Best selling RC motors from Hobbywing
On this page you’ll find a ranking of the best RC motors from Hobbywing. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Hobbywing Speed controller Quicrun 1060
Hobbywing QuicRun WP 1060 60A brush regulator
The regulator is specially designed for beginner and intermediate modelers. It is easy to use but at the same time very robust. It is equipped with automatic throttle calibration. The waterproof and dustproof housing will find use in all weather conditions. Drive in water, snow, dust, or mud without worry!
Reliable hardware combined with advanced software not only ensures high power output but also protects the system from overloads. The QuickRun WP 1060 regulator will find application in many RC vehicles with brush motors. It is dedicated for 1:10 scale models.
Manufacturer: Hobbywing
Model: HW30120201
Scale: 1:10
Continuous / instantaneous current: 60A / 360A
Power supply: 2-3S LiPo / 6-9 Cell NiMH
BEC output: Pulse: 6V / 3A
Input cables: Red - 16AWG - 100mm / Black - 16AWG - 100mm
Output cables: Blue - 16AWG - 100mm *1 / Yellow - 16AWG - 100mm
Input Connector: Large Tamiya connectors
Output connector: Connector 4.0 bullet
Set button on ESC: Inactive
Led Program Box: Inactive
LCD Program box: Inactive
Wifi module: Inactive
Programming port: Jumper Cap
Software update: Inactive
Size: 36.5 x 32 x 18mm
Weight: 39 grams
Dedicated: 1/10th Touring Cars / Buggies / Trucks / Rock Crawlers.
2. Hobbywing Programming box
This LED programming box is suitable for programming HobbyWing brushless controllers. The programming of the controllers is simple and quick with this LED programming box. Small enough to always have it ready for use.
Compatible with the following HobbyWing products:
- Platinum V1/V2 series and FlyFun V5 series of brushless flight controllers
- XeRun series (most), EzRun, and QuicRun series of brushless car controllers
- SeaKing series of brushless boat controllers
Technical specifications:
Note: If the controller does not have a BEC, an external BEC or a battery is required for operation.
Dimensions: 88 x 58 x 14 mm
Weight: 40 g
Input voltage: 4.8 V - 8.4 V.
3. Hobbywing QuicRun 3660SL G2 Sensorless Motor 3700kV 5mm Shaft
Even stronger with an almost explosive power, the Quicrun 3660 G2 motor stands out. It adds over 10% more performance than its predecessor while generating even less heat. The strengths of this motor series are further supported by individual high-quality components, such as the hardened aluminum cover and the internal wires that can withstand temperatures of up to 200 °C. As usual, the motor can be easily disassembled for simple maintenance tasks.
Features:
- More acceleration and explosive power delivery than the predecessor.
- Suitable for the Quicrun WP10BL120 G2 controller from Hobbywing, for example.
- CNC-machined aluminum housing.
- Additional high-quality components for high durability and smooth operation.
- Easily disassembled for maintenance tasks.
4. Hobbywing Fan with cooling fins for 36mm motor length
The Hobbywing fan with cooling fins is a high-quality accessory for 36 mm motors, specifically designed for use in RC cars. This fan provides effective cooling for the motor, optimizing performance and extending the motor's lifespan. Equipped with a robust aluminum heatsink, it offers excellent heat dissipation. The fan is easy to install and integrates seamlessly with Hobbywing motors, making it an ideal choice for model-building enthusiasts who value reliability and efficiency. Its compact design and thoughtful construction allow for hassle-free integration into various RC models. With a maximum speed of 5300 RPM, the fan ensures that the motor stays cool even under demanding conditions, enhancing the overall performance of the vehicle.
- Effective cooling for 36 mm motors
- Robust aluminum heatsink for optimal heat dissipation
- Maximum speed of 5300 RPM
- Easy installation and seamless integration with Hobbywing motors.
RC motors
Quantity discount
CHF8.90 per piece for 4 units
Hobbywing Fan with cooling fins for 36mm motor length
5. Hobbywing Fan with cooling fins for 44mm motor
The Hobbywing fan with cooling fins is a high-quality accessory specifically designed for 44 mm motors. This fan features a slip-on aluminum heatsink that ensures effective cooling of the motor. With a compact design of 50 x 50 mm, the fan helps regulate the motor's temperature during operation and prevents overheating. This is especially important for the performance and longevity of RC motors, as overheating can lead to damage. The fan is made from sturdy metal, providing a reliable solution for anyone looking to operate their RC models optimally. Weighing 110 grams, it is lightweight yet stable enough to meet the demands of use.
- Slip-on aluminum heatsink for improved cooling
- Effective temperature regulation to prevent overheating
- Sturdy metal construction for durability and reliability.
6. Hobbywing Quicrun Fusion
The QuicRun Fusion Pro is the evolution and improvement of Hobbywing's first 2-in-1 combo, the standard Quicrun Fusion. 1/10 crawlers now benefit from a space- and weight-saving motor and controller combined into one unit. Now even stronger and better. Often, space in the vehicle is limited, leaving little room to neatly arrange the various cables. But that is finally a thing of the past. With a length of only 58 mm, which is just about the size of a typical motor, and a weight of only 209 g, you won't even notice that the motor and controller are combined. Thanks to the intelligent torque and speed control, a crawler with this combo can easily adapt to any situation. Of course, the Fusion Pro is equipped with an excellent waterproof and dustproof casing. This means that the fun truly knows no bounds. Even the electronic switch is appropriately protected. The technology used is called FOC (Field-Oriented Control) and is responsible for this superb control feel. The power of this drive has increased by a solid 8% compared to its predecessor, and power consumption has even been reduced by 30%. This results in less battery capacity being used and extended driving time.
