Best Walimex pro products in the Lamp tripods category

On this page you'll find a ranking of the best Walimex pro products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Walimex pro Per WT-501

With this boom stand from walimex you get a very practical and stable boom stand with telescopic boom arm. It also offers convincing stability during the assembly of medium-heavy equipment. The maximum payload of 5 to 3 kg (depending on the extension length) is achieved by the stable telescopic tripod segments with diameters of 30 and 26 mm. The boom element of the walimex WT-501 can be pulled out from the length of 115 to 215 cm by the 2 installed segments. The built-in mounting adapter offers a comfortable mounting of your equipment on the telescopic arm, because it can be easily removed from the bracket and you can mount your equipment here with a 5/8 inch spigot (16 mm pin) and a 1/4 thread. The walimex pro WT-501 Boom Stand is a cost-effective solution for setting highlights or generally for illumination from above. The range of illumination of your studio flashes is hereby extended by a further dimension. Your equipment is held in the balance by a counterweight weighing 4.4 kg. Spring-loaded boom stand with variable angle adjustment and an extension height of 100 to 410 cm. This boom stand can be adjusted in height from ground level to approx. 410 cm. By the variable angle adjustment of the telescopic arm you can move your equipment in seconds both near the ground and over the heads of your models. The boom is attached to the supplied lamp tripod with the aid of a robust clamp bracket. The boom holder is very solid and has two practical fixing levers. The holder allows the boom to be connected to stand tubes from 22 to 35 mm in diameter. The bracket allows a 360 degree adjustment of the boom and thus offers a simple and very practical solution for your light placement. The spring damping of the central column elements of the tripod facilitates the work and prevents a too fast, uncontrolled lowering of your installed equipment. This additional feature keeps your photo and video equipment such as studio flashes, LED lights, reflectors, backgrounds or softboxes very safe and the light can be precisely aligned. You can create the desired lighting effects at lightning speed, whether you want to set the light from below or create directional light from above for hair and effect lighting. 

2. Walimex pro Per WT-803

The walimex pro WT-803 Lamp Tripod 200cm is ideal for beginners in studio photography. The very well processed tripod is portable and flexible with a net weight of less than 1kg and a transport size of approx. 71cm. You can use studio flashes or reflectors up to a weight of approx. 2.5kg on this tripod. With the standard spigot connection 5/8 inch with 1/4 and 3/8 inch thread, the studio tripod is suitable for all common, smaller studio lights and studio flashes. 

Walimex pro Per WT-803 (200 cm, 3.50 kg)
Lamp tripods
22.– CHF

Walimex pro Per WT-803

200 cm, 3.50 kg

3. Walimex pro pro lamp tripod AIR with air damping

The walimex pro Lamp Tripod AIR is a high-quality solution for the studio photographer. The very well processed Tripod is with only approx. 2,15kg own weight and a transport size of almost 120cm portable and flexible applicable. You can use studio flashes or reflectors up to a weight of 8kg on this tripod. The air damping is the special highlight of this tripod, as it provides the necessary safety when lowering the single tripod links. With the standard spigot connection of 5/8 inch with 1/4 inch thread, the studio tripod is suitable for all common studio lights and studio flashes. 

Walimex pro pro lamp tripod AIR with air damping (355 cm, 8 kg)
Lamp tripods
50.40 CHF

Walimex pro pro lamp tripod AIR with air damping

355 cm, 8 kg

4. Walimex pro pro 23111 Holder folding reflector

Product information "Walimex pro Holder Folding Reflector" Holder for folding reflectors, backgrounds and decorative material With aluminum spigot connection for mounting on lamp tripods For reflectors, deco and backgrounds up to 1.5 cm thick Practical support for all who work alone in the studio or on location Easy handling and positioning Indispensable studio helpers With this practical set of 2, various backgrounds, folding reflectors or decorative elements can be attached to lamp tripods. Ideal for all those who work alone in the studio or on location and thus have no hand free. Thanks to the 5/8 inch aluminum spigot connection, these holders fit all common lamp tripods. Stepless adjustment up to 1.5 cm width The stepless adjustment allows to fix backgrounds or reflectors with a max. thickness of 1.5 cm. The hook-shaped clamp securely grips matching profiles and holds them reliably. Rods, ropes or cables can also be clamped, making it easier to attach decorative materials such as fairy lights or light nets. Versatile holder with one-hand operation Thanks to the one-hand operation, it is possible for a single person to hold the background and at the same time fix it very easily with this clamp. The handling is very easy and allows a flexible positioning. Textile backgrounds can be clamped without a crossbar. Application: on location, outdoor , portrait photography Weight: 60g Material of the product: aluminum , plastic General information Width 25mm Devices/product type Clamp Weight 60g Height 60mm Length 75.8mm Material of the product Aluminum, plastic Product color Black/silver Technical data Application: on location, outdoor, portrait photography Clamping range 0 - 1.5cm Possible connections 5/8 inch spigot Article packaging Width of the packaging 71mm Weight incl. packaging 84g Belt dimension 445mm Height of the packaging 116mm Length of the packaging 71mm Scope of delivery: 1x Walimex pro holder folding reflector. 

