Best Hacker products in the RC motors category
On this page you'll find a ranking of the best Hacker products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Hacker Electric motor A50-12L Glider 355 rpm/V
The unobtrusive nose drive for large glider models weighing up to approximately 14 kg. Easily adjustable shaft. The model can be converted back to a glider in no time. E-flight and glider towing can be alternated. Based on the proven Hacker A50-12L, which has been tested a thousand times. Long free shaft with a diameter of 6 mm, support bearing already included. Ideal as a nose drive for large gliders (e.g., Ventus 2CX, 6 m wingspan, 11.5 kg) with 6S-5000 TopFuel ECO-X and a propeller size of 18.5 x 10.
2. Hacker Airplane model brushless electromo
The new V4 series of A40 brushless motors offers increased efficiency. With a newly designed rear bearing shield and an improved fan, a higher power output is achievable, and the continuous load capacity has been further enhanced.
3. Hacker JETImodel Addcap 1640
AddCAP 1640 has been developed as an add-on capacitor unit to improve the power supply for drive systems with low impedance. This support capacitor should also be used when the cables between the battery and the controller are extended by more than 20 cm. Use one AddCAP 1640 for every 20 cm of extension. Suitable for use with 2.5-6 mm² (14 AWG - 10 AWG) cables. Weight: 27 g Dimensions: 60 x 35 x 24 mm Maximum input voltage: 59 V Capacity: 1640 µF.
4. Hacker Motor mount aluminum A60 and similar
The Hacker Aluminum A60 motor mount is a high-quality accessory specifically designed for front-mounted motors of types A60-M/L and A60-S classic. Weighing 176 grams, this motor mount provides a robust and reliable solution for mounting RC motors. The use of aluminum ensures an optimal combination of stability and low weight, which is crucial for use in remote-controlled models. The motor mount is designed for a precise fit and easy installation, maximizing the efficiency and performance of the motor. This product is ideal for model builders who value quality and durability and want to equip their RC models with a reliable motor mount. The Aluminum A60 motor mount is therefore an excellent choice for anyone looking to outfit their models with a powerful and stable motor.
5. Hacker A20-22 L Competition kv924 brushless motor
The A20-Competition series has been specifically developed for narrow fuselages. These are lightweight, high-performance, enclosed outrunner motors with high torque and efficiency. They do not require a gearbox and are suitable for a wide range of applications. The A20 Competition motors are completely enclosed, meaning there are no rotating motor parts except for the motor shaft. Combined with the rear cable exit, this allows for safe motorization of even the narrowest fuselages. The internal fan, double ball bearings, and interchangeable 5mm shaft make the motor efficient and robust.
The weight-optimized high-end motor A20-22 L Competition kv924, weighing only 81g, is excellent for glider models up to 1.4kg and powered and sport aircraft up to approximately 900g.
6. Hacker Flight model brushless flight regulator
The X-Pro speed controllers are sensorless speed controllers specifically tuned and designed for the Hacker Brushless A motor series. However, due to their various operating modes, these controllers are also excellently suited for other brushless motors. Our special software (optional) for configuring numerous controller setups is delivered with a new USB interface cable. All setup settings of the speed controllers can be read and saved on the computer.
7. Hacker Flight Controller Para RC Mix
The Para-RC Mix has been specifically developed for RC paragliding and remote-controlled skydivers. The special mixing program for altitude and lateral functions allows for realistic control. This mixer moves the pilot's arm fully from top to bottom when the transmitter stick is moved 50% to the right. The left arm moves correspondingly to the left. Additionally, the brake function is included. When the elevator control stick is pulled down from the neutral position (50%), both arms move proportionally from top to bottom. Thus, left, right, and braking are mixed, similar to a delta mixer, but with significantly more control range.
Thanks to the Para-RC Mix, the annoying rubber bands on the transmitter stick, which have been used by paraglider and skydiver pilots, are no longer necessary. The Para-RC Mix is simply connected between the receiver and servos, without requiring any mixer programming in the transmitter.
8. Hacker Speed controller MasterBasic 70SB
The JETI MASTER Basic features a highly efficient controller for driving sensorless brushless motors, with a strong emphasis on reliability and easy configuration of essential parameters through the remote control transmitter. Using the Jeti-Box, nearly every operating parameter can be adjusted individually. Despite the particularly logical and thus very simple operating procedure, handling the MASTER Basic speed controller requires some knowledge.
9. Hacker Speed controller MasterMezon 120 Lite
The MasterMezon 120 Lite speed controller from Hacker is a highly advanced solution for RC motors, suitable for both airplanes and other applications. With its compact design and a weight of just 137 grams, this controller delivers excellent performance without sacrificing mobility. Real-time telemetry via JETI Duplex EX allows for precise monitoring of operating parameters, including battery and BEC voltage, current consumption, and controller temperature. The MasterMezon 120 Lite is equipped with a powerful BEC that supports a wide input voltage range and offers adjustable output voltage. Additionally, wireless programming via DC/DS transmitters enables user-friendly customization of settings. With an intelligent protection mechanism and data logging capabilities, this controller is a reliable choice for demanding RC enthusiasts.
- Real-time telemetry for precise monitoring of operating parameters
- Powerful BEC with adjustable output voltage
- Data logging for comprehensive performance analysis
- Firmware upgrade available for future improvements
- Wireless programming via DC/DS transmitters
- Intelligent protection mechanism for enhanced safety.
10. Hacker A20-12 XL Competition kv1039 brushless motor
The A20-Competition series was specially developed for narrow hulls. They are lightweight, powerful, encapsulated external rotor motors with high torque and efficiency. They do not require a gearbox and are suitable for a wide range of applications. The A20 Competition motors are completely encapsulated, i.e. there are no rotating motor parts apart from the motor shaft! In conjunction with the rear cable outlet, even the narrowest hulls can be safely motorised. The internal fan, the double ball bearings and the replaceable 5 mm shaft make the motor efficient and robust.
The weight-optimised high-end motor A20-12 XL Competition kv1039 with a weight of only 104g is ideal for glider models up to 1.4kg and motor and sports aircraft up to approx. 900g.
10109590.
