Best selling Network cards from Chelsio

On this page you'll find a ranking of the best Chelsio products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Chelsio T520-CR - Network adapter - PCIe 3.0 x8

Chelsio’s T520-CR is a dual port 10 Gigabit Ethernet Unified Wire adapter with a PCI Express 3 host bus interface, optimized for cloud computing, HPC, virtualization, storage, and other data center applications.

The fifth-generation (T5) technology from Chelsio provides the highest 10GbE performance available and dramatically lowers host-system CPU communications overhead with on-board hardware that off-loads TCP/IP, iSCSI, FCoE, and iWARP RDMA processing from its host system. The T520-CR frees up host CPU cycles for useful applications. The system achieves increased bandwidth, lower latency, and uses less power.
 

Chelsio T520-CR - Network adapter - PCIe 3.0 x8 (PCI Express 3.0 x8)
Network cards
CHF569.–

Chelsio T520-CR - Network adapter - PCIe 3.0 x8

PCI Express 3.0 x8

2. Chelsio T580-LP-CR - Network adapter - PCIe 3.0 x8 - 40 Gigabit QSFP+ x 2

The Chelsio T580-LP-CR network adapter is a powerful plug-in card designed for use in modern network infrastructures. With a PCI Express 3.0 x8 interface, this adapter offers an impressive data transfer rate of up to 40 gigabits per second. It is equipped with two QSFP+ ports that enable flexible and scalable network connections. The T580-LP-CR supports various network protocols, including Ethernet and Fibre Channel over Ethernet (FCoE), making it a versatile solution for different applications. Its compatibility with common operating systems, including Windows 7, ensures easy integration into existing systems. The adapter is ideal for environments with high bandwidth requirements, such as data centers or enterprise networks, and provides reliable performance for data-intensive applications.

- Supports Ethernet and Fibre Channel over Ethernet (FCoE) protocols
- Maximum data transfer rate of 40 Gbit/s
- Two QSFP+ ports for flexible network connections
- Compatible with PCI Express 3.0 x8 interface
- Certified to multiple IEEE standards for network protocols.
 

Chelsio T580-LP-CR - Network adapter - PCIe 3.0 x8 - 40 Gigabit QSFP+ x 2 (PCI-E x8)
Network cards
CHF589.–

Chelsio T580-LP-CR - Network adapter - PCIe 3.0 x8 - 40 Gigabit QSFP+ x 2

PCI-E x8

3. Chelsio T580-CR Network Card Dual-Port QSFP+ 40 Gbit T580-CR

Chelsio’s T580-CR is a dual port 40 Gigabit Ethernet Unified Wire adapter with PCI Express 3 host bus interface, optimized for cloud computing, HPC, virtualization, storage, and other data center applications.

The fifth-generation (T5) technology from Chelsio provides the highest 40GbE performance available and dramatically lowers host-system CPU communications overhead with on-board hardware that off-loads TCP/IP, iSCSI, FCoE, and iWARP RDMA processing from its host system. T580-CR frees up host CPU cycles for useful applications. The system achieves increased bandwidth, lower latency, and uses less power.

The T580-CR sets itself apart from other 40Gb offerings from Chelsio in that it provides dual paths to the external memory on the adapter, thereby allowing offloaded connections, such as TOE and iSCSI, to achieve the maximum bandwidth provided by the card.
 

Chelsio T580-CR Network Card Dual-Port QSFP+ 40 Gbit T580-CR (PCI Express 3.0 x8)
Network cards
CHF589.–

Chelsio T580-CR Network Card Dual-Port QSFP+ 40 Gbit T580-CR

PCI Express 3.0 x8

4. Chelsio T6225-CR

Chelsio's T6225-CR is a dual-port 1/10/25Gb Ethernet unified wire adapter with a PCI Express 3.0 x8 host bus interface optimised for storage, cloud computing, HPC, virtualisation and other data centre networking applications.

The T6225-CR runs all the host software of its predecessor, the T5, unchanged, so that all previous software investments can continue to be used. It offers all the functions of the T5 plus support for integrated offloads of IPsec, TLS/SSL, DTLS and SMB 3.X Crypto.

The T6225-CR offers sub-microsecond end-to-end latency and offloads a wide range of typical storage, network and cloud protocols from the host CPU. This enables savings in acquisition, power and operating costs of the host CPU and significantly increases system performance.

A large proportion of the offloads enabled by the T6225-CR are based on standard TCP, IP and UDP protocols (such as iSCSI and iWARP) and can therefore be operated with a software peer or replaced with a lower performance software solution, providing the required reliability for enterprise customers and enabling phased installations in the data centre. It works with any existing switch infrastructure and does not rely on new functions such as DCB, PFC, ETS, etc.
 

Chelsio T6225-CR (Mini PCI Express)
Network cards
−9%
CHF729.– was CHF803.–

Chelsio T6225-CR

Mini PCI Express

5. Chelsio T6425-CR - Network adapter - PCIe 3.0 x8

The Chelsio T6425-CR network adapter is a powerful network card designed for modern Ethernet applications. With four SFP28 ports, this adapter allows for a maximum port speed of 25 gigabits per second, making it ideal for data-intensive environments. The PCIe 3.0 x8 interface ensures fast and efficient data transfer, while the compact design allows for easy integration into various systems. The T6425-CR is particularly suited for data centers and businesses that have high bandwidth requirements and need a reliable network connection. Made in Germany, this adapter not only offers high performance but also quality and durability.

- Four SFP28 ports for flexible network connections
- Maximum data transfer rate of 25 Gbit/s
- Compatible with PCIe 3.0 x8 for high performance.
 

Chelsio T6425-CR - Network adapter - PCIe 3.0 x8 (PCI Express 3.0 x8)
Network cards
CHF669.–

Chelsio T6425-CR - Network adapter - PCIe 3.0 x8

PCI Express 3.0 x8

6. Chelsio Network Card Quad-Port SFP+ 10 Gbit LP T540-LP-CR

The Chelsio Quad-Port SFP+ 10 Gbit LP T540-LP-CR network card is a powerful Ethernet solution designed specifically for high-traffic applications. With four ports supporting speeds of up to 10 Gbit/s, this network card enables efficient data transfer and is ideal for servers and network devices that require high bandwidth. The card utilizes a PCI Express x8 Gen 3 interface, ensuring a fast and reliable connection. Thanks to its low-profile design, it is also suitable for compact cases, making it a flexible choice for various system configurations. The SFP+ ports provide additional flexibility in selecting network connections and cables to meet the specific requirements of the infrastructure.

- Supports speeds of up to 10 Gbit/s per port
- Offers four SFP+ ports for flexible network connections
- Compatible with PCI Express x8 Gen 3 for high data transfer rates.
 

Chelsio Network Card Quad-Port SFP+ 10 Gbit LP T540-LP-CR (PCI-E x8)
Network cards
CHF609.–

Chelsio Network Card Quad-Port SFP+ 10 Gbit LP T540-LP-CR

PCI-E x8