Best selling PC cases from Montech
This page always stays fresh and updates automatically.
1. Montech Xr
The XR from Montech is a midi tower with a very elegant front I/O together with a design that resembles wood grain. It is also optimised for airflow and comes with a total of three integrated, powerful ARGB PWM fans ex works. With this, the manufacturer sets the basis for every gaming computer that focusses on cooling performance. The case consists of a sturdy steel construction with a tempered glass side panel and front. The lid, the side of the power supply compartment and the rear side panel are fitted with a fine mesh. The high air permeability benefits the cooling of your components.
Both advocates of air cooling and water cooling enthusiasts will get their money's worth with this case: the Montech XR offers options for installing a total of nine fans. Instead of on the front, two powerful 120 mm fans are pre-installed on the side. Three 120 mm fans can be installed on the lower power supply cover. A 120 mm fan is also pre-installed at the rear. All three of the Montech fans can be controlled via PWM signal and have ARGB lighting. Three 120 mm or two 140 mm fans can be retrofitted in the lid. The height of the CPU cooler is limited to a maximum of 175 mm.
Montech has also made provisions for fans of AiOs or custom water cooling systems. Up to 240 mm radiators can be mounted on the side. There is space on the lid for a radiator up to 360 mm in size. Thanks to the generous mesh surfaces, plenty of air can get in and out of the housing. To ensure the long-term effectiveness of your cooling and simplify the cleaning of your fans, additional dust filters are attached to the side and base. You can easily remove, clean and replace them.
The interior offers an exceptional amount of space for powerful hardware, for example for ATX mainboards and high-performance gaming graphics cards up to 420 mm in length. The graphics card can also be installed vertically using the optional PCI bracket from Montech. Two 2.5-inch SSDs can be attached to the rear of the mainboard tray in the corresponding brackets.
What our customers think
Pro
- 3 included 120mm ARGB PWM fans (daisy chain possible)
- buzzer included
- many accessories
Contra
- short fan cable to reach mainboard connector
- nothing found
- no screwdriver included
2. Montech KING 95 Pro Rose Gold
The Montech Tower Case is a computer chassis designed for the assembly and housing of desktop PC components, bringing an elegant touch to any setup with its distinctive rose gold finish. Made from durable materials, it ensures reliable protection for internal hardware while maintaining a sleek appearance. This tower case supports standard ATX motherboards and offers ample space for multiple storage drives, expansion cards, and cooling solutions, with dimensions of approximately 50 cm in height, 20 cm in width, and 45 cm in depth, though exact measurements may vary. It features several front ports such as USB and audio jacks for convenient connectivity. The design prioritizes airflow with strategically placed ventilation openings and optional fan mounts to maintain optimal operating temperatures and enhance component longevity. Tool-free installation features make assembly easy, making it accessible for both beginners and experienced builders. The interior is optimized for cable management to reduce clutter and improve system efficiency. Compatible with a range of power supplies and graphics cards, it suits various computer needs, from everyday use to gaming or professional applications. The rose gold color adds a modern aesthetic that complements different desk environments without being intrusive. Overall, this case combines functionality with style, providing a solid foundation for a custom PC build.
3. Montech King 95 Pro
Step into the future with the KING series from Montech – the epitome of high-quality materials and cutting-edge design. KING is the result of our relentless pursuit of quality and innovation, seamlessly combining premium materials with distinctive aesthetics. Whether you are a forward-thinking gamer or a visionary developer striving for excellence, the KING series is designed to meet and exceed all your technical desires.
This collection embodies our unwavering commitment to excellence. The KING 95, our flagship product, stands as a symbol of our steadfast dedication to quality. With its captivating exterior design and groundbreaking features, the KING series promises to immerse you in a world full of technology-driven excitement.
What our customers think
Pro
- Fan included and pre-installed
- Plenty of space also for 280 or 360 AiO
- Additional fans/rgb can be connected
Contra
- Weight, case alone weighs just under 15kg
- The fans are slightly louder than be Quiet or Arctic.
- The housing is no lightweight
4. Montech AIR 903 MAX B
Introducing the Montech AIR 903 series – the ultimate upgrade for PC enthusiasts. It offers outstanding aesthetics, unparalleled airflow, meticulous attention to detail, and exceptional compatibility. Experience the innovative AIR 903 case with a metal front panel and an impressive ventilation rate of 51%.
5. Montech Air 903 Base
Introducing the Montech AIR 903 series – the ultimate upgrade for PC enthusiasts. It offers outstanding aesthetics, unparalleled airflow, meticulous attention to detail, and exceptional compatibility.
