Best selling Relays from Schalk
On this page you'll find a ranking of the best Schalk products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Schalk TDS U1 DALI touch dimmer control unit
Compact, easy-to-install DALI-2 certified control unit with integrated DALI bus power supply for converting button commands into DALI protocols in broadcast mode. Short press for on/off, long press for dimming up and down. Suitable for light sources with dimmable DALI ballast. The integrated power supply can support up to 35 DALI devices. No DALI programming device required. Dimensions: 43 x 43 x 18 mm, 230 V AC.
2. Schalk Nachlaufrelais
Schalk overtravel relay UP with NR U3.
3. Schalk SCHAL MGR U2 Motor group relay 230VAC 2 CO contact 5A
Discover the Motor Group Relay MGR U2, a practical solution for electrically connecting up to 2 roller shutter or blind motors to a single control. With this relay, you can combine multiple motors into a group that can be operated together, without needing a separate control for each individual drive.
Simple and cost-effective, the MGR U2 provides 2 complete up/down outputs for the direct connection of 2 motors. This allows you to easily and affordably group your roller shutter or blind motors and control them conveniently together.
Reliable functionality: A mutual locking mechanism for the outputs ensures that only one direction of operation can be activated for the motors at any time. This guarantees reliable and safe operation of your roller shutters or blinds.
Flexible installation options: The MGR U2 is designed for flush mounting and can be easily integrated into your existing electrical installation. Its compact dimensions of 43x43x18.5 mm allow for discreet integration into your spaces.
Technical details:
- Product group: Blind separation relay
- Central input: Yes
- Secondary input: Yes
- Number of connectable motors: 2
- Rated voltage: 230 V
- Rated current: 4 A
Installation note: Please note that non-plug-ready electrical devices or components (without plugs) that are operated and delivered at up to 400 V must be installed by a qualified electrician. Please also read the operating instructions carefully to ensure safe installation.
Optimize the control of your roller shutter or blind motors with the Motor Group Relay MGR U2. Simplify your operation and benefit from an efficient solution for your applications. Order now and take your electrical systems to the next level!.
4. Schalk Impulsschalter
The pulse switch from Schalk is a compact 24V UC switching relay designed for box installation. With a low power loss and two separate magnet systems, this relay offers a reliable switching solution for various applications. It has two potential-free changeover contacts, each of which can switch a current of up to 10 amps. The compact dimensions of 43x43x18.5 mm allow easy integration into existing systems. This product is ideal for use in automation technology and other electrical applications where precise control is required. Two separate solenoid systems for improved performance. Potential-free changeover contacts with 10A switching current. Compact design for easy box installation.
5. Schalk SCHAL ISS U1 Impulse switch 230V AC, 1 NO contact 16A (flush-mounted)
The electronically controlled impulse switches ISS and ISS U1 can be used without any issues in environments where conventional electromechanical impulse relays are perceived as disturbingly loud, thanks to their very quiet switching behavior. The flush-mounted version ISS U1 230V AC is also suitable for easily retrofitting existing systems or for renovating older buildings, and due to its compact dimensions, it can be installed in switch or junction boxes. Relay contacts normally open, potential-free, 10A 250V AC, dimensions: 43x43x18.5mm ISS U1.
6. Schalk Energy storage relay
Schalk Energy Storage Relay ESR 1 Manufacturer :Schalk Designation :Energy Storage Relay 230V AC Type :ESR 1 Electrical connection type :Screw connection With detachable terminals :no Rated current :8 A Rated control supply voltage Us at AC 50 Hz :230 V Rated control supply voltage Us at AC 60 Hz :230 V Voltage type for actuation :AC Switching behaviour of the drive :monostable Number of contacts as normally closed :1 Number of contacts as normally open :1 With positively driven contacts :yes Type of switching contact :other Complete device with base :yes With LED display :yes Width :18 mm Height :88 mm Depth :58 mm Schalk energy storage relay ESR 1: further details By using mechanical latching, power contactors can be kept in the switched state without using energy. However, this energy-saving operation is not generally applicable. If, for example, a contactor must automatically fall back to the switched-off state in the event of a mains voltage failure, mechanical latching could not be used until now. The ESR 1 generates a switch-on pulse and stores energy. Thus, it can not only bring a contactor into mechanical latching, but also reliably release it again automatically when the mains voltage fails, dimensions: 18x55mm, 230V AC , EAN: 4046929601177.
