Best StarTech products in the SSD + Hard drive accessories category

On this page you'll find a ranking of the best StarTech products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. StarTech Adapter USB 3.0 to 2.5" SATA III

StarTech.com USB 3.0 to 6.35 cm (2.5&quot ) (6.4cm) SATA III Adapter Cable with UASP - USB 3.0 to SATA SSD/HDD Converter / Adapter Cable.

2. StarTech USB-C to SATA adapter

Type = USB to SATA adapter
Supported form factor = 2.5 inch
Dimensions = 45 x 43 x 5mm

StarTech USB 3.1 adapter cable for 2.5-inch SATA drives. The StarTech wired USB 3.1 Adapter allows you to use the USB Type C connector to connect your laptop directly to a 2.5-inch SSD or hard drive. Use it with the latest MacBook, Chromebook Pixel, or other laptops to quickly access your external drive. Fast and easy access to the external drive via your laptop's USB-C port Connect to a 2.5-inch SATA SSD/HDD with no accessories Portable, powered directly from the USB port Time-saving data transfer rates of 10 Gbps with Generation 2 USB 3.1 Supports SATA I, II, III (up to 6 Gbps) UASP support for enhanced performance Integrated USB cable. 

3. StarTech PCIE ADAPTER F. 2.5IN U.2 SSD

Install a 2.5-inch U.2 NVMe SSD via an available PCIe expansion slot on your desktop computer or server Add an NVMe U.2 SSD to your computer for ultra-fast data access. With this U.2-to-PCIe adapter, you can add a high-speed U.2-2.5-inch NVMe PCIe SSD (PCIe with 4 lanes), such as the Intel 750 Series, to your PC at an available x4 PCI Express expansion slot. 

StarTech PCIE ADAPTER F. 2.5IN U.2 SSD
SSD + Hard drive accessoriesavailable
–26%
only 9 of 9 remaining on sale
CHF31.70 was CHF42.60

StarTech PCIE ADAPTER F. 2.5IN U.2 SSD

4. StarTech Duplicator Dock

eSATA / USB 3.0 hard disk duplicator dock. The StarTech Dual 2.5-inch/3.5-inch Hard Drive Dock Duplicator lets you duplicate/clone an existing hard drive without using a host computer system. As a hard disk copier, the SDOCK2U33RE allows you to create an exact clone, sector by sector, from one hard disk to another. Supports 2.5-inch or 3.5-inch hard drives (HDD) and solid-state drives (SSD) eSATA and USB 3.Supports SATA III (6 Gbps) and UASP for optimal performance Supports dual drive capacity up to 4 TB per slot (8 TB total) Compatible with SATA hard drives Version I/II/III (1.5/3.0/6.0 Gbps) Compatible with USB 3.0/2.0/1.1 (5 Gbps/480 Mbps/1.5 Mbps) dual slot, design with drive doors and top slot. With support for SATA-III (6 Gbps), you can maximize efficiency with duplication speeds of up to 22 GB per minute and eSATA docking speeds of up to 6 Gbps. 

5. StarTech Adapter converter M.2 NGFF SSD to 2.5 inch SATA

Type = Converter
Supported form factor = 2.5 inch
Number of supported drives = 1

Adapter converter M.2 NGFF SSD to 2.5 inch SATA. Increase system performance by adding a Next Generation Form Factor (M2-SSD) in any 2.5-inch SATA application with the StarTech SAT32M225 M.2 SSD-to-SATA Adapter. Leverage the full potential of your SATA III controller with an M.2-SSD and avoid bottlenecks from file transfer speeds up to 6 Gbps. Supports 7mm or larger 2.5-inch SATA slots Supports B key M.2 SSDs Supports SATA Revision I/II/III (1.5/3.0/6.0 Gbps) 2.5-inch SATA form factor chassis Supports full-length solid-state M.2 NGFF (Next Generation Form Factor) hard drives (2230, 2242, 2260, 2280). 

6. StarTech IDE2SAT2

With the 40-pin IDE to SATA adapterIDE2SAT2, you can connect a SATA I/II/III drive to an availableIDE/ATA 33/66/100/133 motherboard port and add newer SATA drives while retaining your existing motherboard at a low cost.
The IDE/SATA adapter is a cost-effective solution to bridge the gap between the newer 2.5-inch/3.5-inch/5.25-inch SATA drives and older IDE mainboard ports. The IDE2SAT2 also provides support for OODs (optical drives), so you can use Blu-ray, DVD or CD-ROM drives with older IDE mainboards. 

7. StarTech com Standalone M.2 SATA & M.2 NVMe Duplicator and Eraser - HDD/SSD Cloner/Wiper for M.2

StarTech.com Standalone M.2 SATA & M.2 NVMe Duplicator and Eraser - HDD/SSD Cloner/Wiper for M.2 PCIe AHCI/NVMe, M.2 SATA, 2.5/3.5" SATA Drives - External Hard Drive Eraser/Duplicator, TAA. Supported HDD sizes: 2.5,3.5", Supported HDD interf. 

StarTech com Standalone M.2 SATA & M.2 NVMe Duplicator and Eraser - HDD/SSD Cloner/Wiper for M.2
SSD + Hard drive accessoriesavailable in a few days
CHF850.–

StarTech com Standalone M.2 SATA & M.2 NVMe Duplicator and Eraser - HDD/SSD Cloner/Wiper for M.2

8. StarTech M.2 PCIe SSD adapter

TO DUAL NVME M.2 SSD.

9. StarTech M.2 to U.3 adapter

Convert an M.2 NVME drive to a 2.5-inch form factor with a U.3 (SFF-TA-1001) interfaceConvert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5-inch form factor to install it in a U.3 drive bay or backplane.drive bay or backplane.Adapt while maintaining performanceChange the form factor of a 2242, 2260 or 2280 M.2 NVMe drive while maintaining PCIe Gen 4 read and write speeds. This adapter is designed without a chipset to maintain performance when adapting an M.2 drive to a 2.5-inch form factor.Hassle-free setupThe M.2 to U.3 Host Adapter is compatible with all operating systems, including Windows, macOS and Linux. No additional drivers or software required for installation and operation. The adapter includes M.2 drive and U.3 adapter mounting hardware.CompatibilityThe M.2 to U.3 host adapter is backwards compatible with previous versions of M.2 PCIe NVMe drives. It is not compatible with SATA or SAS host controllers, M.2 SATA SSDs or U.2 host interfaces.The StarTech.com Advantage. 

10. StarTech USB 3.1 GEN 2 DUAL-BAY DOCK

StarTech.com USB 3.1 (10 Gbps) Dual-bay hard drive docking station for 6.35 cm (2.5&quot ) (6.4cm) / 8.89 cm (3.5&quot ) (8.9 cm) SATA SSD / HDD with UASP.

See all products