Best Makeblock products in the Robotics module category

On this page you'll find a ranking of the best Makeblock products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Makeblock Me 130 Motor Pack-5V/10000RPM

This module is the updated version of the previous Me 130 motor. It
has the same dimension as before but now is added a RJ25 port and
motor drive chip. The module
does not require motor driver port as it
can rotate with dual-digital port. It supports Arduino but not the
mBlock of mBot.

FEATURES

* Driving motor with 5V voltage
* Support clockwise and anti-clockwise rotation
* Over-current and anti-reverse protection
* Equipped with LG9110 motor drive chip
* 10000RPM no-load speed with 5V voltage.
 

Makeblock Me 130 Motor Pack-5V/10000RPM (Me BaseBoard V1.0, Motor)
Robotics module
CHF21.90

Makeblock Me 130 Motor Pack-5V/10000RPM

Me BaseBoard V1.0, Motor

2. Makeblock Me RGB LED V1.1

Me RGB LED V1.0 is a shiny Me series module which has 4 full color
ws2812 RGB LEDs. With integrated chip, you can control each LED
individually to adjust its brightness
and creat any color by mixing
different amounts of red, green, blue. It is cost effective for you
using in shiny lighting interative project such as decorating your
robot or room.
 

Makeblock Me RGB LED V1.1 (Makeblock Mainboard, Various)
Robotics module
Quantity discount
CHF12.30 per piece for 2 units

Makeblock Me RGB LED V1.1

Makeblock Mainboard, Various

3. Makeblock MegaPi Shield for 3D Printer

Megapi Shield is one of MegaPi's pinboards and is one of the electronic modules of mGiraffe. It is mainly used to connect LCD module, position-limit switch/socket, fan module, LED module, and temperature sensor, etc. Every electronic module has corresponding port on the shield, so it is very convenient for you to connect them. Position-limit socket with three directions: X_STOP, Y_STOP, Z_STOP. 

Makeblock MegaPi Shield for 3D Printer (MegaPi, Makeblock Projects)
Robotics module
Quantity discount
CHF14.90

Makeblock MegaPi Shield for 3D Printer

MegaPi, Makeblock Projects

4. Makeblock mBot Add-on Pack 6 leg bot

mBot six-legged robot is a 3-in-1 expansion pack based on mBot.
You can construct "Beetle", "Mantis" and "Crazy Frog" with mBot and
the parts inside the pack.
The
mBot six-legged robot makes mBot more vivacious and enjoyable.
Let's get your six-legged robot move!
The mBot itself is not included and must be ordered separately.
 

Makeblock mBot Add-on Pack 6 leg bot (mBot, Construction kit, Motor)
Robotics module
CHF38.90

Makeblock mBot Add-on Pack 6 leg bot

mBot, Construction kit, Motor

5. Makeblock Me Micro Switch B

Me Micro Switch is a physical switch. It sends a signal to the
controller when it is triggered. It is perfect to use in conjunction
with makeblock components. The
Me-Micro Switch should be used with
Me-RJ25 Adapter. Make sure Me RJ25Adapter has been connected to
Me-BaseShield correctly.
 

Makeblock Me Micro Switch B (Makeblock Projects, Badges)
Robotics module
CHF15.90

Makeblock Me Micro Switch B

Makeblock Projects, Badges

6. Makeblock CyberPi Innovation Add-on Pack

The CyberPi Innovation Add-on Pack, designed specifically for AIoT and Python education and robotics competitions, includes CyberPi and various sensors and hardware components. The pack includes mBuild modules and electronic components that meet the additional sensor needs of students or teachers while learning computer science and technology.

Motor package: It can be used to create simple carts and movable structures such as automatic curtain machines to bring basic mobility to projects.

Servo Pack: It is used to precisely control projects such as

LED strip pack: Add dazzling lighting effects to projects, such as a sparkling Christmas tree.

Ultrasonic Sensor: Allow you to control hardware projects without touching them. A necessary component in projects such as smart bins and automatic barriers, as well as a powerful extension for DIY cars.

Multi Touch: The module with conductive wires allows you to trigger it anywhere. Its unique design makes it a good choice for musical instrument projects.

Slider: It can be used to input values and can be programmed to control the speed of motors, the angle of servos and the brightness of LED strips. The module can be combined with structural parts to build force gauges and more.

Parts list

- 3 x mBuild cable (200 mm)

- 2 x mBuild cable (100 mm)

- 1 x double-axis TT geared motor

- 1 x RGB LED strip (0.5 m)

- 1 x mBuild_MultiTouch

- 1 x mBuild ultrasonic sensor

- 1 x mBuild_Slider

- 1 x 9 g servo MS-1.5A package.
 

7. Makeblock Me UNO Shield

This module is a shield of Arduino UNO. It can turn Arduino pins into Makeblock RJ25 ports. You can connect Arduino UNO with Makeblock electronic modules. This shield provides a stable power, so it can drive many servos and motors. 

Makeblock Me UNO Shield (Arduino Uno, Steering, Microprocessor extension)
Robotics module
CHF26.90

Makeblock Me UNO Shield

Arduino Uno, Steering, Microprocessor extension

8. Makeblock Me Orion

Makeblock Orion is an easy-to-use mainboard based on Arduino Uno with improvements for education.
It provides eight RJ25 ports to connect to all the other Me series
modules with color-labels, can save you from horrible pin-wiring and help you focus on inventor amazing projects. Makeblock Orion supports most of programming software (Arduino / Scratch / AduBlock), and we offer the customized graphical programming software (Scratch for Robot / Makeblock HD App). 

Makeblock Me Orion (Makeblock Projects, Steering, Microprocessor extension)
Robotics module
CHF44.90

Makeblock Me Orion

Makeblock Projects, Steering, Microprocessor extension

9. Makeblock Me 4 Button V1.0

Me 4 Button V1.0 is great for all kinds of projects, can work as
function button or direction button to control your robots. There are
4 momentary buttons on the
PCB board which have a great "click" to
them. They all share an analog output and different analog values
reflect different buttons. You can easily connect it to Me BaseBoard
V1.0 or Me BaseShield V2.0 by 6 Pin RJ25 cable.
 

Makeblock Me 4 Button V1.0 (Makeblock Projects, Me BaseBoard V1.0, Me BaseShield V2.0, Badges)
Robotics module
CHF12.90

Makeblock Me 4 Button V1.0

Makeblock Projects, Me BaseBoard V1.0, Me BaseShield V2.0, Badges

10. Makeblock MegaPi

MegaPi is a microcontroller board based on ATmega2560. With abundant
motor driver interfaces, it can control and combine different kinds of
motors rapidly, drive
10 servos and 8 DC motors/ 4 stepper motors
simultaneously and have a maximum output current of 10A.
MegaPi can be programmed with Arduino software (IDE) or graphical
programming language. It is even better that MegaPi works perfectly
with Raspberry Pi, by which makers will be able to drive motors and
sensors with Python!
With strong motor-driving ability and ease of use, MegaPi is an ideal
option for 3D printer, CNC, robotic project etc.
 

Makeblock MegaPi (Raspberry Pi, Steering, Microprocessor extension)
Robotics module
CHF52.90

Makeblock MegaPi

Raspberry Pi, Steering, Microprocessor extension