6. Montech X3
Main Features
Design
Form Factor: Midi Tower
Type: PC
Product Color: Black
Supported Motherboards
Form Factors: ATX, micro ATX, Mini-ITX
Number of 3.5" Expansion Slots: 2
Number of 2.5" Expansion Slots: 2
Number of Expansion Slots: 7
Side Window: Yes
Suitable for Gaming: Yes
Lighting: Yes
Lighting Colors: Multi
Lighting Location: Rear, Front, Top
Tempered Glass Panels: Yes
Anti-Dust Filter: Yes
RGB Control Button: Yes
Maximum CPU Cooler Height: 16 cm
Maximum Graphics Card Length: 30.5 cm
Maximum PSU Length: 16 cm
Power Supply
Power Supply Included: No
Number of Power Supply Units: 1
Connections and Interfaces
Number of USB 2.0 Ports: 2
USB 3.2 Gen 1 (3.1 Gen 1) Type A Ports: 1
Audio Ports: Yes
Audio Output: Yes
Cooling
Installed Fans (Front): 3x 140 mm
Maximum Supported Front Fans: 3
Supported Front Fan Diameters: 120, 140 mm
Installed Fans (Rear): 1x 120 mm
Maximum Supported Rear Fans: 1
Supported Rear Fan Diameter: 120 mm
Installed Fans (Top): 1x 120 mm
Maximum Supported Top Fans: 2
Supported Fan Diameter (Top): 120 mm
Maximum Supported Bottom Fans: 2
Supported Bottom Fan Diameter: 120 mm
Storage Medium
Supported Hard Disk Drive Sizes: 2.5, 3.5" HDD/SSD Combo Case: Yes
SSD Form Factor: 2.5"
Maximum Supported Number of HDDs: 2
Weight and Dimensions
Width: 210 mm
Depth: 370 mm
Height: 480 mm
Weight: 5.42 kg
Packaging Data
Packaging Width: 265 mm
Packaging Depth: 530 mm
Packaging Height: 425 mm
Package Weight: 6.28 kg.
7. Montech KING 45 PRO Black
The Montech King 45 Pro Black is a mid-tower computer case designed for modern PC components with efficient airflow and cable management. This case features a black exterior with a tempered glass side panel that provides a clear view of internal components while maintaining structural integrity. The chassis measures approximately 50 cm in height, 21 cm in width, and 45 cm in depth, offering ample space for ATX, Micro-ATX, and Mini-ITX motherboards. It supports graphics cards up to 35 cm in length and CPU coolers up to 16.5 cm in height, with room for multiple storage drives, including 2.5-inch and 3.5-inch bays. The front panel includes USB 3.0 ports, audio jacks, and power controls in a convenient layout. Ventilation is optimized with several fan mounting points for 120 mm and 140 mm fans, complemented by dust filters at the air intake areas to maintain clean internal airflow. The back features standard expansion slots and cable pass-throughs for organized cable management behind the motherboard tray. Made of steel and tempered glass, this case combines durability with aesthetic appeal, making it suitable for building reliable desktop systems. The interior layout prioritizes component compatibility and thermal performance, with tool-free installation mechanisms for drives and expansion cards. The power supply is mounted at the bottom with a dedicated ventilation area and dust filter. Overall, this case meets the expectations of builders looking for a functional case with a transparent side panel and efficient cooling options.
8. Montech Sky Two Gx
To provide a solution for the increasing TDP of high-end hardware and meet the expectations of top gamers, Montech has decided to create a case with extreme airflow and enhanced compatibility. It accommodates up to 11 fans while maintaining the original SKY TWO aesthetics. Montech has made three improvements in this special edition: a raised top, improved cable management, and a refined structure. The metal mesh front panel of the SKY TWO GX has a porosity of up to 51%, providing dust protection as well. The front panel can be easily removed with a quick-release mechanism. The SKY TWO GX is equipped at the front with 3 x AX140 ARGB-PWM fans, which ensure a combination of high airflow and low noise levels. The fan speed is adjustable via the PWM function, allowing synchronization with the motherboard for a personalized lighting display. The GX adopts the SKY TWO design and continues the lower mesh structure from the front panel to the power supply chamber to ensure comprehensive airflow. A simplified disassembly step involves removing two rear screws to release the mesh. All 7 PCIe slot covers are removable for the vertical Montech graphics card mounting kit. It's time to enhance the thermal performance and aesthetics of your GPU.
9. Montech Air 100
The AIR 100 series is the first micro-ATX case in Montech's highly acclaimed AIR series of PCs. Its smaller dimensions make it easier to transport and take up much less space.
Despite its smaller size, the AIR 100 does not compromise on achieving the best possible cooling performance. The expandability and anti-dust features also meet the standards of Montech's AIR series. Combined with a clean, minimalist design, the AIR 100 offers PC users a smooth and elegant experience, while also delivering high performance.
The ultra-thin mesh front panel not only ensures a continuous flow of cool air into the case but also acts as a dust filter. Thanks to the intelligent design with a quick-release mechanism, the ultra-fine mesh can be easily and tool-free removed for cleaning.
What our customers think
Pro
- Lots of airflow
- Everything fitted straight in
- Beautiful finish
10. Montech King 95
Step into the future with Montech's KING series – the epitome of high-quality materials and cutting-edge design. KING is the result of our relentless pursuit of quality and innovation, seamlessly combining premium materials with distinctive aesthetics. Whether you are a forward-thinking gamer or a visionary developer striving for excellence, the KING series is designed to meet and exceed all your technical desires.
This collection embodies our unwavering commitment to excellence. The KING 95, our flagship product, stands as a symbol of our steadfast dedication to quality. With its captivating exterior design and groundbreaking features, the KING series promises to immerse you in a world full of technology-driven excitement.
Product order
See all products