Best Tamiya products in the RC car category
On this page you'll find a ranking of the best Tamiya products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Tamiya Lunch Box Monster
Tamiya Lunch Box kit for Wheelie in 1:12 scale. 2WD rear-wheel drive, motor and speed controller included. If you want to have cool wheelie fun, grab the Tamiya Lunch Box Black Edition in 1:12 scale and perform impressive wheelies thanks to the wheelie bar. The original model of this monster on wheels was released in 1987. The current reissue in the Black Edition features a black ABS body and black rims. Chrome parts like the grille and bumper complete the look.
The kit includes all model parts except for electronics, paints, and adhesives. The body needs to be painted by yourself. This allows for various customization options but requires some prior knowledge in model building.
Wheelies are off-road vehicles equipped with large balloon-style tires and increased ground clearance. The unique feature of wheelies is the wheelie bar with a fifth wheel at the rear of the vehicle, which supports it while driving on the rear axle.
Contents:
- ABS body (black)
- Decorative stickers
- Chassis including motor
- Speed controller
- Assembly instructions
To complete the model, you will need an RC system, battery, charger, paints, and adhesives. A suitable selection can be found in the accessories.
General:
- Application area: Off-road vehicle
- Required for completion: Battery (1x), charger, RC system, servo, paints, adhesives, tools
- Model type: Kit
- Difficulty level: Advanced
- Drive: RWD
- Drive type: Electric Brushed
- Environmental conditions: Outdoor use
- Operation: Remote control
- Dimensions: Width 290 mm, scale 1:12, Depth 385 mm
- Vehicle type: Monster Truck
- Material: ABS.
2. Tamiya 1:10 Audi A4 quattro Touring (TT01E)
The Audi A4 Quattro is the reissue of the popular model from the nineties. The model now comes on the proven TT-01E chassis with all-wheel drive. The original was powered by a 2-liter 4-cylinder engine with 296 hp and raced in the STW racing series in 1996, achieving 10 out of 18 wins that season. Emanuele Pirro became the 1996 STW champion early with the #5 Audi.
This 1/10th scale kit model features a detailed, lightweight, and impact-resistant polycarbonate body. It is powered by a TAMIYA TT-01 Type E on-road chassis (electric) with all-wheel drive and independent suspension. A large selection of tuning parts allows the model to be upgraded to a racing machine, matching the performance of the original.
Required accessories include a remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, and paint for the Lexan body. Included in the delivery are the kit model with detailed illustrated assembly instructions, an electronic speed controller, and a 540 electric motor Torque-Tuned.
Warnings: Before you start assembling, you should have read and understood all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions. Tools, including knives, are used when assembling the kit. Care should be taken to avoid injury. If difficulties are encountered during assembly, ask an adult to supervise the work or consult a modeler with RC experience or a specialized dealer. Use tools only for their intended purpose to avoid the risk of injury. If you use paints and/or adhesives (not included in the kit), observe and follow the instructions enclosed with them. Keep the kit away from small children and prevent them from putting any components in their mouths or pulling plastic bags over their heads.
Caution: Not suitable for children under 14 years of age.
3. Tamiya Alfa Romeo Giulia Sprint GTA Club Racer
The Alfa Romeo Giulia Sprint GTA Club Racer is a 1:10 scale radio-controlled car model that replicates the iconic 1965 lightweight race version of the Giulia Sprint GT. Developed by TAMIYA, this assembly kit features a polycarbonate body and detailed stickers to emulate the classic club racers driven by amateur enthusiasts. The model is built on the versatile MB-01 chassis, allowing for customizable drive and engine positions. It is powered by a robust 540 electric motor and includes independent suspension for enhanced performance.
Highlights:
- Customizable MB-01 chassis with adjustable drive and engine positions
- Powered by a 540 electric motor with independent suspension
- Includes detailed polycarbonate body and stickers for an authentic look
4. Tamiya Fiat 131 Abarth Olio Fiat MF-01X
Art. No.: 300058723
Product Name: 1:10 RC Fiat 131 Abarth Olio Fiat MF-01X
The Fiat 131 Abarth Rally was derived from the Fiat 131 Mirafiori and made its debut in 1976. It won rally championship races in 1977 and 1978. The TAMIYA MF-01X chassis features all-wheel drive and grippy rally block tires. With its independent wheel suspension and enclosed drive via a driveshaft, this is the perfect base for the Ford Escort and is ready for RC rally action.
Required accessories: Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger.
5. Tamiya Toyota Celica GT-Four (ST165) (TT-02)
1:10 RC Toyota Celica GT-Four TT-02
Wheelbase: 257 mm
Not suitable for children under 36 months.
4WD kit model
TT-02 chassis
Electronic speed controller
540 torque tuned motor
Polycarbonate body with add-on parts
Cardan drive
Suspension struts
Independent suspension
Tread tyres
Tub frame chassis
Manual.
6. Tamiya Avante
When the TAMIYA Avante was first delivered in 1988, it took the RC world and thousands of fans by storm. Almost a quarter of a century later there is another Avante, the Avante 2011 on a modernised chassis. The 2011 version is limited to 333 units in Germany. The original fibreglass decks have been replaced by 2 mm thick carbon fibre decks, which increases stability. The chassis has been optimised for the installation of modern RC components. The rear shock tower is stronger and now also reinforced with carbon fibre. A cross connection between the right and left arm increases stability. The original steering knuckles have been replaced by strong and lightweight aluminium parts for improved performance. Polycarbonate bodywork, rear wing and side panelling are designed for tough off-road use. The packaging of the 2011 model has the same design as the original version. The "Avante" logo and the rear wing decals are unchanged. The other elements of the decal sheet have the modern Tamiya design.
