Best Voltcraft products in the Metrology category

On this page you'll find a ranking of the best Voltcraft products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Voltcraft Temperatur-Datenlogger, Luftfe

The data logger enables the (long-term) recording of air temperature and relative humidity. Ready to start immediately without software The device can be configured using a browser. The link is located on the logger. The automatic report function enables the output of the measurement series as a PDF file when connected to a PCÂ, Mac or printer. Evaluate without software As soon as the data recording is finished and the data logger is connected to a USB interface, a PDF file and additionally a spreadsheet file are generated automatically. The PDF report contains general information about the unit, data logger settings, alarm status and a graph showing the measured values during the recorded time. Value tables for further processing are generated by the logger in a CSV file. The logger is compatible with VOLTSOFT, but this software is not usually required. Large display The current as well as min and max measurement data can be shown directly on the logger via the integrated display. In addition, the logger ID can be called up - especially if several loggers are to be used simultaneously. The LC display can also be deactivated to save energy. Individual start-stop modes The data logger allows up to 13 different programming of the start-stop conditions. Thus, the logger can be individually adapted to your needs. Examples are: Start immediately, Start after delay time, Start after time, Start after key press, etc. LED alarm indicators When this function is activated, two-colour LED alarm indicators give you a quick overview of limit value violations without having to view the stored data in detail. This function can also be deactivated to save energy. 

Voltcraft Temperatur-Datenlogger, Luftfe (Thermometers)
Metrology
CHF72.90

Voltcraft Temperatur-Datenlogger, Luftfe

Thermometers

2. Voltcraft Temperature Data Logger DL-200T

The data logger enables the (long-term) recording of air temperature. Ready to go without software The device can be configured using a browser. The link is located on the logger. The automatic report function enables the output of the measurement series as a PDF file when connected to a PCÂ, Mac or printer. Evaluate without software As soon as the data recording is finished and the data logger is connected to a USB interface, a PDF file and additionally a spreadsheet file are generated automatically. The PDF report contains general information about the unit, data logger settings, alarm status and a graph showing the measured values during the recorded time. Value tables for further processing are generated by the logger in a CSV file. The logger is compatible with VOLTSOFT, but this software is not usually required. Large display The current as well as min and max measurement data can be shown directly on the logger via the integrated display. In addition, the logger ID can be called up - especially if several loggers are to be used simultaneously. The LC display can also be deactivated to save energy. Individual start-stop modes The data logger allows up to 13 different programming of the start-stop conditions. Thus, the logger can be individually adapted to your needs. Examples are: Start immediately, Start after delay time, Start after time, Start after key press, etc. LED alarm indicators When this function is activated, two-colour LED alarm indicators give you a quick overview of limit value violations without having to view the stored data in detail. This function can also be deactivated to save energy. 

Voltcraft Temperature Data Logger DL-200T (Thermometers)
Metrology
CHF54.95

Voltcraft Temperature Data Logger DL-200T

Thermometers

3. Voltcraft Measuring adapter

Universal three-phase current adapter which, in conjunction with all VDE 0100 test instruments, enables the following measurements to be made on three-phase current sockets: low impedance of PE, insulation resistance between all active conductors and against PE, internal system resistance, loop impedance, RCD parameters and rotary field direction. CEE 16 A three-phase plug with feed-through to 5 separate 4 mm sockets for L1, L2, L3, N and PE for quick and safe connection of test equipment to three-phase sockets during tests according to DIN VDE 0100 (fixed installations). 

Voltcraft Measuring adapter (Adapter)
Metrology
CHF79.95

Voltcraft Measuring adapter

Adapter

4. Voltcraft Voltage data logger DL 250V

It was designed for monitoring and recording measured voltage data. The recording of this voltage data logger, whose capacity is designed for storing a large number of measurement data, is based on adjustable criteria.Individually configurable via browserThe configuration of the logger can be carried out individually and according to requirements via the web browser. As soon as the data recording is completed and the logger is connected to a USB interface, a PDF file and an additional spreadsheet file are automatically generated. This record contains general information about the device, the data logger settings, the alarm status and a graph showing the measured values during the recorded time. 