7. Schalk SCHAL RDW 1 Double relay 2 x 24V UC, 2 changeover contacts 10A
The Schalk RDW 1 double relay is a highly functional switching relay designed for applications with an output voltage of 24 volts DC. It features two separate magnetic systems that enable efficient switching while minimizing power loss. With two changeover contacts, each supporting an output current of up to 10 amperes, this relay is ideal for various electrical control and automation projects. Its compact dimensions of 18x55 mm make it easy to fit into different installations. The product is manufactured in Germany and offers reliable performance for demanding applications.
- Low power loss due to optimized design
- Two separate magnetic systems for improved efficiency
- Two changeover contacts with 10A output current each
- Compact design for versatile applications.
8. Schalk Isolating relay
Schalk Active Isolation Relay ATR U2
Manufacturer: Schalk
Designation: Active Isolation Relay 1W, 230V AC/24V DC PELV
Type: ATR U2
Electrical connection type: Screw connection
With removable terminals: no
Rated current: 10 A
Rated control supply voltage Us at AC 50 Hz: 207..253 V
Rated control supply voltage Us at AC 60 Hz: 207..253 V
Rated control supply voltage Us at DC: 24 V
Voltage type for actuation: DC
Switching behavior of the actuator: monostable
Number of contacts as changeover: 1
With forced-guided contacts: yes
Type of switching contact: Single contact
With LED indicator: yes
Width: 43 mm
Height: 43 mm
Depth: 18.5 mm
The ATR U2 allows for the simplest control of mains voltage consumers through low voltage contacts. A power supply for actuating the relay coil is not required, as the ATR U2 internally generates the necessary control voltage (24V DC PELV). In conjunction with the magnetic contact MKW 1, it is thus possible to implement a supply air monitoring system, often required for enclosed spaces, when operating exhaust fans with minimal effort. However, due to the 10A changeover contact, the ATR U2 is also very versatile for other applications. Dimensions: 43x43x18.5 mm, 230V AC - 1W 10A.
9. Schalk FS3 HS 4
Schalk Mini-Funk-Handsender FS3 HS 4 Manufacturer :Schalk Designation :Mini-Funk-Handsender 4Kanal 3VDC m.. Batt. Type :FS3 HS 4 Radio frequency :433.92 MHz Range :30 m Number of commands :4 With radio hand transmitter :yes With radio coding device :yes Keypad protection cover :yes Power supply :Battery Schalk mini radio hand transmitter FS3 HS 4: more details The mini radio hand-held transmitter (key fob) FS3 HS 4 serves as a handy remote control for Schalk receiver relays and radio dimmers of the FE3/FD3 series. The transmitting address is set with a DIP switch. It can be set to be compatible with the other hand-held transmitter types if they are used in parallel. The transmitting power allows a free-field range of 30m., Compatible products: Radio receiver FE3 series, Radio dimmer FD3 series, Repeater FV2 R., Dimensions: 57x35x11mm, Spec.: 3V DC, 4-channel (4 buttons) , EAN: 4046929101417.
10. Schalk DIN rail clip HC 35 DIN rail adapter 4046929901048
The HC 35 DIN rail clip from Schalk is a practical accessory for mounting devices on 35 mm DIN rails. This clip allows for the secure attachment of devices that do not have their own snap-on mechanism. With its robust construction and easy handling, the HC 35 is ideal for use in various electrical installations. The clip is manufactured in Germany and provides a reliable solution for DIN rail mounting. With this product, users can enhance the efficiency of their installations while ensuring safety. The DIN rail clip is an essential element for professionals who value quality and functionality.
- Enables the mounting of devices without their own snap-on mechanism
- Robust construction for reliable attachment
- Ideal for use in electrical installations.
