Best selling Robotics kits from Robotis
On this page you’ll find a ranking of the best Robotics kits from Robotis. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Robotis STEM Level 2
The ROBOTIS STEM series includes instructions and components for teaching robotics at the secondary level II, specifically for 10th grade and upper grades.
Fundamentals of Robotics
Structured Approach
Teaching of Electricity and Electronics
Building and Programming a Robot
Problem Solving
All of these steps are, of course, illustrated in exploded views to achieve a steep learning curve. The ROBOTIS STEM product range aims to alleviate children's and students' fear of new technologies while simultaneously fostering interest in the subject matter.
Learning Objectives
The ROBOTIS STEM Level 2 set is suitable for both beginners and advanced groups, making it easy to integrate this set into the curriculum for grades 10 to 12. This is ensured by the modular design combined with a wide selection of included components.
The ROBOTIS STEM sets form a series of progressively advanced kits. The difficulty level of the robots to be built, as well as the complexity of the included sensors or drive technology, increases from kit to kit. Consequently, the components from Level 1 are also required for building the ROBOTIS STEM Level 2 kit.
2. Robotis BIOLOID Premium Kit
The ROBOTIS BIOLOID Premium Kit is based on DYNAMIXEL servomotors and associated control electronics, and it has been designed for children and students. Due to its modular structure, various robot variants can be built using the 18 included DYNAMIXEL servomotors.
In addition to numerous DYNAMIXEL servomotors, various sensor and accessory components are also available to equip the robot with artificial intelligence (AI). The data processing is handled by the ARM Cortex M3 microprocessor located in the ROBOTIS CM-530, which is based on a 32-bit architecture.
3. Robotis Dream II Level 2
The ROBOTIS Dream II Series is designed for early robotics education and aims to teach the fundamentals of robotics in a playful manner combined with a structured approach. Each set comes with an illustrated manual, which is divided as follows:
- Learning the basics
- Building the desired robot
- Experimenting with possible movements
- Problem-solving
- Building a self-developed robot
All of these steps are illustrated with exploded diagrams to achieve a steep learning curve. The ROBOTIS Dream product range aims to alleviate children's and students' fears of new technologies while simultaneously fostering their interest in the subject.
The Robotis Dream Level 2 Kit introduces the structure of robots, sensors, and microphone sensors in a playful way.
The ROBOTIS Dream II is a series of progressively building kits. The difficulty of the robots to be built and the complexity of the included sensors or drive technology increases from kit to kit, which is why components from the Level 1 and Level 2 kits are also required for building the ROBOTIS Dream II Level 3 Kit.
4. Robotis Servo motor DYNAMIXEL XM430-W210-T
The DYNAMIXEL XM430-W210-T servo motor is a highly advanced product specifically designed for use in robotics projects. With a compact size of 46.5 mm in length, 28.5 mm in width, and 34 mm in height, this servo motor offers a powerful solution for various applications. It is suitable for individuals aged 12 and older and can be used in conjunction with the Robotis Engineer Kit, making it an ideal choice for learning and educational purposes. The motor is powered through the mains and is compatible with the corresponding software known as engine. The package includes a servo motor that is characterized by its precise control and high reliability. The DYNAMIXEL XM430-W210-T is thus a valuable component for anyone involved in robotics and automation.
5. Robotis DYNAMIXEL XL430-W250-T
General
The Dynamixel X series is the latest series of network servo motors from ROBOTIS. The XL430-W250-T servo motor features contactless magnetic encoders, enabling 360° rotations at speeds of up to 61 RPM. It can achieve torque of up to 1.5 N·m at an applied voltage of 12 V. These outstanding performance characteristics, combined with an extremely low weight of only 57.2 g, make it a very powerful servo motor for universal applications.
Cable Management
In addition, the cable management of the Dynamixel X series has been fundamentally redesigned, resulting in even higher reliability. The cables are no longer connected at the back of the servo motor as in the AX/MX series, but are routed past the pivot points, which reduces cable stress and minimizes exposed cables.
Mounting
The mounting of the Dynamixel X series can be done in various ways. However, when using mounting profiles, it is important to use the included spacer rings.
