Best Renkforce products in the Motion sensors category
On this page you'll find a ranking of the best Renkforce products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Renkforce ST44 Motion detector
The ST44 motion sensor from Renkforce uses passive infrared (PIR) to activate connected devices. You can set how long and at what ambient light level the connected devices will be turned on.
2. Renkforce Recessed ceiling motion detector 360°
For installation, you need a ceiling cutout of 63 mm. The installation is as simple as with ceiling-mounted halogen spotlights. You can set the desired response threshold of the motion detector from approximately 3 Lux to 2000 Lux using the dusk setting on the sensor. With the time setting, the lighting duration of the device can be adjusted between 10 seconds and 15 minutes.
3. Renkforce Motion detector 180°
With a detection angle of 180°, this motion sensor can switch incandescent lamps up to 1200 W and fluorescent lamps up to 300 W. The dusk sensor is infinitely adjustable.
4. Renkforce 4016139070186 Flush-mounted PIR-Be
For installation in flush-mounted boxes and as a replacement for the existing light switch.
5. Renkforce Motion detector 751560
People, animals, and moving cars emit warmth that differs from the surrounding temperature within the detection range of the sensor. The renkforce PIR motion detector quickly and reliably detects these changes thanks to dual-sensor technology and triggers the pre-set switching process when someone moves through its detection area. The motion detector has been specifically designed to secure private, commercial, and industrial properties. With selectable NO (normally open) and NC (normally closed) circuits, the detector can be used both in combination with an alarm system (e.g., in entry areas) and for automatic lighting control in stairwells. Additionally, the motion detector features a built-in tamper switch that automatically triggers a circuit if someone attempts to tamper with its housing. This manipulation detection is crucial for efficient protection when used in an alarm system. The motion detector offers various settings, allowing you to choose whether the circuit should trigger immediately upon detecting movement or only after two movements are detected within 10 seconds. This is particularly helpful in preventing false alarms due to unfavorable environmental conditions. A blinking LED on the housing indicates detected movements but can be completely deactivated if it is bothersome. Switching between NO and NC circuits can also be done easily at any time, depending on your requirements. Special feature: tamper protection.
6. Renkforce Decke, Wand HF-Bewegungsmelder
The detection works through high-frequency technology, even through doors, glass panes, or thin walls. It is ideal for monitoring your entrance area or stairwell. High-frequency detectors emit an imperceptible signal and respond independently of temperature to changes in the echo image caused by movement. With its wide detection range, almost instantaneous response, and an adjustable range from 1 m to 15 m, it is suitable for challenging spatial situations. You can connect a light to the output of the motion detector, which will automatically turn on the light when movement is detected. The duration of the light activation can be set individually. The motion detector can penetrate plastics, wood, glass, and masonry (up to 30 cm).
7. Renkforce Ceiling, surface-mounted PIR motion sensor
No matter from which direction you enter the detection area of this PIR detector - thanks to the clever "all-round detection", the connected lamp is always reliably switched on. You can set the light duration individually. Thus, this motion detector is perfect for hallways and stairwells. With a mounting height of 2.2 - 4 m, you achieve an all-round detection of 360° in a radius of approx. 6 m.
8. Renkforce High frequency ceiling motion detector
The Renkforce high-frequency ceiling motion detector is an innovative device designed for reliable motion detection indoors. Thanks to high-frequency technology, this motion detector can operate through various materials such as doors, glass panes, and thin walls, making it particularly versatile. With a detection angle of 360 degrees and a range of up to 8 meters, it offers comprehensive monitoring of the desired area. The motion detector is suitable for ceiling installation and can be easily integrated into existing smart home systems. The IP20 protection rating ensures that the device is suitable for indoor use and is protected against dust and contact. The high-frequency ceiling motion detector is a practical solution for anyone seeking efficient and reliable motion monitoring in their premises.
- High-frequency technology enables detection through materials such as doors and glass panes
- 360-degree detection angle for comprehensive monitoring
- Range of up to 8 meters
- Compatible with smart home systems
- Easy ceiling installation for versatile applications.
9. Renkforce High-frequency motion detector 180
The detection works through high-frequency technology, even through doors, glass panes, or thin walls. Depending on the nature of the obstacles, the signals are attenuated more or less. The motion detector emits high-frequency signals, similar to radar, which are reflected back from surfaces within the detection range. These signals are analyzed by the integrated electronics. If these signals change, for example due to movement (human, animal, or object), the detector is triggered.
10. Renkforce RS2W Radio motion detector for outdoor use
With this wireless motion switch, the switches of the RS2W wireless switch system can be controlled automatically. Thanks to battery power, the motion detector can be easily placed in protected outdoor areas.
