Best selling Heat shrink tubing from CellPack
On this page you'll find a ranking of the best CellPack products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. CellPack Heat shrink tubing without adhesive W
Self-extinguishing, flexible, and uncoated. For insulating, bundling, or marking. Made from polyolefin. Easy retraction of the hose through a return mechanism. Protection against corrosion. Shrink ratio 3:1 (12 mm - 4 mm).
2. CellPack End cap
Cellpack End Cap SKH/75-30 in black
Manufacturer: Cellpack
Description: End cap for the range of 75-30 mm
Type: SKH/75-30 in black
Type: Heat shrink
Design: Thick-walled
Shrink ratio: 3:1
Inner diameter before shrinkage: 75 mm
Inner diameter after shrinkage: 30 mm
Total length after shrinkage: 148 mm
Wall thickness after shrinkage: 4.4 mm
Transparent: no
Operating temperature: -30 to 135 °C
Color: black
Material: Polyolefins (PO-X)
Halogen-free: yes
With internal adhesive: yes
Printable: yes
UL approval: no
The heat shrink end cap provides pressure and moisture protection for cables, lines, and pipes.
Applications: Pressure and moisture protection for cables, lines, and pipes.
Properties: Resistant to chemical influences, stabilized against UV rays, free from paint-wetting impairment substances, halogen-free, absolutely moisture-tight, pressure-tight, very good electrical properties, good mechanical strength.
Delivery includes: Heat shrink end cap.
EAN: 4010311020754.
3. CellPack Heat shrink tubing
Cellpack heat shrinkable tubing SR1F3 39-13/1000sw
Description: Heat shrinkable tubing without adhesive, in 1m cut.
Type: SR1F3 39-13/1000sw
Design: Thin-walled
Shrink rate: 3:1
Inner diameter before shrink: 39 mm
Inner diameter after shrink: 13 mm
Nominal diameter in inches: Other
Wall thickness after shrink: 1.15 mm
Length: 1 m
Operating temperature: -55 to 135 °C
Color: Black
Transparent: No
Material: Polyolefins (PO-X)
Halogen-free: No
With inner adhesive: No
Printable: Yes
UL approval: Yes
Fields of application: Insulating, bundling, labeling, protection against corrosion, mechanical protection.
Properties: Thin-walled, without thermoplastic adhesive, can be labeled, resistant to chemical influences, stabilized against UV radiation, free of paint wetting impairment substances, non-corrosive, infusible, high flexibility, very good electrical properties, high tensile strength, cold flow resistant (heat distortion resistant), self-extinguishing (except transparent).
Scope of supply: Heat shrinkable tubing thin wall as sections.
EAN: 4010311035031.
4. CellPack Heat shrink tubing without adhesive S
The CellPack heat shrink tubing in a dispenser box is a versatile solution for various applications that require reliable insulation, bundling, and labeling. This thin-walled shrink tubing features a shrink ratio of 2:1 and is self-extinguishing, making it a safe choice for use in different environments. The tubing is made from polyolefin and offers a high temperature resistance of -55 to 135 degrees Celsius. The practical dispenser box allows for easy handling and efficient use of the material. The retention notch ensures that the tubing does not roll back during use, enhancing user-friendliness. With a length of 10 meters, this shrink tubing is ideal for projects that require a flexible and adaptable solution.
- Self-extinguishing and safe to use
- Easy handling with return mechanism
- Retention notch prevents unwanted rolling back
- High temperature resistance of -55 to 135 °C
- Suitable for insulation, bundling, and mechanical protection.
5. CellPack Heat shrink tubing without adhesive B
The SB 2:1 heat shrink tubing is thin-walled, without thermoplastic adhesive, with a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences as well as providing good mechanical protection.
6. CellPack Heat shrink tubing without adhesive G
Cellpack Heat Shrink Tubing SB 19.1-9.5 gg
Manufacturer: Cellpack
Description: Heat shrink tubing in a dispenser box 7m
Type: SB 19.1-9.5 gg
Type: Heat shrink
Design: thin-walled
Shrink ratio: 2:1
Inner diameter before shrinking: 19.1 mm
Inner diameter after shrinking: 9.5 mm
Nominal diameter in inches: 3/32 inch
Wall thickness after shrinking: 0.76 mm
Length: 7 m
Operating temperature: -55..135 °C
Color: green/yellow
Transparent: no
Material: Polyolefin (PO-X)
Halogen-free: no
With internal adhesive: no
Printable: yes
UL approval: yes
The heat shrink tubing of type SB 2:1 is thin-walled, without thermoplastic adhesive, with a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences as well as providing good mechanical protection.
7. CellPack 143665
The CellPack heat shrink tubing is an effective solution for repairing sheath damage on plastic and rubber insulated cables and wires. Equipped with shrink technology, this tubing provides reliable sealing and insulation that meets the demands of various applications. The tubing has a diameter of 130 mm before shrinking and reduces to 30 mm after application, allowing for flexible adjustment to different cable sizes. With a length of 750 mm, it offers ample material for various repair needs. Made in Germany, the CellPack heat shrink tubing stands for quality and durability, making it a preferred choice for professionals and DIY enthusiasts.
- Effective repair of sheath damage on cables and wires
- Flexible diameter before and after shrinking
- Made in Germany for high quality and reliability.
8. CellPack Heat shrink sleeve
Cellpack Heat Shrink Sleeve SRMAHV 28-10/750 black
Manufacturer: Cellpack
Description: Heat shrink sleeve 28-10 mm, L=750 mm
Type: SRMAHV 28-10/750 black
Design: Shrink sleeve
Inner diameter before shrinking: 32 mm
Inner diameter after shrinking: 10 mm
For cable outer diameters: 10 to 28 mm
Length: 750 mm
Reinforced construction: yes
Wall thickness: 2.3 mm
Halogen-free: yes
UV resistant: yes
Additional details: For repairing sheath damage on all plastic and rubber insulated cables and wires.
9. CellPack CELL CHE-3I(A) 12kV 25-95 Internal space closure 12kV, 3-L
The CELL CHE-3I(A) 12kV 25-95 indoor end seal is a high-quality heat shrink tubing specifically designed for use with 3-core plastic cables. This end seal is suitable for cables with a rated voltage of up to 12 kV and provides a reliable and secure connection. It is compatible with various cable types, including PVC, PE, VPE, and EPR, and supports different conductor layers and shielding designs. The end seal is suitable for both crimp and screw cable lugs, making it a flexible solution for various applications. With a length of 300 mm, it offers sufficient material for effective sealing and insulation. Manufactured in Germany, this end seal meets high-quality standards and ensures long-term performance in demanding environments.
- Suitable for 3-core plastic cables with a rated voltage of up to 12 kV
- Compatible with various cable materials such as PVC, PE, VPE, and EPR
- Supports different conductor layers and shielding designs
- Manufactured in Germany according to high-quality standards.
10. CellPack SRBB/120-40/1000MM/B
The SRBB type heat shrink tubing is medium-walled, without thermoplastic adhesive, with a shrink ratio of 3:1. Typical applications include medium voltage switchgear up to 36 kV as well as protection against corrosion.