Voltcraft Voltage data logger DL 250V (Measuring device case)
Metrology
CHF67.95

Voltcraft Voltage data logger DL 250V

Measuring device case

5. Voltcraft Temperature data logger Dl 240K

Ready to start immediately without software The device can be configured using a browser. The link is located on the logger. The automatic report function enables the output of the measurement series as a PDF file when connected to a PC®, Mac or printer. Evaluate without software As soon as the data recording is finished and the data logger is connected to a USB interface, a PDF file and additionally a spreadsheet file is generated automatically.The PDF report contains general information about the device, data logger settings, alarm status and a graph showing the measured values during the recorded time. Value tables for further processing are generated by the logger in a CSV file. The logger is compatible with VOLTSOFT, but normally this software is not required. Large display The current as well as min and max measurement data can be displayed directly on the logger via the integrated display. In addition, the logger ID can be called up - especially if several loggers are to be used simultaneously. The LC display can also be deactivated to save energy.Individual start-stop modes The data logger allows up to 13 different programming of the start-stop conditions. Thus, the logger can be individually adapted to your needs. Examples are: Start Immediately, Start After Delay Time, Start After Time, Start After Key Press, etc.LED Alarm Indicators When this function is activated, two-color LED alarm indicators give you a quick overview of limit violations without having to view the stored data in detail. This function can also be deactivated to save energy.Free probe selectionOptionally, any K-type probe can be connected to the logger. Thus, measurements of temperatures up to 1370°C are possible - depending on the probe version. The logger electronics is prepared for all K-type probe types. 

Voltcraft Temperature data logger Dl 240K
Metrology
CHF60.95

Voltcraft Temperature data logger Dl 240K

6. Voltcraft Temperature adapter -40 to 250 °C Sensor type K

VOLTCRAFT temperature adapter -40 to 250°C sensor type K.

Voltcraft Temperature adapter -40 to 250 °C Sensor type K
Metrology
CHF8.60

Voltcraft Temperature adapter -40 to 250 °C Sensor type K

7. Voltcraft 80 MHz dual channel arbitrary signal generator with touch screen operation

Two-channel arbitrary function generator FG-30000T with touch screen. This arbitrary function generator produces stable, accurate and clean output signals with a bandwidth of 80 MHz, real-time sampling of 1.25 GS/s (max.) and a frequency resolution of 1 μHz thanks to its digital signal generation (DDS technology). The generator handles 6 basic signal groups (sine, square, ramp, noise and harmonics) as well as 152 integrated arbitrary signals (1 μHz - 50 MHz) with a vertical resolution of 14 bit. It also offers numerous modulation options, including AM, FM, FSK, 3FSK, PSK, OSK, ASK, BPSK, PWM, sweep and burst. All signal parameters and settings are displayed on an 8 (20.32cm) TFT LCD 800 x 600 touchscreen display via a user-friendly graphical interface. 

Voltcraft 80 MHz dual channel arbitrary signal generator with touch screen operation
Metrology
CHF824.95

Voltcraft 80 MHz dual channel arbitrary signal generator with touch screen operation

8. Voltcraft VC GT 6001 32A Adapter plug measuring adapter 3-phase CEE 32 A 1 pc.

VOLTCRAFT VC GT 6001 32A adapter plug measuring adapter 3-phase CEE 32 A 1pc.

Voltcraft VC GT 6001 32A Adapter plug measuring adapter 3-phase CEE 32 A 1 pc. (Adapter)
Metrology
CHF529.95

Voltcraft VC GT 6001 32A Adapter plug measuring adapter 3-phase CEE 32 A 1 pc.

Adapter

9. Voltcraft Multifunction calibrator

Bringing measuring instruments up to reference standards Whether in manufacturing, research and teaching or in the trades - accurate measured values are the prerequisite for correct findings and the resulting procedures. Therefore, measuring instruments should be calibrated at regular intervals to be sure that measured values are actually accurate. The MFK-2000 multifunction calibrator from Voltcraft works in a range from -200 to +1372 degrees Celsius. In addition, DC current and resistance measurements can be carried out and the calibrator can also be used as a source. The output and measurement accuracy is up to 0.02 %. Furthermore, automatic step or slope measurements are possible and a variety of thermocouples (R, S, K, E, J, T, N, B, L, U) and thermal resistors (Pt100-385, Pt100-392, Pt100-JIS, Pt200-385, Pt500-385, Pt1000, CU10, CU50, CU100, Ni120) can be used. The handy VC MFK-2000 is extremely user-friendly: the screen brightness can be individually adjusted and data can be transferred via USB cable. In addition, the working modes used can be saved and thus easily and quickly recalled when needed. Extensive accessories In addition to the meter, a pair of test leads, crocodile clips and adapter clips as well as a USB cable and six AA NIMH batteries are included. The package is rounded off by a user manual and a practical carrying case. 

Voltcraft Multifunction calibrator (Thermometers)
Metrology
CHF799.95

Voltcraft Multifunction calibrator

Thermometers

10. Voltcraft Hand Counter Digital

Long operating time due to replaceable lithium button cell. Ideal as access counter at events, goods or production counter.

Voltcraft Hand Counter Digital
Metrology
CHF16.45

Voltcraft Hand Counter Digital