Walimex pro pro 23111 Holder folding reflector
Lamp tripods
9.70 CHF

Walimex pro pro 23111 Holder folding reflector

5. Walimex pro per wall ceiling mount

For studios where some setups are used often or constantly, the fixed installation of a tripod is a good idea. Also, a wall / ceiling tripod like this one is particularly suitable for cramped conditions, since no protruding tripod legs take up space on the floor. The tripod has a load capacity of up to approx. 6 kg. You can extend the 2 cm thick rod between 34 and 54 cm. The 5/8 spigot is equipped with a 1/4 inch threaded connection on one side and a 3/8 inch threaded connection on the other. It can be mounted standing, hanging or even sideways. This gives you a lot of flexibility when setting it up. Included with the tripod are four heavy-duty anchors for concrete and matching mounting screws. Due to the high load capacity of the stand and the resulting relatively large lever, strong forces are generated at the base. Therefore, make sure that your wall is also designed for such loads. Brick walls, for example, are either not suitable for such forces or must be prepared with chemical dowels or liquid dowels. You should therefore obtain information from a building supply store before installation. The same applies to the tensile load for ceiling mounting. The mounting plate of the stand has two holes of different sizes in each of the four corners. This means that there is a choice of different mounting options. 

Walimex pro per wall ceiling mount (54 cm, 6 kg)
Lamp tripods
25.70 CHF

Walimex pro per wall ceiling mount

54 cm, 6 kg

6. Walimex pro Per rolling tripod

The highlight of this system is that they have many application possibilities. For example, you can very quickly build a striplight from two small softboxes by simply placing them on top of each other. Due to the very stable and smooth-running rubber wheels it is very flexible to handle and perfectly suitable for the studio. The clamp holders guarantee a load capacity of approx. 12kg. They are easily adjustable in height with a quick handle and each of them has a 5/8 inch spigot connection. 

Walimex pro Per rolling tripod (223 cm, 12 kg)
Lamp tripods
155.– CHF

Walimex pro Per rolling tripod

223 cm, 12 kg

7. Walimex pro pro 23090 floor lamp tripod BL-K + center column

Walimex pro Floor Lamp Tripod BL-K + Centre Column LSM 45, 55 cm (23090).

Walimex pro pro 23090 floor lamp tripod BL-K + center column (15 kg)
Lamp tripods
33.70 CHF

Walimex pro pro 23090 floor lamp tripod BL-K + center column

15 kg

8. Walimex pro pro 23112 Holder folding reflector set of 2

Product information "Walimex pro Holder Folding Reflector Set of 2" Set of 2 Holders for folding reflectors, backgrounds and decorative material With aluminum spigot connection for mounting on lamp tripods For reflectors, deco and backgrounds up to 1.5 cm thick Practical support for all who work alone in the studio or on location Easy handling and positioning Indispensable studio helpers With this practical set of 2, various backgrounds, folding reflectors or decorative elements can be attached to lamp tripods. Ideal for all those who work alone in the studio or on location and thus have no hand free. Thanks to the 5/8 inch aluminum spigot connection, these holders fit all common lamp tripods. Stepless adjustment up to 1.5 cm width The stepless adjustment allows to fix backgrounds or reflectors with a max. thickness of 1.5 cm. The hook-shaped clamp securely grips matching profiles and holds them reliably. Rods, ropes or cables can also be clamped, making it easier to attach decorative materials such as fairy lights or light nets. Versatile holder with one-hand operation Thanks to the one-hand operation, it is possible for a single person to hold the background and at the same time fix it very easily with this clamp. The handling is very easy and allows a flexible positioning. Textile backgrounds can be clamped without a crossbar. Area of application: on location, outdoor , portrait photography Weight: 60g Material of the product: aluminum , plastic General information Width 25mm Devices/product type Clamp Weight 60g Height 60mm Length 75.8mm Material of the product Aluminum, plastic Product color Black/silver Technical data Area of application: on location, outdoor , portrait photography Clamping range 0 - 1.5cm Possible connections 5/8 inch spigot Article packaging Width of the packaging 71mm Weight incl. packaging Packaging 146g Girth 445mm Height of packaging 116mm Length of packaging 71mm Scope of delivery: 1x Walimex pro holder folding reflector set of 2. 

Walimex pro pro 23112 Holder folding reflector set of 2 (6 cm)
Lamp tripods
Quantity discount
14.70 CHF

Walimex pro pro 23112 Holder folding reflector set of 2

6 cm

9. Walimex pro pro FW-806 AIR Tripod Castors Pro

The walimex pro FW-806 Lamp Tripod AIR is a high-quality solution for the studio photographer. The very well processed Tripod is portable and flexible with only approx. 1.8kg own weight and a transport size of approx. 100cm. You can use studio flashes or reflectors up to a weight of 6kg on this tripod. The air damping is the special highlight of this tripod, as it provides the necessary safety when lowering the individual tripod links. With the standard spigot connection of 5/8 inch, the Studio Tripod is suitable for all common studio lights and studio flashes. The three walimex Tripod Castors Pro are ideal in use on wood as well as on carpeted floors. As an addition to your tripod, they serve a quick change of location of the lighting without cumbersome carrying of the tripods. 

Walimex pro pro FW-806 AIR Tripod Castors Pro (28.50 cm, 6 kg)
Lamp tripods
82.90 CHF

Walimex pro pro FW-806 AIR Tripod Castors Pro

28.50 cm, 6 kg

10. Walimex pro Pro Boom Tripod

The range of illumination of your studio flashes is hereby extended by a further dimension. This extremely compact and versatile extension arm can be used to attach light to medium-heavy equipment such as studio flashes, video lights, softboxes, backgrounds, reflectors, umbrellas or microphones simply and reliably. With this boom stand you can place your equipment very variably close to the ground or, with completely extended telescope segments, at a height of up to 4 m. The extension arm of this boom tripod from walimex pro can be used extremely variably and with its minimum length of 70 cm it can also be used in confined spaces. The length of the boom can be adjusted from 70 to 183 cm via two extendable sections. 

Walimex pro Pro Boom Tripod (400 cm, 2.50 kg)
Lamp tripods
73.90 CHF

Walimex pro Pro Boom Tripod

400 cm, 2.50 kg