Network switches
CHF721.01
Ixxat 1.01.0067.44300 CAN-CR220 ISO 11898-2 CAN repeater with 4 kV insulation voltage 1 pc.
Best Ixxat products in the Network switches category
On this page you'll find a ranking of the best Ixxat products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Ixxat 1.01.0067.44300 CAN-CR220 ISO 11898-2 CAN repeater with 4 kV insulation voltage 1 pc.
The CAN-CR220 repeater with two CAN channels serves to provide galvanic isolation between two segments of a CAN network and offers a very high galvanic isolation of 3 kV, making it suitable for use in medical applications. It can be used to increase the load capacity of the CAN bus with nodes, for the physical coupling of CAN bus systems, or to insert galvanic isolation. The CAN repeater provides the necessary flexibility to optimize the structure of CAN networks and frees CAN networks from the limitations of bus structure. It isolates a faulty segment from the rest of the network, allowing the remaining network to continue functioning. Once the fault is resolved, the segment is automatically reconnected to the network. The galvanic isolation is implemented for both the CAN segments and the power supply, reliably enhancing the protection of the device against damage to the electronics caused by voltage spikes. The CAN-CR220 is tested according to DIN/EN 50178.
2. Ixxat CAN@net NT 200 CAN-Ethernet Gateway
The CAN@net NT is offered as the CAN@net NT 200 with two classic CAN channels. The devices feature three operating modes and can be used as both a PC interface and as a bridge and gateway.
In gateway mode, the CAN@net NT can be accessed from different operating systems (e.g., Windows, Linux, VxWorks, or QNX) and from embedded systems. This is done via a standard TCP/IP socket and a simple ASCII protocol. Thus, the CAN@net NT provides a simple and flexible access to CAN systems over a LAN or the Internet as a CAN-Ethernet gateway.
With the included VCI driver for Windows, the CAN@net NT can be operated like all IXXAT CAN PC interface cards. Therefore, all VCI-based IXXAT tools, such as canAnalyser, can be used with the CAN@net NT, as well as customer-specific applications developed based on the VCI driver. The VCI CAN driver allows communication with up to 128 CAN@net NT devices simultaneously.
By using two CAN@net NT 200 devices, a CAN-Ethernet-CAN bridge can be realized, connecting up to 2 independent CAN channels per device. The bridge enables the exchange of CAN messages between CAN systems via TCP/IP over long distances, utilizing existing Ethernet infrastructures. This segmentation of CAN systems also increases the reliability and fault tolerance of the overall system.
With the help of mapping tables, the message exchange between all channels can be configured very flexibly. Filtering and transformation rules can be applied to the CAN messages, thereby reducing the bus load in the individual networks, as only messages that are of interest to the other network are transmitted.
3. Ixxat CAN-CR220 ISO 11898-2 CAN repeater with 4 kV isolation voltage
CAN-CR220
The CAN-CR220 is used for galvanic isolation between two segments of a CAN network and offers a particularly high isolation voltage of 4 kV. It is therefore suitable for use in medical applications, for example. The repeater disconnects a faulty segment from the rest of the network, allowing the remaining network to continue operating. Once the fault is resolved, the segment is automatically reconnected to the network. The galvanic isolation is implemented for both the CAN segments and the power supply. The CAN-CR220 is tested according to DIN/EN 50178.
4. Ixxat CANbridge NT420 Canbridge 9 V/DC, 12 V/DC, 24 V/DC, 36 V/DC
The CANbridge NT 420 is a CAN/CAN bridge/gateway with CAN FD support. It can be used to connect up to four CAN systems or two CAN FD networks and control the message exchange by applying rules and functions to these messages. Additionally, it allows for easy coupling of CAN and CAN FD networks, conversion of networks with different bit rates or frame formats (11/29-bit identifiers), as well as manipulation, evaluation, filtering, and forwarding of CAN messages. The CANbridge NT 420 features a powerful microcontroller that can perform message filtering, ID translation, and data multiplexing (e.g., required for converting CAN FD to CAN messages) and can also handle bursts of higher data rates without message loss. The integrated galvanic isolation reliably enhances the protection of the device from damage to the electronics caused by voltage spikes. In summary, these features provide increased system efficiency, improved communication between devices, extended compatibility, and faster, more reliable data processing in CAN and CAN FD systems.
5. Ixxat CANbridge NT 200, Configurable Bridge/Router for CAN
This device allows for the easy coupling of networks, including those with different bit rates or frame formats (11/29-bit identifiers). The bridges/routers are equipped with a powerful microcontroller that can perform message filtering, ID translation, and data multiplexing even during bursts and at high data rates without message loss.
Features:
- Up to two CAN channels in one device
- Powerful filtering, ID translation, data mapping, and multiplexing functionality
- Easy configuration with a Windows-based tool
Benefits:
- Simple coupling of CAN systems and devices
- Cost savings through straightforward wiring
- Increased system expansion and the use of tree/star topologies
- Higher system reliability
- Protection of segments through galvanic isolation
Operating Principle:
Unlike a CAN repeater, which only translates electrical signals, the bridge/router fully receives messages and then sends them to the other network while considering filtering, translation, mapping, and multiplexing rules (store-and-forward principle). Using mapping tables, message exchange between all four networks is possible. With the help of filtering and translation rules, CAN messages can be filtered or modified. This reduces bus load in the individual networks, as only messages of interest to the other network are transmitted. Data multiplexing allows for the mapping of, for example, CAN data onto multiple standard CAN messages.
Configuration:
The configuration of the CANbridge NT can be easily done via USB using the supplied Windows-based configuration tool. The tool allows for simple configuration of filtering, mapping, multiplexer, or translation rules without requiring programming knowledge.
6. Ixxat 1.01.0261.02106 CME/PN Profinet-CANopen 1 pc.
The Ixxat CME/PN is a powerful gateway for the easy connection of CANopen devices and networks to PROFINET systems. It supports bidirectional data exchange between PROFINET and CANopen, ensuring smooth and reliable system communication. The configuration of the CME/PN is simple and straightforward, using the provided Ixxat configuration tool. It can be performed via USB or through the Ethernet interface with remote access, making system maintenance and management extremely convenient. For successful integration, configuration support and extensive support services are available.
7. Ixxat simplyCAN active USB adapter
With the simplyCAN, HMS offers a highly affordable PC-CAN adapter that can be quickly and easily integrated into customer applications without driver installation and through an intuitively usable API interface. simplyCAN is therefore the ideal foundation for customer-specific tools for the diagnosis, configuration, and commissioning of devices and systems with a CAN connection.
Easy commissioning: Under Windows 10 and Linux, no driver installation is required for the operation of the hardware, as the adapter is automatically recognized as a serial USB-COM interface. Customer-specific applications based on simplyCAN, such as for diagnosis, configuration, or commissioning, can thus be used directly without driver installation. The connection to the customer application is made using a few simple functions provided through a compact API.
Comparison of different USB-CAN interfaces: HMS offers additional USB interfaces for CAN under the Ixxat brand. These include variants with one or two CAN channels, support for CAN FD and LIN, as well as an embedded variant for implementation in customer devices.
