Best Multiplex products in the RC aircrafts category
On this page you'll find a ranking of the best Multiplex products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Multiplex Extra 330 LX
The Extra 330LX is the most uncompromising foam aerobatic model and is in no way inferior to its wooden brothers. The Extra 330LX is the first foam model in which the high-quality servos of the Hitec D series have been installed. These are characterized by high precision (32bit resolution), high actuating force (4kg x cm) and the proven soft start. The drive system has been redesigned and a special high-efficiency propeller has been developed especially for the Extra. As you can see, only the highest quality RC components are used in the Extra 330LX. This guarantees you the best flight performance and puts a smile on your face every time you take off.
2. Multiplex loopi free flight model
It looks like our successful Fox model, but can do more than its predecessor!Our Loopi flies rapid loops or long glides, depending on how you insert the tailplane into the fuselage. Made of crash-resistant particle foam, the Loopi is almost "indestructible"!The model comes in an attractive (especially for children) sturdy cardboard box and is thus well protected during transport. This gives you the option of stacking the models or hanging them on a perforated wall. 1-01545.
3. Multiplex Easy Glider4 (kit without drive, without servos)
The good-natured and robust electric glider EasyGlider 4 with ailerons in the 4th generation. Its particular strength is its ability to easily utilise thermals and updrafts with a low basic speed in gliding flight. According to the motto: evolution instead of revolution, this ELAPOR® classic has been revised and is being launched on the market as 100% "Made in Germany". The MULTIPLEX EasyGlider is cult and unrivalled in its field. That's why the EasyGlider 4 had to remain a genuine MULTIPLEX EasyGlider.
Wings with super-light and high-strength GRP square spar
Stiff fuselage thanks to M-Space technology
Removable vertical and horizontal stabilisers - easy transport
RTF version with glued-on landing skid
Modern decal sheet with landing skid
Efficient and lightweight ROXXY drive
The EasyGlider 4 is a fun model that also cuts a fine figure in aerobatics (loops, rolls, inverted flight, turns, ...).
Optimised gliding characteristics
Cranking out thermals made easy thanks to very low basic speed
Powerful, efficient brushless drive with S-BEC controller for rapid climbs and long flight times
Super robust thanks to ELAPOR® construction
Folding propeller with elegant plastic spinner
Landing aid by raising the ailerons
Easy to transport thanks to detachable wings, rudder and tailplane
Plenty of space in the fuselage allows the use of different battery sizes
Convenient battery change thanks to the coloured canopy
The product EASY GLIDER 4 BAUSATZ OHNE ANTRIEB OHNE from MULTIPLEX in the category Electric gliders has a wingspan of 1800 and a weight of 1100. The model is controlled using the H,S,Q,M functions. The model is designed as an ARF - ALMOST READY TO FLY. Multiplex recommend a 3S LiXX battery for this electric model.
4. Multiplex RR TwinStar ND 1420mm
The TwinStar ND will inspire you! We have given our popular TwinStar a complete overhaul and a new coat of paint. The elegant design by Aircraftstudiodesign® underlines the timeless lines of this beautiful model. Enjoy the power and the sound of two powerful engines during deep flybys. A fascinating experience! It gives beginners a quick sense of achievement with its extremely good-natured flight characteristics. As an aerobatic trainer the very manoeuvrable TwinStar ND is convincing in: Rolls, loops, stunts and precise target landings. Due to its favourable design, the TwinStar ND is excellently suited as a camera carrier and as an FPV model. The model with its wingspan of 1,420 mm offers ideal transport possibilities thanks to its quickly separable wings. So it fits in every trunk. The model, which is manufactured in Germany, is typically MULTIPLEX made from ELAPOR®, a special foam material in premium quality. With the 3-S drive in the RR version, the TwinStar ND climbs steeply and is steered safely into its path thanks to the standard MULTIPLEX servos. Optional: float kit (# 733061) for landing on water, but also on snow and ice RR scope of supply: - ELAPOR® model 95% ready-built - including 2x Permax BL-O 2830-1100 drive motors, MULTIcont BL-30 2-in-1 speed controller - 8x5 propellers with aluminium spinners, - 4 MULTIPLEX Tiny-S servos, complete set of cables for drive and servos (can be separated on the wing by means of connectors) - Y-adapter - detailed instructions. - Decal sheet must still be applied.
5. Multiplex RR FunCub NG 1410mm high wing ARTF green
"NG" stands for Next Generation and that's what it really is -and thus the successor to our proven and very popular FunCub. The flight characteristics and the handling could be improved again. The FUNCUB NG is extremely docile, impresses with its lightness, is nevertheless very maneuverable and can also be used for aerobatics and aerotow. Even knife-edge flying and torquing is possible with it, the ROXXY motor installed as standard offers sufficient power reserves for this. The FUNCUB NG is ideal for beginner training and inspires young and old alike. Like its predecessor, the FUNCUB NG has a 1.4m wingspan and separable wings. What is new is that the wings are strutted. The model also flies without struts, but for aerobatics it is recommended to mount them. Thanks to the large wheels and the new landing gear, the FUNCUB, like its little sister, the FunnyCub, can be launched and landed on almost any terrain without hesitation. The internal fuselage structure has been completely redesigned, so the motor is now installed by rear panel mounting, and the force absorption of the landing gear, motor mount and battery mount is done centrally via a GRP square tube. - Divisible and braced wings, easy to attach with the included multitool - Stable landing gear made of welded steel wires - Tow release can be retrofitted as an option - Precise direct linkage of the control surfaces - Easy battery change through the canopy - HiTEC servos on all control surfaces (HS-65HB on HR/SR, HS-55+ on QR) Required: - LiPo 3S 2600 mAh 40C AN-216333 - Receiver RX-7-DR light 2.4 GHz M-LINK Multiplex AN-79063 - Zacki2 ELAPOR 20g superglue AN-269200 Technical data: Wingspan: 1410mm Length: 1050mm Flight weight: 1380g Control channels: 7-8.
