Amewi Jet Star V2 65mm electric motor jet model PNP
Jet
On this page you'll find a ranking of the best Amewi products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
Description: The further development of our popular Jetstar (24067) in cooperation with Amewi and some top pilots! In contrast to the Jetstar V1, a completely newly developed 11 blade impeller with a 60A regulator is used here. The number of cells has been increased from 3S to 4S LiPo (approx. 1800 - 2200mAh) and the achievable speed has thus been significantly increased. The model is super easy to launch directly from the hand or with the included rigid landing gear from short grass or concrete. The sound of the new impeller is extremely beautiful and resembles a quiet turbine! The elevator has been changed here from pendulum tail to flaps (normal elevator), which increases flight stability at high speeds. In addition, metal gear servos are installed on height and side, which provides significantly more holding power at high speeds. The orange / white color scheme offers good visibility in the sky and the model can be seen in this design quite as a sport jet with aerobatic characteristics. The slow flight characteristics of this model are almost perfect and a stall knows this model almost not. Thus, the Jetstar V2 is also suitable for ambitious beginners. Features: - completely new development - top flight characteristics - easy to start, no sagging after takeoff - super sound from the impeller - very high performance - vertical climb possible - fully aerobatic capable - very high roll rate with full rudder deflections - very high speed possible - very good slow flight characteristics - Hobbywing controller - 11 - blade impeller - MG servos height / side - very high material quality Technical data: - Wingspan: 800mm - Length: 910mm - Weight without battery and receiver: 1000gr - Material: EP (hard pressed foam) - Model layout: PNP (incl. motor, ESC, servos) Scope of delivery: - Model Jetstar V2 - Motor brushless, ESC Hobbywing 60A, Servos - Manual is still needed: - Transmitter min. 4 channel - Battery 4S LiPo 1800 - 2200mAh 14,8V - Charger Recommendation from Amewi: glue the tailplane, rudder and wing to the model with foam glue or resin. This gives additional security to the screw connections and more strength at full throttle! Due to the small and handy size, the model can be easily transported assembled camouflage.
Amewi Jet Star V2 65mm electric motor jet model PNP
Jet
This concept offers enormous flight times thanks to battery capacity up to 10,000 mAh (flight times up to 70min). A 600TVL FPV camera and a 200mw video transmitter are already built in ready to fly. Simply pair this fantastic model with video goggles or a monitor and experience your flight from the pilot's point of view. The system also has a mount for e.g. GoPro or similar cameras. Thus, extended video flights are easily possible and thanks to the long flight time, large areas (e.g. coastal sections, mountains or lakes) can be filmed uniquely. The good-natured flight characteristics of this model invite even beginners with little flying experience to enjoy this great model. Only a transmitter with delta mixer, a receiver and a flight battery from 2200mAh 3S 11.1V - 10,000mAh 3S 11.1V are still necessary and then you can go. This model can be converted into a true racer in just a few easy steps. Just take out the middle part and put the wings back together, plug in the motor incl. bracket and you have a race wing with a high speed range.
Aircraft type: Impeller jet, Type of drive: Electric brushless, Model design: PNP (Plug and Play), Material: EPO, Required for completion: RC system, Battery (1x), Charger, Detail color: Red.
A fun, interactive drone that can be controlled by hand movements and approach rather than by a standard remote control. The drone is protected by a circumferential cage made of soft and flexible ABS plastic (therefore no risk of injury for the pilots) - so damages are almost completely excluded. Two optical sensors automatically detect obstacles and the drone flies around them as if by magic. A mega fun for young and old.the model is started simply by throwing it slightly into the air. The model then floats on the spot and the position is stabilized by the electronics. Flashing LED'S provide a super atmosphere in the dark. It's showtime. By approaching the model the flight path changes now. So the drone can even be controlled by several people through the room. Throwing balls was yesterday - drone moving is today. The trend of the year.
Suitable for beginners and advanced pilots. Switchable on and off 6 axis gyro. Ready to fly out of the box. You receive a complete package with a pre-built model as well as a compatible transmitter - unpack and get started. Easy to use, this type is ideal for entry into the world of model sports.
Aircraft type: Warbird, Type of drive: Electric brushless, Model design: PNP (Plug and Play), Required for completion: Tools, Battery (1x), RC system, Charger, Color: Grey, Red, Scale model: Yes.
Amewi Maule M7, red RC beginner model aeroplane kit 510mm.
Amewi RC aeroplane Maule M7 Brushless 510MM 4-channel 3D/6G Red
Multi motor
Aircraft type: Flying wing, Type of drive: Electric brushless, Model design: PNP (Plug and Play), Material: EPO, Required for completion: RC system, Battery (1x), Charger, Detail colour: Red.
Aircraft type: Warbird, Type of drive: Electric brushless, Model design: RTF (Ready to Fly), Material: EPS, Required for completion: Batteries for transmitter, Detail colour: Silver, Red.
Replica of the Shenyang J-11 or Jian-11 - a single-seat, twin-engine fighter from China. This was originally a licensed variant of the Russian Su-27SK, but the newer version, the J-11B, has been completely redeveloped. The model impresses with its flight performance and fully automatic attitude stabilization (gyro), which gives very pleasant flight characteristics and makes it fully suitable for beginners. Since the J-11 replica is delivered RTF (Ready to Fly), no more screwing, drilling or gluing is required before takeoff. The built-in gyro immediately takes over flight stabilization in the air and the pilot can focus on actually controlling the model. As soon as no more control input is made, the model goes back into horizontal straight flight. By pressing a button on the transmitter, the gyro can be switched off, e.g. for loops (stabilized max. 15 - 20°, climb flight possible). If, however, the flight attitude should become uncertain, the gyro switch serves as a lifeline. Thus, immediately after pressing the button, the model is automatically brought back into a stable flight attitude. The robust, impact-resistant EPP material also allows for harder crashes and landings. It is easy to repair or glue.