. In addition, the cooler fits seamlessly into any system thanks to its original look. Everything is included for easy installation: Heat conduction pads, brackets and two cooling plates. First, the heat-conducting pads are placed on the chips. The cooling plates are then placed on top of them and fastened with the clamps. Due to the low height of the cooling plates, they do not interfere with the installation and thus dissipate the heat very quickly! Technical data: Dimensions: 98 x 22 mm (L x W) Colour: black Weight: 29 g Scope of delivery: 2x cooling plate, 2x heat conduction pad 0.5 mm, 1x heat conduction pad 1 mm, 8x clips Mounting instructions: Alphacool HDX M.2 SSD M02.
Storage water coolers
Quantity discount
CHF5.85 per piece for 3 units
Alphacool HDX - M.2 SSD M01 - 110m bk 1017613