6. Multiplex RR AcroMaster Pro
The AcroMaster PRO is the logical further development of our popular Acromaster. It was important to us during development to improve the model, but not to fundamentally change it. Thus, the AcroMaster PRO's appearance is familiar at first glance, but still completely new and fresh. The improvements in the overview: - New motor mount and a more stable power input into the fuselage - New landing gear made of anodized aluminum, new landing gear mount, new wheel shoes with larger wheels - New battery mount with Velcro straps - New wing lock - Servos & Bowden cables now inside - Very powerful and efficient ROXXY motor and speed controller - Hitec HS-82MG servos for elevator and rudder (metal gear) - Hitec HS-65HB servos for the ailerons (carbonite gearbox) - Canopy ready painted - Wingstabi mounting surface integrated in the fuselage - New chic decal sheet (not included with the RR model) With all these changes, the AcroMaster PRO is as good as never before and offers the ideal basis for relaxed flying and training of aerobatic maneuvers due to its good-natured flight characteristics and its versatility in aerobatics. Scope of delivery: - ELAPOR® model almost completely built - without decor - including drive motor ROXXY C35-48-990kv - controller ROXXY BL-Control 755 S-BEC - propeller 12x6 - 2x servos HS-82MG - 2x servo HS-65HB - instructions Required flight battery 3S 2600mhA.
7. Multiplex FunJet 2
Making something good even better is always a challenge. In its time, the FunJet was already the best flying Elapor pressurized propeller jet on the market. With the FunJet 2, there is now a further optimized version on the cutting edge of technology. A highly efficient Roxxy 3S engine, the new canopy shape and the new high quality design make the model even more attractive. The speed with the components we recommend is about 160 Km/h. The enormous speed and the excellent low-speed flight and landing characteristics particularly distinguish this model, as it can always be controlled uncritically and precisely.
The big difference to its faster brother, the FunJet Ultra 2 lies in the lower weight and the associated very uncritical hand launch characteristics. This makes the FunJet 2 the ideal jet when perfect all-round characteristics and easy handling are required. The sound of the model conveys real speed feeling at an affordable price. Due to its size, the FunJet fits in any trunk and should also always be carried along for daily fun.
8. Multiplex slick x360 indoor edition
The Slick X360 has set new standards in the aerobatics scene in recent seasons, successfully proving this at numerous competitions. Developed and tested by well-known competition pilots, MULTIPLEX has created a model that is absolutely convincing with its flight characteristics. The Slick is very robustly built and forgives almost every mistake. The MULTIPLEX Slick X360 is the perfect entry into the world of 3D aerobatics for indoor and outdoor use.Required accessories:ROXXY EVO LiPo 2 - 450B 30C m/w BID-Chip; 3,4 Wh (#1-00016)Indoor Servo Set 2xHS-40 & 1xHS-65HB (#1-01009)Drive Set V2 Extra 330 SC Indoor / FunnyCub (#1-01026)O-Rings for Propeller Mounting Shockies 5 pcs (#224386)Propeller Adapter Ring Indoor (2 pcs.) (#224387) 1-01631.
9. Multiplex Funray RC glider model Baus
The MULTIPLEX FUNRAY marks the beginning of a new era for ELAPOR® models!
The kit model of this elegant 4-flap electric glider inspires with dynamic glider aerobatics. The FUNRAY has excellent all-round characteristics, proves itself equally well on slopes and in thermals. After a steep descent with butterfly, landing with pinpoint accuracy is child's play. The FUNRAY convinces with incredible speed and precision in aerobatic maneuvers. There has never been anything like this in ELAPOR® glider models until now! This performance is made possible by its modern hybrid construction in a composite of carbon fiber, stainless steel, aluminum, plastic and the special ELAPOR® construction foam.
Designed and Made in Germany!.
10. Multiplex FunnyStar 850mm ARTF
Our new Funnystar is the perfect entry into the world of model flying. It is suitable for outdoor use as well as for indoor use (gymnasiums & sports halls). Due to the use of crash-resistant material (Epp), the Funnystar can withstand a lot. This is appreciated by beginners as well as high-spirited professionals. The construction of the model is kept as simple as possible and can therefore be easily mastered even by beginners. The flight characteristics are very uncomplicated, the model flies harmoniously and follows the control commands directly. A special feature of the Funnystar is its wing, which can be removed without tools, this feature allows easy transport and space-saving storage. The model provides a lot of fun for beginners and professionals alike. Scope of delivery: Color printed EPP parts for fuselage, wings and tailplane. Wooden spars for the wing. All plastic small and linkage parts required for assembly. Detailed instructions. BK+ consisting of: Kit + 2 MS8510 MG servos + drive kit.