Kit with detailed assembly instructions
WARNINGS:
You should read and understand all instructions before starting assembly. If a child is assembling the model, a supervising adult should also have read the assembly instructions.
Tools including knives are used when assembling the kit. Special care should be taken to avoid injury.
If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.
Only use tools for their intended purpose. There is a risk of injury if used incorrectly.
If you use paint and/or glue (not included in the kit), observe and follow the instructions supplied with the kit.
Keep the kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads.
Caution! Not suitable for children under 14 years.
Product details
Technical details:
- central drive shaft
- 25T...
7. Tamiya Super Cloud Buster
Art. No.: 300047432
Product Name: 1:10 RC Super Cloud Buster Black Edition
The Cloud Buster is back! The model, known from the 1980s, is now being reissued in the "Black Edition." The body is made of ABS injection molding and is already colored black. The chassis features red components, completing this special version. The Cloud Buster is powered by two 540 electric motors and has permanent all-wheel drive. A key feature is the all-wheel steering via a servo located in the center of the vehicle. With its massive monster truck tires and 55 mm ground clearance, it is highly capable off-road. The kit already includes an electronic speed controller.
Required Accessories:
Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger
4WD monster truck, kit, 2 motors, all-wheel steering, ABS body, Black Edition special model, including electronic speed controller, decoration, instructions
Warning!
Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions. Tools including knives will be used during the assembly of the kit. Extra caution is advised to avoid injuries. If you encounter difficulties during assembly, ask an adult who is supervising or a model builder with RC experience or a specialist retailer for help. Use tools only for their intended purpose. Improper use may result in injury. If you use paints and/or adhesives (not included in the kit), please follow the instructions provided with them. Keep the kit away from small children. Prevent children from putting any parts in their mouths or pulling plastic bags over their heads.
Warning! Not suitable for children under 14 years.
Product Details
-...
8. Tamiya Super Hotshot (2012)
4WD Off-Road RC Model Kit in 1:10 scale. A reissue of the classic buggy from 1986 with modern improvements. Independent suspension with oil-filled shock absorbers. Fully ball-bearing equipped. Silver-painted Lexan body. Gold-coated rims with pin spike tires. Includes a 540 GT-Tuned brushed motor. Buggies typically feature tires with a pronounced off-road tread and a well-tuned chassis, making them ideal models for tough off-road use. The gearboxes are often sealed, protecting them from incoming dirt. Additionally, the shock absorbers usually operate hydraulically and can be tuned with various oils. A brushed motor is particularly appealing due to its simple construction and resulting ease of maintenance. Furthermore, the brushed motor is significantly cheaper to purchase compared to a brushless motor. Kits consist of model components that need to be assembled and may require additional parts. This allows for a variety of configuration options but also requires some prior knowledge in model building. Difficulty level: Beginner. No special prior knowledge in model building is required for this product. The necessary materials for completion and commissioning are usually fully included in the delivery.
9. Tamiya Ford Bronco 2021
Ford Bronco 2021 (CC-02) Tamiya presents the CC-02 chassis (Cross Country) now in the version with a 2021 Ford Bronco body. The CC-02 chassis is inspired by real off-road vehicles and features a frame chassis, cone differentials front and rear, as well as a 4-link suspension. The solid axles at the front and rear make the model particularly capable off-road, and the 4 CVA oil-filled shock absorbers perfectly absorb any bumps. Power is provided by a strong 540 motor, which is mounted behind the front axle. This ensures good weight distribution when tackling rough terrain. Attached to the motor is the gearbox, which transmits power via movable drive shafts to the front and rear axles.
The body features the distinctive design of the modern Ford Bronco and is made of polycarbonate. Additionally, Tamiya has included separate attachment parts and a new roof rack. The light housings can be equipped with 5 mm LEDs - the lighting unit is included in the kit.
10. Tamiya 1/10 RC Hornet EVO
In 2024, Tamiya's Hornet will celebrate its 40th anniversary. This is a perfect reason for Tamiya to commemorate the occasion with a special model – the Hornet EVO! This kit features a redesign of the original model in several areas and includes additional parts. Compared to the standard Hornet, the EVO now boasts independent wheel suspension, a new rear gearbox, ball bearings, and oil-filled shock absorbers. The complete rear axle unit, including the gearbox and suspension, is sourced from the DT-02 chassis. The body is unpainted, and Tamiya has included a slightly revised decal sheet for the EVO version.
Required Accessories:
Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, Tamiya PS paint for polycarbonate bodies.
2WD kit model, electronic speed controller, 540 motor, unpainted polycarbonate body, independent wheel suspension, oil-filled shock absorbers, profile tires, instructions.
Warning!
Before you begin assembly, make sure you have read and understood all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions. Tools, including knives, will be used during the assembly of the kit. Extra caution is advised to avoid injuries. If difficulties arise during assembly, consult a supervising adult or an experienced RC model builder or retailer. Use tools only for their intended purpose. Improper use may result in injury. If you use paints and/or adhesives (not included in the kit), please follow the instructions provided with them. Keep the kit away from small children. Prevent children from putting any parts in their mouths or pulling plastic bags over their heads.
Warning! Not suitable for children under 14 years.
Product Details:
- 1:10 scale kit model
- Special edition for the 40th anniversary.
