Best Aoyue products in the Soldering iron accessories category

On this page you'll find a ranking of the best Aoyue products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Aoyue Heating Element C005A for Soldering Iron Handle B1002A

The heating elements should be replaced after a fall or any other mechanical damage, as they usually no longer provide proper heating performance.

You will receive a heating element for your desoldering gun of the new version of the Aoyue 474A+ / 701A+ station. 

2. Aoyue Housing Screws M5x6 Case Screw

These screws are used on the housing of the devices. If necessary, the screws can be replaced after opening, so that the appliance does not show any signs of opening or if a screw thread is defective. 

3. Aoyue Spare Part Diode FR107 PFS for Soldering Station

The diode is used in some Aoyue devices and can be easily replaced with this spare part in case of a defect.

4. Aoyue Spare Part Condenser 473 400V

The capacitor is used in some Aoyue devices and can easily be replaced with this original one if it is defective.

5. Aoyue Filter Pipe Pad for Solder Fume Extraction

The filter pads should be replaced after around 5-10 cleanings, as they then no longer have a proper cleaning effect and may also dissolve due to the cleaning agents used. For this reason, the corresponding filter pad is available here as a spare part. By using original spare parts, you can always be sure that you will maintain the full performance of your station! 

6. Aoyue Spare Part Metalfilm Resistor 0.33 Ohm

The metal film resistor is used in some Aoyue devices and can easily be replaced with this spare part if it is defective.

7. Aoyue 968 spare part handle 2738 screw fitting

Aoyue replacement part holding screw for the handle Aoyue 968/2738

Please also check our other replacement parts. If you need assistance with a malfunction of your Aoyue product, feel free to contact us. We are happy to help you. 

8. Aoyue Spare Part Switch for Soldering Station 738 / 768

The switch is used in some Aoyue stations, such as the Aoyue 738 and 768, and can be replaced with this spare part in the event of a defect.

9. Aoyue Spare Part Potentiometer 100kOhm

These potentiometers are used in some Aoyue stations. They are used to control the temperature or airflow range. If this potentiometer becomes stiff or is defective, it can be easily replaced with this series. The potentiometer has a 6 mm shaft and 100 kOhm. 

10. Aoyue Spare Part Pontentiometer 500kOhm

These potentiometers are used in some Aoyue stations (e.g., Aoyue 8032). They are used to control the temperature or airflow range. If this potentiometer becomes stiff or defective, it can be easily replaced with this series. The potentiometer has a resistance of 500 kOhm. 

See all products