Features:
- 2-in-1: Motor and controller combined
- Compact design ideal for saving space and reducing weight
- Noticeable power improvement
- FOC drive, ideal for crawlers
- 3 operating modes: Normal (Forward, Reverse with Brake), Normal (Forward, Reverse).
7. Hobbywing Skywalker V2 50A 3-4s, 5A BEC
The Skywalker series is back, and in version 2, it is now even more powerful while still being just as affordable as its predecessor. The Skywalker controllers are primarily designed for RC airplanes and offer all the features that any flying enthusiast could desire. This includes a built-in 32-bit microprocessor with a clock frequency of up to 96 MHz and programming options that are on par with the previous model. These options include brake type, braking force, cutoff voltage, LiPo cell settings, startup and search modes, as well as timing and active freewheeling.
Of course, these controllers also undergo strict quality assurance by HobbyWing to ensure maximum safety and enjoyment. The Skywalker controllers are particularly well-suited for RTF models and beginners assembling their first model.
Features
- Compatible with various brushless motors
- Integrated 32-bit microprocessor
- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce controller temperature
- Effectively reduce the landing distance of the aircraft with programmable brake modes
- Various protection mechanisms such as undervoltage cutoff, overheat protection, and throttle signal loss protection
- Easily programmable with the LED programming card or the transmitter
Technical Specifications
Continuous current: 50A
Peak current: 70A for up to 10 seconds
Input voltage: 3-4S LiPo
BEC: 5A / 5V Switch Mode BEC
Dimensions: 60x25x8 mm
Weight: 36 g.
8. Hobbywing Brushless controller Ezrun MINI28 30A, 2S
Small Brushless Sensorless ESC for Vehicles
- Specifically designed for use in 1:28 mini racing
- Operates with a 2S LiPo battery
- Suitable for 1626 brushless sensorless motors (max. 30A continuous current)
- Compatible with the LCD G2 programming box and the OTA programmer
- BEC: integrated, voltage: 6 V/7.4 V, maximum current: 3.5 A
- Dimensions: 22.7 mm x 14.2 mm x 11.8 mm, weight: 5 g.
9. Hobbywing Regulator SkyWalker 40A 3-4s, 5A UBEC
The Skywalker series is back, and in version 2, it is now even more powerful while still being just as affordable as its predecessor. The Skywalker controllers are primarily designed for RC airplanes and offer everything a flying enthusiast could desire with their features. This includes a built-in 32-bit microprocessor with a clock frequency of up to 96 MHz and programming options that are on par with the previous model. These options include brake type, braking force, cutoff voltage, LiPo cell settings, startup and search modes, as well as timing and active freewheeling.
Of course, these controllers also undergo strict quality assurance by HobbyWing to ensure maximum safety and enjoyment. The Skywalker controllers are particularly well-suited for RTF models and beginners assembling their first model.
Features:
- Compatible with various brushless motors
- Integrated 32-bit microprocessor
- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce controller temperature
- Effectively reduce the landing distance of the aircraft with programmable brake modes
- Various protection mechanisms such as undervoltage cutoff, overheat protection, and throttle signal loss protection
- Easily programmable with the LED programming card or the transmitter.
10. Hobbywing Programming module Multifunction LCD Program Box Pro
This multifunctional programming box is designed for programming HOBBYWING brushless ESCs. Its user-friendly LCD interface makes programming the ESCs quick and easy. With a PC, you can update the ESC firmware and adjust additional ESC parameters online. Furthermore, it is compact, portable, and well-suited for field use. Thanks to the integrated OTA programming function via Bluetooth™, you can now also use this device with iOS devices.
This multifunctional LCD programming box is compatible with the following HOBBYWING products:
- Platinum series of brushless aircraft ESCs
- XeRun & EzRun MAX series (V2.0 and later)
- Platinum and SEAKING PRO series
- This device also works with some ESCs from the QUICRUN series.
- The application range includes all ESCs compatible with the previous version of the LCD programming box and the OTA Bluetooth™ module.
- Whether the programming box is supported depends on the specific ESC model. Please check your ESC's requirements or contact us.
- The USB C software is only for PC users.
- The integrated OTA programmer works for both Apple (iOS) and Android users.
- As a programming device, you can directly use the integrated LCD screen to display, set, and share ESC parameters (Import).
- Connect the ESC to a computer using a USB adapter. Use the USB Link application software on the computer to update the ESC firmware and set parameters.
- The OTA Bluetooth™ module allows you to use the mobile app to adjust ESC parameters, update firmware, and read data (iOS & Android).
- Detect the total voltage of the lithium battery and the individual voltage of each cell.
- ESC interface (Futaba connector) / Power supply interface (Futaba connector).
Product order
See all products