Technical Specifications
Servo Motor: XL430-W250-T
Weight: 57.2 g
Dimensions: 28.5 x 46.5 x 34 mm
Gear Reduction Ratio: 258.5:1
Torque: 12 V 1.5 N·m | 11.1 V 1.4 N·m | 9.0 V 1.0 N·m
RPM: 12 V 61 | 11.1 V 57 | 9.0 V 47
Internal uC: STM32F103C8 72 MHz Cortex M3
Encoder: Contactless Magnetic Encoder
Position Accuracy: 0.088° x 4096 steps
Operating Voltage: 6.5 - 12 V, recommended: 11.1 V
Protocol: Half Duplex TTL
ID: 0 - 252
Baud Rate: 9600 bps - 4.5 Mbps
Delivery Contents
1 x DYNAMIXEL XL430-W250-T Servo Motor
1 x Servo Horn (HN11-N101)
1 x Data and Power Cable X3P
5 x Spacer Rings
Various Screws and Nuts.
6. Robotis DYNAMIXEL U2D2
The ROBOTIS U2D2 communication module serves as the interface for data transmission between a computer/development board and Dynamixel servomotors. Despite its compact design, it is possible to configure, control, and monitor servomotors from the Dynamixel AX/MX/X and Pro series. This is made possible by the integrated JST 3Pin and 4Pin headers (TTL/RS485).
Technical Specifications
Scope of Delivery
U2D2 Module
X3P & X4P Convertible Adapter Cable
Micro USB Cable Type-B.
7. Robotis Servo motor controller DYNAMIXEL Shield for Arduino MKR
The DYNAMIXEL Shield Servo Motor Controller for Arduino MKR from Robotis is a versatile robotics kit specifically designed for integration with Arduino platforms. This controller board enables easy control of DYNAMIXEL servo motors and is ideal for educational and development projects in the field of robotics. With a recommended age limit of 12 years, the product is aimed at learners and hobbyists looking to expand their skills in robotics. The kit is compatible with the Robotis Engineer Kit and offers a user-friendly interface for programming and controlling servo motors. It is an excellent choice for anyone looking to enter the world of robotics or expand their existing projects.
- Compatible with DYNAMIXEL servo motors
- Designed for use with Arduino platforms
- Easy integration into robotics projects
- Suitable for learners aged 12 and up.
8. Robotis Servo motor DYNAMIXEL XM430-W210-R
The DYNAMIXEL XM430-W210-R servo motor is a highly advanced product specifically designed for use in robotics projects. With a compact design measuring 46.5 mm in length, 28.5 mm in width, and 34 mm in height, this motor provides a powerful solution for various applications. It is lightweight, weighing only 150 grams, making it ideal for mobile robots and other mechanical systems. The servo motor is suitable for individuals aged 12 and up and can be used with the Robotis Engineer Kit, making it an excellent choice for educational and hobby projects in the field of robotics. Its compatibility with the software engine allows for easy programming and control, enabling users to bring their creative ideas to life. The DYNAMIXEL XM430-W210-R is therefore a valuable component for anyone involved in robotics and automation.
9. Robotis OpenCR1.0 Dynamixel Controller
General
The ROBOTIS OpenCR1.0 is an open-source and ROS-compatible (Robot Operating System) controller board featuring a powerful 32-bit ARM Cortex-M7 MCU and an MPU9250 sensor. Additionally, this embedded controller board offers various interfaces and the capability to plug in and control Arduino expansion boards.
Features
- Full ROS and Arduino support
- Control of DYNAMIXEL AX/MX/X/RX/Pro Series
- RS485 and Half Duplex UART interface
- Integrated compass, accelerometer, magnetometer
Technical Specifications
Included in the package
- ROBOTIS OpenCR1.0 controller board
- USB cable.
10. Robotis Dynamixel servo motor XL-320
The Dynamixel Servomotor XL-320 from Robotis is a compact and powerful digital servomotor specifically designed for use in DIY robot projects and rapid prototyping. Weighing only 16.7 g and featuring compact dimensions, the XL-320 is ideal for applications where space and weight are critical. The motor offers a high resolution of 0.29° and a gear ratio of 238:1, enabling precise movements. It is equipped with a TTL-based control signal and supports a variety of feedback options, including position, temperature, and input voltage. The Dynamixel XL-320 is designed for operating temperatures ranging from -5℃ to +70℃ and has a recommended operating voltage of 7.4 V, making it a reliable choice for various applications.
- Compact design for space-saving applications
- High resolution of 0.29° for precise movements
- TTL-based control signal for easy integration
- Versatile feedback options for comprehensive control.
Product order
See all products